EDP Sciences logo
Subscriber Authentication Point
Search
Menu
All issues Metall. Res. Technol., 116 5 (2019) 502 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Design of a new oxygen lance to improve molten pool multi-phase flow characteristics with optimization based on numerical simulations

Haowei Yan, Jun Chen, Chao Li, Xiaoli Su, Pengyue Guo, Xizhong An and Hao Zhang
Advanced Powder Technology 36 (6) 104896 (2025)
https://doi.org/10.1016/j.apt.2025.104896

Evaluation of Multi-hole Supersonic Oxygen Jets Behaviors with Combustion in a BOF Converter: Toward a Numerical Simulation

Yu Zhang, Guoqing Chen, Qiang Yue and Xiaobin Zhou
Metallurgical and Materials Transactions B (2025)
https://doi.org/10.1007/s11663-025-03568-x

Effect of Oxygen Lance Copper Tip Position Management on Corrosion of MgO–C Refractory Lining in Basic Oxygen Furnace During Campaign

Jaroslav Demeter, Branislav Buľko, Peter Demeter, Martina Hrubovčáková and Dáša Chudíková
Applied Sciences 15 (9) 5109 (2025)
https://doi.org/10.3390/app15095109

Effect of Furnace Lining Structure on the Flow Field in the 35t Top-blowing Converter Steelmaking Process

Fuhai Liu, Run Mou, Rong Zhu, Chen Sun, Kai Dong, Guangsheng Wei, Xing Du and Yu Chen
ISIJ International 64 (9) 1384 (2024)
https://doi.org/10.2355/isijinternational.ISIJINT-2023-468

Flow Field of Supersonic Oxygen Jet Generated by Various Wear Lengths at the Laval Nozzle Exit

Fuhai Liu, Songchao Lu, Sibao Zeng, Rong Zhu, Guangsheng Wei and Kai Dong
Coatings 14 (11) 1444 (2024)
https://doi.org/10.3390/coatings14111444

Variation in Multiphase Flow Characteristics by Single-Flow Post-combustion Oxygen Lance Blowing in BOF Steelmaking

Chao Liu, Shu-Guo Zheng and Miao-Yong Zhu
Metallurgical and Materials Transactions B 54 (3) 1245 (2023)
https://doi.org/10.1007/s11663-023-02757-w

Research Progress on Injection Technology in Converter Steelmaking Process

Ming Lv, Shuangping Chen, Lingzhi Yang and Guangsheng Wei
Metals 12 (11) 1918 (2022)
https://doi.org/10.3390/met12111918

Variation in Multiphase Flow Characteristics by Nozzle‐Twisted Lance Blowing in Converter Steelmaking Process

Ming Lv, Hang Li, Xiangdong Xing, Tengchang Lin, Shaoyan Hu and Kun Xie
steel research international 93 (2) (2022)
https://doi.org/10.1002/srin.202100409

Behavior of Top-Blown Jet under a New Cyclone Oxygen Lance during BOF Steelmaking Process

Jun Li, Zheng Ma, Chaoyun Chen, Jieyu Zhang and Bo Wang
Processes 10 (3) 507 (2022)
https://doi.org/10.3390/pr10030507

Study on jet characteristics of a dual-structure converter oxygen lance based on hydrodynamics

Hongbin Jia, Yanxin Li, Kun Liu and Lianghua Feng
AIP Advances 12 (7) (2022)
https://doi.org/10.1063/5.0091437

Turbulence Calculations of a Dual-Structure Oxygen Lance for Converter Based on Hydrodynamics

Hongbin Jia, Yanxin Li, Peng Han, et al.
Mathematical Problems in Engineering 2021 1 (2021)
https://doi.org/10.1155/2021/5785889

Effect of powder injection rate on the flow field of coherent lime powder injection (C-LPI) for EAF steelmaking

Guangsheng Wei, Rong Zhu, Chao Feng, Lingzhi Yang and Kai Dong
Ironmaking & Steelmaking 48 (5) 534 (2021)
https://doi.org/10.1080/03019233.2020.1816805

Effect of a self-rotating oxygen lance system on mass transfer between slag and molten steel

Qi Gao, Wei Wu, Jian-guo Zhi, Bo Zhang and Xiang-chen Li
Journal of Iron and Steel Research International 28 (2) 152 (2021)
https://doi.org/10.1007/s42243-020-00515-9

Behavior of Gas–Slag–Metal Emulsion with Nozzle‐Twisted Lance in Converter Steelmaking Process

Ming Lv, Hang Li, Tengchang Lin, Kun Xie and Kui Xue
steel research international 92 (10) (2021)
https://doi.org/10.1002/srin.202100103

Jet characteristics of a double-structure oxygen lance and its interaction with the molten pool in BOF steelmaking

Hongbin Jia, Peng Han, Kun Liu, Yanxin Li, Kaijie Ba and Lianghua Feng
AIP Advances 11 (8) (2021)
https://doi.org/10.1063/5.0059583

Jet characteristics of CO2–O2 mixed injection using a dual-parameter oxygen lance nozzle for different smelting periods

Chao Feng, Rong Zhu, Guangsheng Wei, Jianfeng Dong and Kai Dong
High Temperature Materials and Processes 40 (1) 345 (2021)
https://doi.org/10.1515/htmp-2021-0035

Simulation and Application of Submerged CO2-O2 Injection in Electric Arc Furnace Steelmaking: Modeling and Arrangement of Submerged nozzles

Guangsheng Wei, Rong Zhu, Baochen Han, et al.
Metallurgical and Materials Transactions B 51 (3) 1101 (2020)
https://doi.org/10.1007/s11663-020-01816-w

Stages of Improvement for Welded Structures with Five-Nozzle Lance Heads in the Converter Shop of Public Joint Stock Company “Dneprovsky Metallurgical Combine”

S. P. Panteikov
Steel in Translation 50 (11) 756 (2020)
https://doi.org/10.3103/S0967091220110108

Carbon Powder Mixed Injection with a Shrouding Supersonic Oxygen Jet in Electric Arc Furnace Steelmaking

Guangsheng Wei, Rong Zhu, Shufeng Yang, et al.
Metallurgical and Materials Transactions B 51 (5) 2298 (2020)
https://doi.org/10.1007/s11663-020-01920-x

Optimized Scheme for Accelerating the Slagging Reaction and Slag–Metal–Gas Emulsification in a Basic Oxygen Furnace

Zichao Yin, Jianfei Lu, Lin Li, Tong Wang, Ronghui Wang, Xinghua Fan, Houkai Lin, Yuanshun Huang and Dapeng Tan
Applied Sciences 10 (15) 5101 (2020)
https://doi.org/10.3390/app10155101

Simulation and analysis of O2–CaO jet behavior with different shrouding fuel mediums in electric arc furnace steelmaking

Bing-long Zhang, Guang-sheng Wei, Run-zao Liu, Rong Zhu and Rong-fang Su
Journal of Iron and Steel Research International 27 (11) 1259 (2020)
https://doi.org/10.1007/s42243-020-00481-2