Effect of hybrid reinforcement at stirred zone of dissimilar aluminium alloys during friction stir welding
Metall. Res. Technol., 116 6 (2019) 631
Published online: 2019-11-22
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Role of SiC nanoparticle reinforcement in the mechanical and metallurgical characterization of friction stir-welded dissimilar AZ91D and AA6061-T6 joints
Shwetanshu Gaurav, Mohammad Zunaid and Radhey Shyam MishraSādhanā 51 (1) (2026)
https://doi.org/10.1007/s12046-025-03041-0
In Situ Composites Prepared by Friction Stir Processing of Aluminium Alloy: A Review
Mustafa Sh Aljanabi and Omar Hassan MahmoodIndian Journal of Structure Engineering 5 (2) 1 (2025)
https://doi.org/10.54105/ijse.B1322.05021125
DACNN based predicting tensile strength of friction stir welded aluminium alloy joints
T. Prakash, Abhinav, G. Gnanakumar and Elangovan MuniyandyInternational Journal of Machine Learning and Cybernetics 16 (5-6) 3997 (2025)
https://doi.org/10.1007/s13042-024-02494-9
Multi-response Optimization of Friction Stir Welded Reinforced Joints of Dissimilar Aluminum Alloys
Sumit Jain and R. S. MishraTransactions of the Indian Institute of Metals 77 (2) 333 (2024)
https://doi.org/10.1007/s12666-023-03096-9
Experimental investigation on characterization of friction stir processed AZ31-based composite
Chaman Jeet Singh, Baljinder Ram, Jashanpreet Singh, Chander Prakash, Prabhu Paramasivam and Rahul KumarScientific Reports 14 (1) (2024)
https://doi.org/10.1038/s41598-024-66379-1
Feasibility study of friction stir joining of aluminium with carbon fibre reinforced thermoplastic composite
Lasse Malaske, Lucian-Attila Blaga, Luciano Bergmann, Bilal Ahmad, Xiang Zhang and Benjamin KlusemannJournal of Composite Materials 58 (17) 1987 (2024)
https://doi.org/10.1177/00219983241254889
Optimization of processing variables of friction stir welded dissimilar composite joints of AA6061 and AA7075 using response surface methodology
Sumit Jain, R.S Mishra, Husain Mehdi, Rajat Gupta and Amit Kumar DubeyJournal of Adhesion Science and Technology 38 (6) 949 (2024)
https://doi.org/10.1080/01694243.2023.2243682
Parametric Optimization of FSWed Dissimilar Composite Joints of AA7075 and AA6061 Using RSM
R. S. Mishra and Sumit JainTransactions of the Indian Institute of Metals 76 (11) 2993 (2023)
https://doi.org/10.1007/s12666-023-02996-0
Influence of SiC Microparticles and Multi-Pass FSW on Weld Quality of the AA6082 and AA5083 Dissimilar Joints
Sumit Jain, R. S. Mishra and Husain MehdiSilicon 15 (14) 6185 (2023)
https://doi.org/10.1007/s12633-023-02455-x
(2023)
https://doi.org/10.21203/rs.3.rs-2568962/v1
Microstructural Analysis and Mechanical Behaviour of Copper CDA 101/AISI-SAE 1010 Dissimilar Metal Welds Processed by Friction Stir Welding
K. Giridharan, P. Sevvel, B. Stalin, M. Ravichandran and P. SureshkumarMaterials Research 25 (2022)
https://doi.org/10.1590/1980-5373-mr-2021-0430
Microstructural and mechanical behavior of micro-sized SiC particles reinforced friction stir processed/welded AA7075 and AA6061
Sumit Jain and R. S. MishraSilicon 14 (16) 10741 (2022)
https://doi.org/10.1007/s12633-022-01716-5
Effect of Al2O3 nanoparticles on microstructure and mechanical properties of friction stir-welded dissimilar aluminum alloys AA7075-T6 and AA6061-T6
Sumit Jain and R.S. MishraProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 236 (4) 1511 (2022)
https://doi.org/10.1177/09544089211065534
Investigation on the effect of process parameters on mechanical and microstructural properties of AA8011 similar FSW weld joints
Gurijala Chakravarthi, Krishan Giridharan, Balasubramaniam Stalin, Sambandam Padmanabhan, Subramani Sekar, Nagaraj Nagaprasad, Leta Tesfaye Jule and Ramaswamy KrishnarajAdvances in Mechanical Engineering 14 (7) (2022)
https://doi.org/10.1177/16878132221112146
Mechanical and tribological performance of Al-Fe-SiC-Zr hybrid composites produced through powder metallurgy process
G R Raghav, Sheeja Janardhanan, E Sajith, Vidya Chandran and V SruthiMaterials Research Express 8 (1) 016533 (2021)
https://doi.org/10.1088/2053-1591/abdb52
Synthesis and mechanical characterization of Fe–BN–TiC nanocomposites
G R Raghav, R Ashok kumar, D Muthukrishnan, K J Nagarajan, Sajith E and Sruthi VEngineering Research Express 2 (2) 025036 (2020)
https://doi.org/10.1088/2631-8695/ab975f
Tensile and wear behaviour of friction stir welded AA5052 and AA6101-T6 aluminium alloys: effect of welding parameters
G. Kasirajan, Sathish Rengarajan, R. Ashok kumar, et al.Metallurgical Research & Technology 117 (4) 405 (2020)
https://doi.org/10.1051/metal/2020039
Effects of tool pin profile on tensile and wear behaviour of friction stir welded AA6101-T6 and AA1350 alloys
R. Ashok kumar, R. Muneeswaran, M. Saravana Mohan, et al.Metallurgical Research & Technology 117 (5) 503 (2020)
https://doi.org/10.1051/metal/2020045