A review of chamfer technology in continuous casting process
Metall. Res. Technol., 117 2 (2020) 204
Published online: 2020-03-30
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Machine learning techniques for the comprehensive analysis of the continuous casting processes: Slab defects
Nanfu Zong, Tao Jing and Jean-Christophe GebelinIronmaking & Steelmaking: Processes, Products and Applications (2025)
https://doi.org/10.1177/03019233251318492
Digital estimation of the solidifying corner shell in continuous casting mold based on a mathematical model of heat flux
Nanfu Zong, Tao Jing, Jean-Christophe Gebelin, Jun Yang and Fengli ShiJournal of the Brazilian Society of Mechanical Sciences and Engineering 47 (4) (2025)
https://doi.org/10.1007/s40430-025-05491-3
Precipitation behavior and its effect on surface transverse cracks during continuous casting
Peng Lan, Yi-fan Lu, Ying-chun Wang, Li-rui Zhang and Jia-quan ZhangJournal of Iron and Steel Research International 32 (3) 519 (2025)
https://doi.org/10.1007/s42243-024-01412-1
A novel cooling structure of narrow copper plate for small chamfered mold
Guobin Wang, Tao Hongbiao, Keran Zhu, Minglin Wang and Hui ZhangIronmaking & Steelmaking: Processes, Products and Applications (2024)
https://doi.org/10.1177/03019233241273481
Non-Uniform Deformation of Slab during Heavy Reduction Process
Yang Liu and Nan Fu ZongSolid State Phenomena 331 67 (2022)
https://doi.org/10.4028/p-qv0726
Application of a chamfer technology to overcome bulging deformation of slab narrow side during mechanical reduction process
Nanfu Zong, Yang Liu and Tao JingThe International Journal of Advanced Manufacturing Technology 121 (5-6) 3229 (2022)
https://doi.org/10.1007/s00170-022-09558-6
Deformation, Strain and Stress Concentration of Slab Narrow Side Induced by Different Reduction Amount
Yang Liu, Fei Wang and Nan Fu ZongSolid State Phenomena 331 79 (2022)
https://doi.org/10.4028/p-8qkz52
Influence of differential reduction rate in adjacent roll reduction zone on internal cracks of high carbon bloom induced by mechanical soft reduction
Nanfu Zong, Sida Ma, Weizhao Sun, Tao Jing and Zhifang LuProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235 (21) 5653 (2021)
https://doi.org/10.1177/0954406221990059
Analysis of internal cracks in high carbon casting bloom induced by soft reduction process and its improvement using numerical simulations and industrial experiments
Nanfu Zong, Jian Huang, Jun Liu, Sida Ma and Tao JingMetallurgical Research & Technology 118 (1) 102 (2021)
https://doi.org/10.1051/metal/2020079
Controlling centre segregation and shrinkage cavities without internal crack in as-cast bloom of steel GCr15 induced by soft reduction technologies
Nanfu Zong, Jian Huang, Yang Liu, Tao Jing and Zhifang LuIronmaking & Steelmaking 48 (8) 944 (2021)
https://doi.org/10.1080/03019233.2020.1848302
Coarse Columnar Dendrites of GH3039 Nickel-Based Alloy at Diverging Grain Boundaries during Wire and Laser Additive Manufacturing: A Phase Field Simulation
Nan Fu Zong, Wei Zhao Sun, Xing Hong Liang and Tao JingKey Engineering Materials 904 47 (2021)
https://doi.org/10.4028/www.scientific.net/KEM.904.47
Application of a Novel Chamfered Mold to Suppress Corner Transverse Cracking of Micro-Alloyed Steel Slabs
Guoliang Liu, Qing Liu, Chenxi Ji, Bin Chen, Haibo Li and Ke LiuMetals 10 (10) 1289 (2020)
https://doi.org/10.3390/met10101289