Tensile and wear behaviour of friction stir welded AA5052 and AA6101-T6 aluminium alloys: effect of welding parameters
Metall. Res. Technol., 117 4 (2020) 405
Published online: 2020-07-07
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
DACNN based predicting tensile strength of friction stir welded aluminium alloy joints
T. Prakash, Abhinav, G. Gnanakumar and Elangovan MuniyandyInternational Journal of Machine Learning and Cybernetics 16 (5-6) 3997 (2025)
https://doi.org/10.1007/s13042-024-02494-9
Taguchi optimization study on friction stir weld parameters for enhancing dissimilar joint strength of AA8011 and AA5052
K. Satyanarayana, B. Prasanna, B. Vaishnavi, Ch. Kavya, M. Vinolika and Murahari KolliInternational Journal on Interactive Design and Manufacturing (IJIDeM) 19 (6) 3957 (2025)
https://doi.org/10.1007/s12008-024-01977-x
Characteristics of Dissimilar AA5083 and AA7050 Aluminium Alloys Friction Stir Butt Welded with Different Tool Axis Offsets
K. Subrahmanian, VR. Rajeev, VB. Renjith and KK. RamachandranJournal of Inorganic and Organometallic Polymers and Materials 35 (3) 2064 (2025)
https://doi.org/10.1007/s10904-024-03418-4
Optimization of Multi Response Process Parameters in Friction Stir Processing of AA6063/$n$-Graphene Composites by Taguchi’s Grey Relational Analysis
E. Jenson Joseph, D. Muthukrishnan, G. R. Raghav, K. J. Nagarajan and R. Ashok KumarMETALLOFIZIKA I NOVEISHIE TEKHNOLOGII 46 (5) 453 (2024)
https://doi.org/10.15407/mfint.46.05.0453
Regulating the lattice strain in perovskite films to obtain efficient and stable perovskite solar cells
Qinqin Wang, Xiaoqing Jiang, Cheng Peng, Jiakang Zhang, Haokun Jiang, Hongkai Bu, Guangyue Yang, Hao Wang, Zhongmin Zhou and Xin GuoChemical Engineering Journal 481 148464 (2024)
https://doi.org/10.1016/j.cej.2023.148464
Mechanical behavior and microstructure of dissimilar aluminium/titanium rotary friction weld joints
Houssem Eddine Lakache, Abdelghani May, Riad Badji and Nathalie PoirotMetallurgical Research & Technology 121 (1) 112 (2024)
https://doi.org/10.1051/metal/2024001
Influence of tool geometry on mechanical and microstructural characteristics of friction stir welded cast alloys
B. S. Bindhushree, P. Sevvel, S. P. Shanmuganatan, D. Saravanabavan and M. MadhusudanPractical Metallography 61 (5) 292 (2024)
https://doi.org/10.1515/pm-2023-1055
The influence of tool shoulder size and plate position on the characteristics of friction stir welded different aluminum alloys
Ashok kumar R, Raghav G R, Nagarajan K J, Sathish Rengarajan and Mohan RJournal of the Chinese Institute of Engineers 47 (5) 589 (2024)
https://doi.org/10.1080/02533839.2024.2346500
Experimental investigation on characterization of friction stir processed AZ31-based composite
Chaman Jeet Singh, Baljinder Ram, Jashanpreet Singh, Chander Prakash, Prabhu Paramasivam and Rahul KumarScientific Reports 14 (1) (2024)
https://doi.org/10.1038/s41598-024-66379-1
Influence of Material Position and Tool Axis offset on the Stir Zone Material Flow and joint Integrity of Friction Stir Welded Dissimilar AA5083 and AA7050 Alloys
K Subrahmanian, V R Rajeev, V B Renjith and K K RamachandranMaterials Today Communications 109956 (2024)
https://doi.org/10.1016/j.mtcomm.2024.109956
Joint characteristics and process parameters optimization on friction stir welding of AA 2024-T6 and AA 5083-H111 aluminium alloys
Sakthivel Sundaram and Mohan KumarasamyJournal of the Serbian Chemical Society 89 (10) 1387 (2024)
https://doi.org/10.2298/JSC230920100S
Optimization of process parameters in friction stir welding of dissimilar aluminum alloys (AA6061–T6 and AA5052–H32)
Wondu Tesfaye Heramo and Henok Zewdu WorknehThe International Journal of Advanced Manufacturing Technology 129 (9-10) 4473 (2023)
https://doi.org/10.1007/s00170-023-12546-z
Effect of rotational speed and copper interlayer on the mechanical and fracture behaviour of friction stir spot welds of 5754 aluminium alloy
Ramzi Gassaa, Larbi Hemmouche, Riad Badji, et al.Metallurgical Research & Technology 120 (1) 118 (2023)
https://doi.org/10.1051/metal/2023014
Optimization of Wear Parameters on Friction Stir Welded Dissimilar Aluminium Joints
M. Madhusudan, S. P. Shanmuganatan and Shridhar KurseJournal of The Institution of Engineers (India): Series D 104 (2) 723 (2023)
https://doi.org/10.1007/s40033-022-00412-3
Investigation of mechanical, metallurgical and corrosion characteristics of friction stir welded dissimilar AA 5052-H32 and AA 6061-T6 joints
S. Balamurugan, K. Jayakumar and C. NandakumarJournal of the Chinese Institute of Engineers 46 (6) 601 (2023)
https://doi.org/10.1080/02533839.2023.2227875
Influence of process parameters and its effects on friction stir welding of dissimilar aluminium alloy and its composites – a review
K. N. Uday and G. RajamuruganJournal of Adhesion Science and Technology 37 (5) 767 (2023)
https://doi.org/10.1080/01694243.2022.2053348
Exfoliation corrosion susceptibility on friction stir welded aluminium 6061/Cr2O3 composite
K N Uday, K Senthilraj and G RajamuruganEngineering Research Express 4 (2) 025029 (2022)
https://doi.org/10.1088/2631-8695/ac7124
The Effect of Plug Rotation Speed on Micro-Structure of Nugget Zone of Friction Plug Repair Welding Joint for 6082 Aluminum Alloy
Defu Li and Xijing WangMaterials 14 (18) 5287 (2021)
https://doi.org/10.3390/ma14185287
Effect of tool axis offset and relative position of materials on the performance of dissimilar friction stir welded aluminium alloy joints–an overview
K Subrahmanian, K K Ramachandran and Rajeev VamadevanIOP Conference Series: Materials Science and Engineering 1114 (1) 012066 (2021)
https://doi.org/10.1088/1757-899X/1114/1/012066
Effects of tool pin profile on tensile and wear behaviour of friction stir welded AA6101-T6 and AA1350 alloys
R. Ashok kumar, R. Muneeswaran, M. Saravana Mohan, et al.Metallurgical Research & Technology 117 (5) 503 (2020)
https://doi.org/10.1051/metal/2020045