Effects of tool pin profile on tensile and wear behaviour of friction stir welded AA6101-T6 and AA1350 alloys
Metall. Res. Technol., 117 5 (2020) 503
Published online: 2020-09-08
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
DACNN based predicting tensile strength of friction stir welded aluminium alloy joints
T. Prakash, Abhinav, G. Gnanakumar and Elangovan MuniyandyInternational Journal of Machine Learning and Cybernetics 16 (5-6) 3997 (2025)
https://doi.org/10.1007/s13042-024-02494-9
Experimental investigation on characterization of friction stir processed AZ31-based composite
Chaman Jeet Singh, Baljinder Ram, Jashanpreet Singh, Chander Prakash, Prabhu Paramasivam and Rahul KumarScientific Reports 14 (1) (2024)
https://doi.org/10.1038/s41598-024-66379-1
The influence of tool shoulder size and plate position on the characteristics of friction stir welded different aluminum alloys
Ashok kumar R, Raghav G R, Nagarajan K J, Sathish Rengarajan and Mohan RJournal of the Chinese Institute of Engineers 47 (5) 589 (2024)
https://doi.org/10.1080/02533839.2024.2346500
Optimization of Wear Parameters on Friction Stir Welded Dissimilar Aluminium Joints
M. Madhusudan, S. P. Shanmuganatan and Shridhar KurseJournal of The Institution of Engineers (India): Series D 104 (2) 723 (2023)
https://doi.org/10.1007/s40033-022-00412-3
Investigation on Mechanical and Tribological Behavior of Double Pass Friction Stir Welded Aluminium Joints
M. Madhusudan, S. P. Shanmuganatan, Shridhar Kurse and Jacob JohnJournal of Bio- and Tribo-Corrosion 8 (2) (2022)
https://doi.org/10.1007/s40735-022-00654-4
Investigation on the effect of process parameters on mechanical and microstructural properties of AA8011 similar FSW weld joints
Gurijala Chakravarthi, Krishan Giridharan, Balasubramaniam Stalin, Sambandam Padmanabhan, Subramani Sekar, Nagaraj Nagaprasad, Leta Tesfaye Jule and Ramaswamy KrishnarajAdvances in Mechanical Engineering 14 (7) (2022)
https://doi.org/10.1177/16878132221112146
Microstructural Analysis and Mechanical Behaviour of Copper CDA 101/AISI-SAE 1010 Dissimilar Metal Welds Processed by Friction Stir Welding
K. Giridharan, P. Sevvel, B. Stalin, M. Ravichandran and P. SureshkumarMaterials Research 25 (2022)
https://doi.org/10.1590/1980-5373-mr-2021-0430