Correlation between hardness and abrasive wear of grinding balls
Metall. Res. Technol., 117 6 (2020) 608
Published online: 2020-09-25
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Comparative study of heat treatment routes for enhancing high-temperature wear resistance of EBM-processed Inconel 718
M.S. Karakas, A. Günen, T. Lindner, Y. Küçük, Ö. Kon, S. Joshi, G. Çam and T. LampkeMaterials Today Communications 49 113864 (2025)
https://doi.org/10.1016/j.mtcomm.2025.113864
Effect of Scanning Speed on the Microstructure and Properties of Co-Cu-Ti Coatings by Laser Cladding
Binglin Zhang, Yang Zhang, Hao Zhang, Guangliang Hu and Haicheng YuLubricants 13 (12) 543 (2025)
https://doi.org/10.3390/lubricants13120543
Abrasive Wear in Some High Fe-Cr-C Alloy in Cement Powder
Mohammed Khidhair JasimIgMin Research 3 (1) 011 (2025)
https://doi.org/10.61927/igmin278
The Effect of Ceria Particles Incorporation on Protective Properties of Oxide Layers Formed by PEO on Mg Alloy with LPSO-Phase
E. D. Borgardt, A. O. Polunina, M. R. Shafeev, A. V. Polunin and M. M. KrishtalRussian Journal of Non-Ferrous Metals 66 (5) 341 (2025)
https://doi.org/10.1134/S1067821225600851
Sand particle induced erosion in oil and gas screens: A review of influencing factors and wear dynamics
Azubuike Amadi, Mysara Mohyaldinn and Syahrir RidhaPowder Technology 436 119528 (2024)
https://doi.org/10.1016/j.powtec.2024.119528
Effect of Electrically Assisted Preheating on Microstructure and Properties of Laser-Cladded Co-Based Coating on CP-Ti Alloy Substrate
Xiao Li, Jiahui Peng, Fei Wang, Zengzhi Liu and Xinyi FengCoatings 13 (8) 1379 (2023)
https://doi.org/10.3390/coatings13081379
Effect of Cr Addition on Properties and Tribological Behavior at Elevated Temperature of Boride Layers Grown on Borosintered Powder Metallurgy Alloys
Ali Günen, Ömer Saltuk Bölükbaşı, Yasin Özgürlük, et al.Metals and Materials International 29 (3) 748 (2023)
https://doi.org/10.1007/s12540-022-01251-3