Friction stir processing of nanofiller assisted AISI 1010 steel-CDA 101 copper dissimilar welds: a strength factor approach
Metall. Res. Technol., 119 5 (2022) 505
Published online: 2022-08-10
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Microstructure and Mechanical Properties of TIG-Assisted Friction Stir Welded Joints of 3 mm-Thick Q235B Steel
Zhongyuan Feng, Ruichen Liu, Yuxin Li, Tao Liang and Li ZhouJournal of Materials Engineering and Performance (2026)
https://doi.org/10.1007/s11665-026-13316-0
Impact of Tool Plunge Depth, Tool Tilt Angle, and Tool Offset on Microstructure, Mechanical Properties, and Fracture Morphology of Friction Stir Welded Pure Copper Butt Joints
Puspendu Chandra Chandra, Arpan Kumar Mondal, Yadaiah Nirsanametla, Sohini Chowdhury and Barun HaldarJournal of Materials Engineering and Performance 34 (19) 22021 (2025)
https://doi.org/10.1007/s11665-025-10840-3
Modification and microalloying of the metal of welds on HSLA steels produced by fusion welding method (Review)
M.P. Reminnyi, V.A. Kostin and V.V. ZhukovThe Paton Welding Journal 2025 (1) 40 (2025)
https://doi.org/10.37434/tpwj2025.01.07
A STUDY ON IMPACT OF BIOSILICA SYNTHESIZED FROM WASTE MANIHOT ESCULENTA PEEL IN THE WELD QUALITY OF FRICTION STIR WELDED AA 6061-AZ31B Mg DISSIMILAR WELDS
G. CHAKRAVARTHI, R. RAMADOSS and K. GIRIDHARANSurface Review and Letters (2025)
https://doi.org/10.1142/S0218625X25501094
Thermomechanical analysis of induction-assisted friction stir welded Inconel 718 and SS321 by 3D-CEL approach
Rituraj Bhattacharjee, Prabhat Chand Yadav, Ahmed Hammad, Nobel Karmakar, Tanmoy Medhi and Pankaj BiswasInternational Journal of Modelling and Simulation 1 (2025)
https://doi.org/10.1080/02286203.2025.2484306
Evolution of Microstructure, Mechanical Properties, and Tribological Behavior of AA2024/B4C/Al2O3 Nanocomposites Fabricated by Multi-pass FSP
Md Saquib Bin Reyaz, Joginder Singh, Shallender Singh Bhati, Husain Mehdi and Subhash MishraJournal of Materials Engineering and Performance 34 (21) 25831 (2025)
https://doi.org/10.1007/s11665-025-11185-7
Microstructure-driven enhancements in tribological and corrosion properties of friction stir welded Al 2024-T3/304 stainless steel joints
Fayaz Ahmad Mir, Noor Zaman Khan, Arshad Noor Siddiquee, Saad Parvez, Turali Narayana, Mustufa Haider Abidi and Fahad AlasimTribology International 211 110853 (2025)
https://doi.org/10.1016/j.triboint.2025.110853
Achieving a high-strength dissimilar aluminium alloy 6061 and Polypropylene joint by Friction Stir Welding via varying tool rotational and traverse speed
Kethavath Kranthi Kumar, Korra Nagu, Mukuloth Srinivasnaik and Adepu KumarProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 239 (17) 6938 (2025)
https://doi.org/10.1177/09544062251343505
Microstructure characteristics and joining mechanisms of double-sided FSSWed ultra-high strength lightweight steel and mild steel
Xiaopei Wang, Yoshiaki Morisada, Wenhua Wu, Peihao Geng and Hidetoshi FujiiMaterials Today Communications 47 113080 (2025)
https://doi.org/10.1016/j.mtcomm.2025.113080
Enhancing mechanical attributes and tribological performance of titanium friction stir welded joints through nanoparticle reinforcement
K. Giridharan, A. Praveen Kumar, G. Chakravarthi, R M. Sakthi Sadhasivam, D. Manikandan and Krishnaraj RamaswamyScientific Reports 15 (1) (2025)
https://doi.org/10.1038/s41598-025-18558-x
Experimental investigation of tool geometries on Al/Cu dissimilar friction stir welded joint for varying rotational speed
Abhishek Mandal, Abhijit Banik, John Deb Barma and Gautam MajumdarWelding International 38 (12) 847 (2024)
https://doi.org/10.1080/09507116.2024.2436103
Exploring the effect of friction stir welding parameters on the strength of AA2024 and A356-T6 aluminum alloys
Ibrahim SabryJournal of Alloys and Metallurgical Systems 8 100124 (2024)
https://doi.org/10.1016/j.jalmes.2024.100124
Modification and micro alloying of the metal of welds on high-strength low-alloy steels produced by fusion welding method (Review)
M.Р. Reminnyi, V.A. Kostin and V.V. ZhukovSovremennaâ èlektrometallurgiâ 2024 (4) 41 (2024)
https://doi.org/10.37434/sem2024.04.06
MICROSTRUCTURAL ANALYSIS AND MECHANICAL PROPERTIES OF THREE-LAYERED STACK OF FSAM AA7075-CU ALLOYS
M. NALLUSAMY, M. SURIYAPRAKASH, K. KIRAN and M. JAYACHITRASurface Review and Letters 31 (01) (2024)
https://doi.org/10.1142/S0218625X24500069
Improvising of dissimilar friction stir weld strengths using biosilica nanoparticle: mechanical, fatigue and microstructure properties
T. V. B. Babu, M. Amala Justus Selvam and Natrayan L.Biomass Conversion and Biorefinery 14 (10) 11435 (2024)
https://doi.org/10.1007/s13399-022-03413-0
Friction stir welding of AA2024-T3 and SS304 alloys: microstructural analysis, microhardness evaluation, and tensile performance
Fayaz Ahmad Mir, Noor Zaman Khan, Zahid Mukhtar, Irfan Anjum Badruddin, Sarfaraz Kamangar and Lubaid NisarPhysica Scripta 99 (10) 105970 (2024)
https://doi.org/10.1088/1402-4896/ad75d5
Performance analysis of Al stainless steel joints fabricated by friction stir welding: Microstructure, mechanical, and tribology
Fayaz A Mir, Noor Z Khan, Khursheed A Sheikh, Irfan A Badruddin and Sarfaraz KamangarProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 238 (10) 1234 (2024)
https://doi.org/10.1177/13506501241246841
Investigation on effects of nano-reinforcement on the mechanical properties, fatigue, and microstructural analysis of dissimilar AA6061- Mg AZ31B weld joints
Chakravarthi Gurijala, Ramadoss Rajendran and Krishnan GiridharanPhysica Scripta 99 (11) 115928 (2024)
https://doi.org/10.1088/1402-4896/ad804e
Numerical Thermal Modeling and Analysis of Dry Sliding Contacts between Copper-Graphite and Bronze-Graphite
Youcef Mouadji, Rassim Younes, Salim Khima, Mohand Amokrane Bradai, Ali Bouchoucha and Haitham HadidiSAE International Journal of Materials and Manufacturing 18 (2) 179 (2024)
https://doi.org/10.4271/05-18-02-0013
Investigation on the mechanical properties and microstructural analysis of dissimilar friction stir welding of AA5154/AA7150
Sandeep Sarnobat, Indradeep Kumar, Kuldeep Kumar Saxena and Vinayak MalikJournal of Adhesion Science and Technology 38 (21) 4010 (2024)
https://doi.org/10.1080/01694243.2024.2362029
Investigation on the distribution and role of intermetallic aggregates in influencing the mechanical strength of the friction stir welded AZ91C Mg – AA6061 Al alloy joints
PJ Lokesh Kumar, P Sevvel, TG Loganathan and D PrakashMaterials Research Express 10 (2) 026516 (2023)
https://doi.org/10.1088/2053-1591/acbbbb
Impact of process parameters on transitions in the microstructural characteristics and mechanical attributes of Ti–6Al–4V alloy joints during FSW
D. Srinivasan, P. Sevvel and J . GunasekaranPractical Metallography 61 (1) 28 (2023)
https://doi.org/10.1515/pm-2023-1039