CT scan, EBSD and nanoindentation analysis of 3D-printed parts with post-process heat-treatment
Metall. Res. Technol., 121 1 (2024) 101
Published online: 2023-12-06
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Mitigating 3D printing defects via cyber-physical systems: a process for fabricating defect-free components
Babatunde Olamide Omiyale, Ikeoluwa Ireoluwa Ogedengbe, Jethro Odeyemi, Akinola Ogbeyemi, Funmilayo Olorunsogbon and Wenjun Chris ZhangThe International Journal of Advanced Manufacturing Technology (2025)
https://doi.org/10.1007/s00170-025-16100-x
Polyamide composites manufactured by selective laser sintering: effect of glass particle reinforcement on mechanical properties
Ilia Vindokurov, Rushan Khasyanov, Aleksandr Pankov, Elena Strungar and Mikhail TashkinovThe International Journal of Advanced Manufacturing Technology (2025)
https://doi.org/10.1007/s00170-025-15598-5
Mechanical properties optimization using response surface methodology (RSM) of a bio-mortar manufactured based on sisal fibers
Hocine Khelifa, Abderrezak Bezazi, Haithem Boumediri, Gilberto Garcia delPino, Salah Ellagoune, Paulo N. B. Reis and Fabrizio ScarpaThe International Journal of Advanced Manufacturing Technology 138 (5-6) 2335 (2025)
https://doi.org/10.1007/s00170-025-15664-y
CT-scan, SEM, EDX, flowability, rheology, permeability and tensile test analysis of recycled Ti6Al4V powders for 3D printing
Ming-Lang Tseng, Emad A.A. Ismail, Fuad A. Awwad and Nima E. GorjiMetallurgical Research & Technology 122 (4) 404 (2025)
https://doi.org/10.1051/metal/2025032
Comparative analysis of single-objective and multi-objective optimization of mechanical properties in annealed and non-annealed 3D-printed parts: impact of strain rates and raster angles
Rania Ben Amor and Slim SouissiThe International Journal of Advanced Manufacturing Technology 138 (5-6) 2019 (2025)
https://doi.org/10.1007/s00170-025-15669-7
Low-temperature impact toughness and embrittlement mechanism of a 460 MPa-grade steel used in a supporting equipment of a nuclear reactor pressure vessel
Tianyu Gao, Haiyang Hu, Yu Hu, Yong Wang and Diandong SunMetallurgical Research & Technology 122 (4) 410 (2025)
https://doi.org/10.1051/metal/2025036
Assessment of current capabilities for cost effective digital deposition of cold spray additive structures: a review
Abdoolah Badaloo, Muhammad Faizan-Ur-Rab, Saden H. Zahiri, Syed. H. Masood and Suresh PalanisamyThe International Journal of Advanced Manufacturing Technology 138 (9-10) 3879 (2025)
https://doi.org/10.1007/s00170-025-15676-8
Design and fabrication of resistive sensor using additive manufacturing techniques for robotic application
Donya MostaghniYazdi, Muhammad Usman Khalid, Mattia Frascio and Matteo ZoppiThe International Journal of Advanced Manufacturing Technology 139 (3-4) 1711 (2025)
https://doi.org/10.1007/s00170-025-15977-y
Generalizable classification methodology for quantification of atomized feedstock powder by 3D X-ray tomography data and machine learning
Daniel R. Sinclair, Eshan Ganju, Hamidreza Torbati-Sarraf and Nikhilesh ChawlaPowder Technology 451 120432 (2025)
https://doi.org/10.1016/j.powtec.2024.120432
Development of a novel 3D construction printer for consistent buildability of novel geopolymer mortar and its challenges
Md. Hazrat Ali, Anuar Abilgaziyev, Bakbergen Temirzakuly and Syuhei KurokawaThe International Journal of Advanced Manufacturing Technology 136 (3-4) 1791 (2025)
https://doi.org/10.1007/s00170-024-14865-1
Probabilistic optimization of grinding processes in manufacturing industry
Hamza Ferhat, Gao Liang and Ferhat DjeddouThe International Journal of Advanced Manufacturing Technology 136 (10) 4525 (2025)
https://doi.org/10.1007/s00170-025-15092-y
Innovative multiscale analysis of environmental effects on fracture properties in amorphous alumina ceramics
Junhao Chang, Zengtao Chen and James D. HoganEngineering Fracture Mechanics 315 110699 (2025)
https://doi.org/10.1016/j.engfracmech.2024.110699
Modification of Nb powder for laser powder bed fusion additive manufacturing: Experimental and theoretical analysis
Hancong Chen, Jincheng Tang, Zhaozhen Huang, Weipeng Li, Mingxing Zhang and Ming YanJournal of Alloys and Compounds 1018 179096 (2025)
https://doi.org/10.1016/j.jallcom.2025.179096
Study on the penetration protection of a fiber-reinforced composite structure with CNTs/GFP clip STF/3DKevlar
Yangshuo Liu, Xingyong Gao, Ping Cui, Mingjiang Han, Ruosi Yan, Huanan Wei, Anqi Zhai and Hao LuoOpen Physics 23 (1) (2025)
https://doi.org/10.1515/phys-2024-0108
Manufacturing by resin infusion and characterization of hybrid carbon/glass fiber–reinforced plastic from recycled carbon fiber
Elisa Pizzi and Federica TrovalusciThe International Journal of Advanced Manufacturing Technology 137 (1-2) 619 (2025)
https://doi.org/10.1007/s00170-025-15233-3
Additive manufacturing of functional gradient thermoplastic composite using fused deposition modelling and coextrusion continuous fibres
Anton Sotov, Anna Abdrakhmanova, Alexander Zaytsev and Anatoliy PopovichThe International Journal of Advanced Manufacturing Technology 137 (7-8) 3587 (2025)
https://doi.org/10.1007/s00170-025-15376-3
Microscopic insights into microstructural and mechanical responses of a Zr-based metallic glass induced by low-energy nanosecond laser shock
Jinhong Lei, Hong Huang, Lanping Huang, Xiaoming Yuan, Han Huang, Tao Xu, Hongyi Zhang and Song LiJournal of Alloys and Compounds 1026 180278 (2025)
https://doi.org/10.1016/j.jallcom.2025.180278
Optimizing 3D printing process parameters to improve surface quality and investigate the microstructural characteristics of PLA material
Fikadu Mequant Kidie, Tesfa Guadie Ayaliew and Samuel Tesfaye MekononeThe International Journal of Advanced Manufacturing Technology 138 (2) 457 (2025)
https://doi.org/10.1007/s00170-025-15543-6
Wire arc additive manufacturing of a high-strength low-alloy steel part: environmental impacts, costs, and mechanical properties
Samruddha Kokare, Jiajia Shen, Pedro P. Fonseca, João G. Lopes, Carla M. Machado, Telmo G. Santos, João P. Oliveira and Radu GodinaThe International Journal of Advanced Manufacturing Technology 134 (1-2) 453 (2024)
https://doi.org/10.1007/s00170-024-14144-z
Study on dynamic and static tensile and puncture-resistant mechanical properties of impregnated STF multi-dimensional structure Kevlar fiber reinforced composites
Yangshuo Liu, Xingyong Gao, Mingjiang Han, Huanan Wei and Hao LuoOpen Physics 22 (1) (2024)
https://doi.org/10.1515/phys-2024-0065
Influence of hybrid additive manufacturing processes on the microstructure and mechanical properties of maraging steel 1.2709 components with post-processing heat treatments
M. Kumaran and S. RaviMaterials Letters 377 137427 (2024)
https://doi.org/10.1016/j.matlet.2024.137427
Paradigm shift for predictive maintenance and condition monitoring from Industry 4.0 to Industry 5.0: A systematic review, challenges and case study
Aitzaz Ahmed Murtaza, Amina Saher, Muhammad Hamza Zafar, Syed Kumayl Raza Moosavi, Muhammad Faisal Aftab and Filippo SanfilippoResults in Engineering 24 102935 (2024)
https://doi.org/10.1016/j.rineng.2024.102935
Concurrent multiscale topology optimization for size-dependent structures incorporating multiple-phase materials
Xinguang Zhao and Ning GanResults in Engineering 23 102491 (2024)
https://doi.org/10.1016/j.rineng.2024.102491
Manufacturing of non-grain-oriented electrical steels: review
Rasoul Karami, David Butler and Saeed TamimiThe International Journal of Advanced Manufacturing Technology 133 (3-4) 1083 (2024)
https://doi.org/10.1007/s00170-024-13837-9
Alendronate releasing silk fibroin 3D bioprinted scaffolds for application in bone tissue engineering: Effects of alginate concentration on printability, mechanical properties and stability
Fatemeh Norouzi, Fatemeh Bagheri and Sameereh Hashemi-NajafabadiResults in Engineering 22 102186 (2024)
https://doi.org/10.1016/j.rineng.2024.102186