Physical and mechanical properties of iron-aluminium-(Mn, Si) lightweight steels
Rev. Met. Paris, 97 10 (2000) 1245-1253
Published online: 2002-10-25
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Overview of Lightweight Ferrous Materials: Strategies and Promises
Radhakanta Rana, Chris Lahaye and Ranjit Kumar RayJOM 66 (9) 1734 (2014)
https://doi.org/10.1007/s11837-014-1126-5
Effect of Second Phase on the Deformation and Fracture Behavior of Multiphase Low-Density Steels
Seong-Jun Park, Yoon-Uk Heo, Yong Hoon Choi, et al.JOM 66 (9) 1837 (2014)
https://doi.org/10.1007/s11837-014-1060-6
Coupling of Crystal Plasticity Finite Element and Phase Field Methods for the Prediction of SRX Kinetics after Hot Working
Onur Güvenç, Markus Bambach and Gerhard Hirtsteel research international 85 (6) 999 (2014)
https://doi.org/10.1002/srin.201300191
Propiedades mecánicas a tracción y mecanismos de endurecimiento de un acero TWIP a altas velocidades de deformación: relación de Hall-Petch
Fernando De las Cuevas, Alessandro Ferraiuolo, L. Pentti Karjalainen and Javier Gil SevillanoRevista de Metalurgia 50 (4) e031 (2014)
https://doi.org/10.3989/revmetalm.031
Low-Density Steels: The Effect of Al Addition on Microstructure and Properties
Sudipta Pramanik and Satyam SuwasJOM 66 (9) 1868 (2014)
https://doi.org/10.1007/s11837-014-1129-2
Comprehensive Materials Processing
L.A. Dobrzański, W. Borek and J. MazurkiewiczComprehensive Materials Processing 199 (2014)
https://doi.org/10.1016/B978-0-08-096532-1.00216-8
Fe–Al–Mn–C lightweight structural alloys: a review on the microstructures and mechanical properties
Hansoo Kim, Dong-Woo Suh and Nack J KimScience and Technology of Advanced Materials 14 (1) 014205 (2013)
https://doi.org/10.1088/1468-6996/14/1/014205
Influence of Al content and precipitation state on the mechanical behavior of austenitic high-Mn low-density steels
I. Gutierrez-Urrutia and D. RaabeScripta Materialia 68 (6) 343 (2013)
https://doi.org/10.1016/j.scriptamat.2012.08.038
Leichtbau in der Fahrzeugtechnik
Hajo Dieringa, Klaus Drechsler, Thomas Evertz, et al.Leichtbau in der Fahrzeugtechnik 199 (2013)
https://doi.org/10.1007/978-3-8348-2110-2_6
Hot deformation activation energy (QHW) of austenitic Fe–22Mn–1.5Al–1.5Si–0.4C TWIP steels microalloyed with Nb, V, and Ti
F. Reyes-Calderón, I. Mejía and J.M. CabreraMaterials Science and Engineering: A 562 46 (2013)
https://doi.org/10.1016/j.msea.2012.10.091
Low-density low-carbon Fe–Al ferritic steels
R. Rana, C. Liu and R.K. RayScripta Materialia 68 (6) 354 (2013)
https://doi.org/10.1016/j.scriptamat.2012.10.004
Dynamic recrystallization mechanisms of an Fe–8% Al low density steel under hot rolling conditions
C. Castan, F. Montheillet and A. PerladeScripta Materialia 68 (6) 360 (2013)
https://doi.org/10.1016/j.scriptamat.2012.07.037
Thermoelectric power in low-density interstitial-free iron-aluminium alloys
Radhakanta Rana and Cheng LiuPhilosophical Magazine Letters 93 (9) 502 (2013)
https://doi.org/10.1080/09500839.2013.813981
Interactions between deformation-induced defects and carbides in a vanadium-containing TWIP steel
Hung-Wei Yen, Mingxin Huang, C.P. Scott and Jer-Ren YangScripta Materialia 66 (12) 1018 (2012)
https://doi.org/10.1016/j.scriptamat.2012.02.002
Effect of Melting Process on the Microstructure and Mechanical Properties of Fe–7 wt% Al Alloy
Shivkumar Khaple and R. G. BaligidadTransactions of the Indian Institute of Metals 65 (1) 57 (2012)
https://doi.org/10.1007/s12666-011-0105-6
Mesoscopic Simulations of Recrystallization and Grain Growth in a Fe-0.374%C-21.64%Mn Alloy
L.A. Barrales-Mora, Ya Ping Lü, Dmitri A. Molodov and Günter GottsteinMaterials Science Forum 715-716 849 (2012)
https://doi.org/10.4028/www.scientific.net/MSF.715-716.849
Effect of V on Hot Deformation Characteristics of TWIP Steels
Francisco Reyes, Jessica Calvo, José María Cabrera and Ignacio Mejíasteel research international 83 (4) 334 (2012)
https://doi.org/10.1002/srin.201100320
Experimental Determination and Simulation of Annealing Textures in Cold Rolled TWIP and TRIP Steels
L.A. Barrales‐Mora, Y. Lü and D.A. Molodovsteel research international 82 (2) 119 (2011)
https://doi.org/10.1002/srin.201000261
Fundamentals for Better Use of Stainless Steels -Development History, Characteristics and Resistance to Corrosion-
Osamu FURUKIMI, Toshiyasu ETO and Masatoshi ITOJournal of the Society of Materials Science, Japan 60 (8) 771 (2011)
https://doi.org/10.2472/jsms.60.771
Effects of Different Manganese Content on Microstructures and Properties of TWIP Steel
Li Hui Wang, Di Tang, Hai Tao Jiang, Ji Bin Liu and Yu ChenAdvanced Materials Research 399-401 254 (2011)
https://doi.org/10.4028/www.scientific.net/AMR.399-401.254
Precipitation strengthening in high manganese austenitic TWIP steels
Colin Scott, Blandine Remy, Jean-Louis Collet, et al.International Journal of Materials Research 102 (5) 538 (2011)
https://doi.org/10.3139/146.110508
The ternary iron aluminum carbides
J.A. Jiménez and G. FrommeyerJournal of Alloys and Compounds 509 (6) 2729 (2011)
https://doi.org/10.1016/j.jallcom.2010.12.017
Recristallisation dynamique d’alliages à basse densité fer-aluminium
C. Castan, F. Montheillet and A. PerladeRevue de Métallurgie 108 (3) 141 (2011)
https://doi.org/10.1051/metal/2011050
Influence of the α–α′ phase separation on the tensile properties of Fe-base ODS PM 2000 alloy
C. Capdevila, M.K. Miller, I. Toda and J. ChaoMaterials Science and Engineering: A 527 (29-30) 7931 (2010)
https://doi.org/10.1016/j.msea.2010.08.083
The influence of hot-working conditions on a structure of high-manganese steel
A. GRAJCAR, M. OPIELA and G. FOJT-DYMARAArchives of Civil and Mechanical Engineering 9 (3) 49 (2009)
https://doi.org/10.1016/S1644-9665(12)60217-9
Thermodynamic assessment of the Fe–Al–Zr phase diagram
Vincent Rigaud, Bo Sundman, Dominique Daloz and Gérard LesoultCalphad 33 (3) 442 (2009)
https://doi.org/10.1016/j.calphad.2009.05.003
Effect of chromium ternary additions on the ordering behaviour in Fe–28at.% Al alloy
D. Hamana, L. Amiour and M. BouchearMaterials Chemistry and Physics 112 (3) 816 (2008)
https://doi.org/10.1016/j.matchemphys.2008.06.045
Thin coatings with graded elastic properties
K L DahmProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 222 (3) 249 (2008)
https://doi.org/10.1243/13506501JET376
Al as solid solution hardener in steels
B. Mintz, W. D. Gunawardana and H. SuMaterials Science and Technology 24 (5) 596 (2008)
https://doi.org/10.1179/174328407X248460
Phases Equilibrium Study in Quaternary Iron-rich Fe-Al-Mn-C Alloys
Vincent Rigaud, Dominique Daloz, Josée Drillet, et al.ISIJ International 47 (6) 898 (2007)
https://doi.org/10.2355/isijinternational.47.898
Evolution of the texture of spray-formed Fe–6.5wt.% Si–1.0wt.% Al alloy during warm-rolling
R. Machado, A.H. Kasama, A.M. Jorge, et al.Materials Science and Engineering: A 449-451 854 (2007)
https://doi.org/10.1016/j.msea.2006.03.132
Iron Aluminium Alloys with Strengthening Carbides and Intermetallic Phases for High-Temperature Applications
André Schneider and Gerhard Sauthoffsteel research international 75 (1) 55 (2004)
https://doi.org/10.1002/srin.200405927
Plastic deformation of Fe-Al polycrystals strengthened with Zr-containing Laves phases
A Wasilkowska, M Bartsch, F Stein, et al.Materials Science and Engineering: A 381 (1-2) 1 (2004)
https://doi.org/10.1016/j.msea.2004.04.039
Deformation behaviour of iron-rich iron-aluminum alloys at low temperatures
J. Herrmann, G. Inden and G. SauthoffActa Materialia 51 (10) 2847 (2003)
https://doi.org/10.1016/S1359-6454(03)00089-2
Light-weight steels based on iron-aluminium - influence of micro alloying elements (B, Ti, Nb) on microstructures, textures and mechanical properties
Udo Brüx, Georg Frommeyer and José JimenezSteel Research 73 (12) 543 (2002)
https://doi.org/10.1002/srin.200200026