EDP Sciences logo
Subscriber Authentication Point
Sciengine logo
Search
Menu
All issues Rev. Met. Paris, 97 10 (2000) 1245-1253 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Duplex microstructure enhanced mechanical property and underlined mechanism in Fe35MnxAl0.1C low-density steel

Qingfeng Kang, Zexi Zhang, Hui Wang, Haifeng Xu, Cunyu Wang, Zhengdong Liu and Wenquan Cao
Materials Science and Engineering: A 953 149792 (2026)
https://doi.org/10.1016/j.msea.2026.149792

Recent Advances in κ-Carbide Precipitation Behavior and Its Influence on Mechanical Properties in Austenite-Based Fe-Mn-Al-C Lightweight Steels

Yanjie Mou, Kai Lei, Jiahao Li, Xiaofei Guo, Jianwen Fan, Chundong Hu and Han Dong
Materials 19 (4) 727 (2026)
https://doi.org/10.3390/ma19040727

Impact behavior of automotive grade medium manganese steel: Reviews on current progress and challenges

Sudipta Mohapatra, Arnab Sarkar, Suman Kumar, Renuprava Dalai and Min-Suk Oh
Materials Science and Technology (2026)
https://doi.org/10.1177/02670836251412337

A Comprehensive Exploration of the Relationship between Microstructure Optimization and Strength Enhancement in Low-Density 5Al-5Mn Steel

Mengjun Chen, Tingping Hou, Shi Cheng, Feng Hu, Tao Yu, Xianming Pan, Yuanyuan Li and Kaiming Wu
Acta Metallurgica Sinica (English Letters) 38 (7) 1219 (2025)
https://doi.org/10.1007/s40195-025-01848-8

Research on the microstructure and corrosion behaviour of Fe–Mn–Al–C low-density steel alloyed with Cu

Honglei Wang, Xinyi Liu, Chunguang Shen, Yuqi Hao, Xingcheng Qiu, Jin Li, Rui Wang, Min Hu, Xu Wang and Jacob C. Huang
Journal of Materials Research and Technology 38 1026 (2025)
https://doi.org/10.1016/j.jmrt.2025.07.290

Design and Development of a Lightweight Steel Through Computational Thermodynamics Approach and Experiments

Shetti Swamy, Appala Naidu Gandi and Sk Md Hasan
Metallurgical and Materials Transactions A 56 (9) 3748 (2025)
https://doi.org/10.1007/s11661-025-07864-8

Development of Low-Density Steel Nanocomposite Using Mechanical Alloying Followed by Spark Plasma Sintering

Anil Kumar and Raj Bahadur Singh
Journal of Materials Engineering and Performance 34 (10) 8904 (2025)
https://doi.org/10.1007/s11665-025-10662-3

Strain rate effects on mechanical properties, microstructural evolution, and deformation mechanisms of high manganese steels

Dong Liu, Dapeng Yang, Yong Hou, Yunjie Li, Guodong Wang and Hongliang Yi
Journal of Materials Science & Technology 237 219 (2025)
https://doi.org/10.1016/j.jmst.2025.03.026

Influence of scanning speed and hatch distance on defects, microstructure, and mechanical performance of Fe–Mn–Al–Ni–C low-density steel fabricated via directed energy deposition

Yuanjiu Huang, Jin-young Kim, Han-Soo Kim and Kee-Ahn Lee
Powder Metallurgy 68 (3) 271 (2025)
https://doi.org/10.1177/00325899251339990

Recent advances in medium-manganese steel: a review of key findings, challenges, and future perspectives

Sudipta Mohapatra, Bangmaya Satpathy, Arnab Sarkar, Suman Kumar, Satyabrata Aich and Min-Suk Oh
Journal of Materials Science 60 (23) 9447 (2025)
https://doi.org/10.1007/s10853-025-11010-5

Welding investigation of a wrought FeMnAl steel for armor application

Tao Dai, Zhili Feng, Douglas Kyle, Wei Zhang, Chad Parish, Katherine Sebeck, Demetrios Tzelepis, Katherine Vieau and Matt Rogers
Welding in the World 69 (12) 3707 (2025)
https://doi.org/10.1007/s40194-025-02078-3

Effect of Al Content on Microstructure, Deformation Mechanisms, and Strength–Ductility in Lightweight Fe-24Mn-xAl-0.85C Steels

Haowen Peng, Yan Wang, Shifeng Liu, Changjun Wang and Chunxu Wang
Journal of Materials Engineering and Performance (2025)
https://doi.org/10.1007/s11665-025-12658-5

Elucidating the role of ordered phases and carbides in the mechanical performance of friction stir welded high aluminum low-density ferrite steels

Junqi Chen, Takuya Miura, Kohsaku Ushioda, Abhishek Sharma and Hidetoshi Fujii
Journal of Materials Processing Technology 343 118959 (2025)
https://doi.org/10.1016/j.jmatprotec.2025.118959

Fabrication, microstructure, and mechanical properties of Fe-16Mn-10Al-5Ni-0.86C (wt.%) lightweight steel manufactured by directed energy deposition

Yuanjiu Huang, Amol B. Kale, Tae-Hoon Kang, Han-Soo Kim and Kee-Ahn Lee
Materials Science and Engineering: A 944 148901 (2025)
https://doi.org/10.1016/j.msea.2025.148901

The influence of processing routes on the microstructure and mechanical properties of Fe-Mn-Al-C steels with Ni additions

J.S. Rodríguez, J.F. Duran, O.A. Zambrano and A. Bedolla-Jacuinde
Materials Science and Engineering: A 944 148932 (2025)
https://doi.org/10.1016/j.msea.2025.148932

Strain Rate-Dependent Tensile and Fracture Properties of Low-Carbon Ferritic Low-Density Steels

Vinit Kumar Singh, Radhakanta Rana, Shiv Brat Singh and Amrita Kundu
Metallurgical and Materials Transactions A 55 (8) 2990 (2024)
https://doi.org/10.1007/s11661-024-07453-1

A Feasible Thermomechanical Process of a Duplex-Phase Fe–Mn–Al–C Steel for Significantly Increasing Ductility Without Loss of Strength

Y. Wang, P. Chen, R. Chen and X. W. Li
Metallurgical and Materials Transactions A 55 (5) 1539 (2024)
https://doi.org/10.1007/s11661-024-07342-7

Simulation of Solidification, Microsegregation, and Heat Treatment of Cr-Based Fe–xMn–7.5Al–1.0C Lightweight Steels

Swamy Shetti, Appala Naidu Gandi and Sk Md Hasan
Transactions of the Indian Institute of Metals 77 (10) 3107 (2024)
https://doi.org/10.1007/s12666-023-03231-6

High entropy Fe–Mn–Ni–Co–Al–C alloys from an industrial steel

Victor O. Semin, Jing Jiang, Erzhena N. Zanaeva, Daixiu Wei, Rui Yamada, Takeshi Wada, Hidemi Kato and Dmitri V. Louzguine-Luzgin
Materials Science and Technology 40 (4) 275 (2024)
https://doi.org/10.1177/02670836231214399

A Review of High-Temperature Toughness Improvement Strategies for Medium Entropy Alloys

Lei Wang, Haotian Zhou, Yazhou Chen, Yongfei Gao, Qingming Gan, Zhi Li, Yuntao Xi, Keren Zhang, Shanna Xu, Haitao Liu, Lei Wen, Xinke Xiao and Jiangtao Ji
Journal of Materials Engineering and Performance 33 (5) 2051 (2024)
https://doi.org/10.1007/s11665-023-08935-w

M23C6-assisted formation mechanism of grain boundary cellular structure and its role on the brittle fracture in an austenitic Fe-Mn-Al-C lightweight alloy

Dongwon Lee, Gun-Young Yoon, Seong-Jun Park, Jae Sang Lee and Yoon-Uk Heo
Journal of Alloys and Compounds 972 172865 (2024)
https://doi.org/10.1016/j.jallcom.2023.172865

Formation of Heterogeneous Nucleation of B2-NiAl in Hot Rolled Fe-Mn-Al-C Plate: A Novel Composition and Processing Route for Lightweight High Strength Steel Containing Nickel

Michael Piston, Laura Bartlett, Krista R. Limmer, Daniel M. Field and Billy C. Hornbuckle
Metals 14 (12) 1342 (2024)
https://doi.org/10.3390/met14121342

Metallographic, structural and mechanical characterization of welded plates of an austenitic Fe-31Mn-8Al-1.9C low-density steel

C. E. Coronado-Alba, I. Mejía and J. M. Cabrera
MRS Advances 9 (23) 1828 (2024)
https://doi.org/10.1557/s43580-024-00978-y

In-situ synthesis and characterization of lightweight steel matrix composites reinforced by TiB2

André L. Vidilli, Lucas B. Otani, Guilherme Y. Koga, Vicente Amigó and Claudemiro Bolfarini
Journal of Alloys and Metallurgical Systems 7 100093 (2024)
https://doi.org/10.1016/j.jalmes.2024.100093

Enhancement of Elastic Modulus by TiC Reinforcement in Low-Density Steel

R. Pavan Kumar, N. C. Santhi Srinivas and R. Manna
Transactions of the Indian Institute of Metals 77 (11) 4041 (2024)
https://doi.org/10.1007/s12666-024-03452-3

Deciphering the composition-microstructure correlation in low-density FeMnAlC steels with machine learning

Peng Tiexu, Yu Haoyang, Huang Jiaxin, Fang wei, Li Cong, Yao Zitong, Zhang Xin, Feng Jianhang, Ji Puguang, Xia Chaoqun, Yu Hui and Yin Fuxing
Computational Materials Science 244 113202 (2024)
https://doi.org/10.1016/j.commatsci.2024.113202

Texture Analyses and Mechanical Behavior of a High-Mn Steel Subjected to Different Pass Number of Simple Shear

Marcos Natan da Silva Lima, Samuel Filgueiras Rodrigues, Majid Al-Maharbi, Laia Ortiz-Membrado, Maria Veronica Goncalves Rodrigues, Jessica Calvo Muñoz, Emilio Jiménez-Piqué, Gedeon Silva Reis, José María Cabrera Marrero and Hamilton Ferreira Gomes de Abreu
Metals and Materials International 30 (8) 2296 (2024)
https://doi.org/10.1007/s12540-024-01643-7

Research Status of High-Manganese High-Aluminum Steel and Key Points of Continuous Casting

Guo-Xing Qiu, Jia-Ning Li, Kui Chen, Guang Xu, Yong-Kun Yang and Xiao-Ming Li
JOM 76 (12) 7011 (2024)
https://doi.org/10.1007/s11837-024-06651-x

A review on the current status of Fe–Al based ferritic lightweight steel

Shivkumar Khaple, Brahma Raju Golla and V.V. Satya Prasad
Defence Technology 26 1 (2023)
https://doi.org/10.1016/j.dt.2022.11.019

Research status and development prospect of Fe–Mn–C–Al system low-density steels

Shao-bin Bai, Yong-an Chen, Xin Liu, Hui-hu Lu, Pei-kang Bai, Da-zhao Li, Zhi-quan Huang and Jing-yang Li
Journal of Materials Research and Technology 25 1537 (2023)
https://doi.org/10.1016/j.jmrt.2023.06.037

Investigations of the quality of metal of high-manganese steel alloyed by aluminium and chromium after electroslag remelting

V.A. Zaitsev, Yu.V. Kostetskyi, G.O. Polishko, V.A. Kostin, V.P. Petrenko and E.O. Pedchenko
The Paton Welding Journal 2023 (12) 39 (2023)
https://doi.org/10.37434/tpwj2023.12.05

Properties of Fe–Mn–Al alloys with different Mn contents using density functional theory

Xiang Luo, Jing Feng, Ya‐Hui Liu, Ming‐Yu Hu, Xiao‐Yu Chong and Ye‐Hua Jiang
Rare Metals 42 (4) 1387 (2023)
https://doi.org/10.1007/s12598-018-1074-2

A comparative study on passive films of Fe–11Cr stainless steel and Fe–20Mn–11.5Al–1.4C–5Cr lightweight steel

Heon-Young Ha, Kyeong-Won Kim, Seong-Jun Park, Chang-Hoon Lee, Tae-Ho Lee, Hyun-Uk Hong and Joonoh Moon
Journal of Materials Research and Technology 26 6135 (2023)
https://doi.org/10.1016/j.jmrt.2023.09.018

The η-Al5Fe2 phase in the Al–Fe system: The issue with the sublattice model

M. Ilatovskaia, H. Becker, O. Fabrichnaya and A. Leineweber
Journal of Alloys and Compounds 936 168361 (2023)
https://doi.org/10.1016/j.jallcom.2022.168361

Effect of Cr addition and heat treatment on the physical properties of Fe-Al melt-spun ribbons

Imad Messai, Djamel Hamana, Zehira Belamri and Volodymyr Chernenko
Metallurgical Research & Technology 120 (1) 106 (2023)
https://doi.org/10.1051/metal/2022097

Critical role of κ-carbides in the multi-stage work hardening process of a lightweight austenitic steel

P. Chen, Q.C. Zhang, F. Zhang, J.H. Du, F. Shi and X.W. Li
Materials Characterization 200 112853 (2023)
https://doi.org/10.1016/j.matchar.2023.112853

Simultaneous improvement of corrosion and wear resistance of Fe–Mn–Al–C lightweight steels: The role of Cr/Mo

Yihao Tang, Bo Li, Heyang Shi, Yuxing Guo, Shuzhi Zhang, Junsong Zhang, Xinyu Zhang and Riping Liu
Materials Characterization 205 113274 (2023)
https://doi.org/10.1016/j.matchar.2023.113274

Investigations of the quality of metal of high-manganese steel alloyed by aluminium and chromium after electroslag remelting

V.A. Zaitsev, Yu.V. Kostetskyi, G.O. Polishko, V.A. Kostin, V.P. Petrenko and E.O. Pedchenko
Sovremennaâ èlektrometallurgiâ 2023 (4) 17 (2023)
https://doi.org/10.37434/sem2023.04.03

Achieving excellent strength and ductility synergy by δ phase strengthening in low-density high-manganese steel

Gang Niu, Donghao Jin, Na Gong and R.D.K. Misra
Materials Technology 38 (1) (2023)
https://doi.org/10.1080/10667857.2023.2283991

In-situ alloyed ultrahigh strength steels via additive manufacturing

Xiaopei Wang, Weiting Li, Yingjie Yao, Luyao Fan, Jinhua Wang, Weiyi Wang, Pengyu Wen, Zhigang Yang and Hao Chen
Additive Manufacturing 77 103825 (2023)
https://doi.org/10.1016/j.addma.2023.103825

Mechanical Properties of a CrCoNi Medium Entropy Alloy in a Gradient Twin Structure

Lei Wang, Yueming Feng, Zhigao Mao, et al.
Journal of Materials Engineering and Performance 31 (9) 7402 (2022)
https://doi.org/10.1007/s11665-022-06794-5

Microstructure and Continuous Cooling Transformation of an Fe-7.1Al-0.7Mn-0.4C-0.3Nb Alloy

Mônica Aline Magalhães Gurgel, Eustáquio de Souza Baêta Júnior, Rodolfo da Silva Teixeira, Gabriel Onofre do Nascimento, Suzane Sant’Ana Oliveira, Duílio Norberto Ferronatto Leite, Luciano Pessanha Moreira, Luiz Paulo Brandao and Andersan dos Santos Paula
Metals 12 (8) 1305 (2022)
https://doi.org/10.3390/met12081305

Microstructural Constituents and Mechanical Properties of Low-Density Fe-Cr-Ni-Mn-Al-C Stainless Steels

Steffen Scherbring, Guanghui Chen, Bastian Veltel, Gert Bartzsch, Julia Richter, Malte Vollmer, Malte Blankenburg, Saikat Shyamal, Olena Volkova, Thomas Niendorf, Ulrich Lienert, Puspendu Sahu and Javad Mola
Materials 15 (15) 5121 (2022)
https://doi.org/10.3390/ma15155121

A new hot-rolled lightweight steel with ultra-high strength and good ductility designed by dislocation character and transformation strain

Chenghao Song, Haoliang Wang, Zhenzhong Sun, Juping Xu, Huaican Chen and Wen Yin
Scripta Materialia 212 114583 (2022)
https://doi.org/10.1016/j.scriptamat.2022.114583

Recent Advances on the Corrosion Resistance of Low-Density Steel: A Review

Chao Liu, Yilun Li, Xuequn Cheng and Xiaogang Li
Acta Metallurgica Sinica (English Letters) 35 (7) 1055 (2022)
https://doi.org/10.1007/s40195-021-01369-0

Tensile deformation-induced twinning in an austenitic low density steel over a wide range of temperature

Hui Wang, Jiangxiong Liang, Zhiyue Shi, et al.
IOP Conference Series: Materials Science and Engineering 1249 (1) 012011 (2022)
https://doi.org/10.1088/1757-899X/1249/1/012011

A feasible route to produce 1.1 GPa ferritic-based low-Mn lightweight steels with ductility of 47%

Kwang Kyu Ko, Hyo Ju Bae, Eun Hye Park, Hyeon-Uk Jeong, Hyoung Seok Park, Jae Seok Jeong, Jung Gi Kim, Hyokyung Sung, Nokeun Park and Jae Bok Seol
Journal of Materials Science & Technology 117 225 (2022)
https://doi.org/10.1016/j.jmst.2021.11.052

Caracterização microestrutural de uma liga Fe-7,1Al-0,7Mn-0,4C-0,3Nb do sistema Fe-Mn-Al-C

Mônica Aline Magalhães Gurgel, Eustáquio de Souza Baêta Júnior, Rodolfo da Silva Teixeira, et al.
Matéria (Rio de Janeiro) 27 (2) (2022)
https://doi.org/10.1590/1517-7076-rmat-2021-46400

Effect of Solution Treatment Temperature on Microstructure and Properties of Fe-0.72Mn-3.7Al-0.53C Low-Density Cast Steel

Nan Song, Weimin Zhao, Lishan Dong and Xinshan Zhou
Metals 12 (8) 1290 (2022)
https://doi.org/10.3390/met12081290

Effect of Aluminum Content on the Dynamic Recrystallization of Fe18MnxAl0.74C Steels During Hot-Forging Treatments

J. S. Rodriguez, J. F. Duran, Y. Aguilar, et al.
Metallurgical and Materials Transactions A 53 (8) 2961 (2022)
https://doi.org/10.1007/s11661-022-06717-y

The Microstructure Evolution during Divorced Eutectoid Transformation in a κ-Carbide Reinforced High Specific Young’s Modulus Steel

Fuming Yang, Peng Chen and Xiaowu Li
Crystals 12 (10) 1372 (2022)
https://doi.org/10.3390/cryst12101372

On the Tribocorrosion Behavior of Fe-Mn-Al-C Alloys in Ringer’s Solution

Gisselle M. Barona-Osorio, Leonel A. Teran, Sara A. Rodríguez and John J. Coronado
Metals 12 (8) 1339 (2022)
https://doi.org/10.3390/met12081339

Effects of Cr on pitting corrosion resistance and passive film properties of austenitic Fe–19Mn–12Al–1.5 C lightweight steel

Heon-Young Ha, Kyeong-Won Kim, Seong-Jun Park, Tae-Ho Lee, Hyungkwon Park, Joonoh Moon, Hyun-Uk Hong and Chang-Hoon Lee
Corrosion Science 206 110529 (2022)
https://doi.org/10.1016/j.corsci.2022.110529

Partitioning-related microstructure evolution and mechanical behavior in a δ-quenching and partitioning steel

P. Chen, X.W. Li, P.F. Wang, G.D. Wang, J.Y. Guo, R.D. Liu and H.L. Yi
Journal of Materials Research and Technology 17 1338 (2022)
https://doi.org/10.1016/j.jmrt.2022.01.076

The current state and the prospects for the development of high-plasticity ultrastrong Fe-Mn-Al-C steels

O.P. Verzilov, M.M. Voron, A.Yu. Semenko and V.Zh. Shemet
Metal and Casting of Ukraine 29 (2) 101 (2021)
https://doi.org/10.15407/steelcast2021.02.101

High Temperature Deformation Behavior and Microstructure Evolution of Low-Density Steel Fe30Mn11Al1C Micro-Alloyed with Nb and V

Hui Wang, Ziyuan Gao, Zhiyue Shi, Haifeng Xu, Ling Zhang, Guilin Wu, Chang Wang, Cunyu Wang, Yuqing Weng and Wenquan Cao
Materials 14 (21) 6555 (2021)
https://doi.org/10.3390/ma14216555

A high specific Young’s modulus steel reinforced by spheroidal kappa-carbide

P. Chen, J. Fu, X. Xu, C. Lin, J.C. Pang, X.W. Li, R.D.K. Misra, G.D. Wang and H.L. Yi
Journal of Materials Science & Technology 87 54 (2021)
https://doi.org/10.1016/j.jmst.2021.01.033

Influence of Si and Al contents and isothermal treatment condition on the microstructure and tensile properties in ultra-high strength Fe-0.2C-2.0Mn martensite-bainite complex phase steels

Eung Hyuk Lee, Chang Jae Yu, Hong-Bum Lee, Ji-Hoon Kim and Dong-Woo Suh
Korean Journal of Metals and Materials 59 (9) 602 (2021)
https://doi.org/10.3365/KJMM.2021.59.9.602

Microstructural Evolution Study of Fe–Mn–Al–C Steels Through Variable Thermomechanical Treatments

J. F. Durán, G. A. Pérez, J. S. Rodríguez, et al.
Metallurgical and Materials Transactions A 52 (11) 4785 (2021)
https://doi.org/10.1007/s11661-021-06424-0

Improvement of strength – ductility balance of B2-strengthened lightweight steel

J.H. Hwang, T.T.T. Trang, O. Lee, Gyeongbae Park, A. Zargaran and Nack J. Kim
Acta Materialia 191 1 (2020)
https://doi.org/10.1016/j.actamat.2020.03.022

The κ-Carbides in Low-Density Fe-Mn-Al-C Steels: A Review on Their Structure, Precipitation and Deformation Mechanism

Peng Chen, Xiaowu Li and Hongliang Yi
Metals 10 (8) 1021 (2020)
https://doi.org/10.3390/met10081021

Enhanced Mechanical Properties of a Gradient Nanostructured Medium Manganese Steel and Its Grain Refinement Mechanism

Lei Wang, Meiyu Li, Hao Tan, Yueming Feng and Yuntao Xi
Journal of Materials Engineering and Performance 29 (6) 3812 (2020)
https://doi.org/10.1007/s11665-020-04903-w

Microstructure and Tensile Properties of Ferritic Lightweight Steel Produced by Twin-Roll Casting

Yunik Kwon, Ji Hyun Hwang, Hee Chae Choi, et al.
Metals and Materials International 26 (1) 75 (2020)
https://doi.org/10.1007/s12540-019-00314-2

Realization of Selective Strengthening of Ferrite by Nb/V Microalloying in a Medium Carbon Lightweight δ-TRIP Steel

Lan Ye, Junfeng Wang, Zhaoli Zeng, et al.
Metallurgical and Materials Transactions A 51 (5) 2460 (2020)
https://doi.org/10.1007/s11661-020-05676-6

Effect of Cr and Mn Addition on the Microstructure, Texture, and Mechanical Properties of Ternary Low-Density Steels

Sudipta Pramanik and Satyam Suwas
Journal of Materials Engineering and Performance 29 (7) 4435 (2020)
https://doi.org/10.1007/s11665-020-04930-7

Microstructural and Mechanical Characterization of Ti‐Containing Twinning‐Induced Plasticity Steel Welded Joint Produced by Gas Tungsten Arc Welding Process

Humberto Hernández-Belmontes, Ignacio Mejía, José Antonio Benito and José María Cabrera
steel research international 91 (9) (2020)
https://doi.org/10.1002/srin.202000129

Stress corrosion cracking and precipitation strengthening mechanism in TWIP steels: progress and prospects

Temitope Olumide Olugbade
Corrosion Reviews 38 (6) 473 (2020)
https://doi.org/10.1515/corrrev-2020-0052

Effect of Niobium Addition on Microstructure and Mechanical Properties of Fe–7Al–0.35C Low-Density Steel

Shivkumar Khaple, Ujjwal Prakash, Brahma Raju Golla and V. V. Satya Prasad
Metallography, Microstructure, and Analysis 9 (2) 127 (2020)
https://doi.org/10.1007/s13632-020-00622-9

Softening and recrystallization behavior of a new class of ferritic steel

Xiang-yu Xu, Jian-zhe Li, Xue-min Wang, et al.
Journal of Iron and Steel Research International 26 (2) 154 (2019)
https://doi.org/10.1007/s42243-019-00230-0

Development of 3rd generation Medium Mn duplex steels for automotive applications

Astrid Perlade, Annie Antoni, Rémy Besson, Daniel Caillard, Michael Callahan, Jonathan Emo, Anne-Françoise Gourgues, Philippe Maugis, Aurore Mestrallet, Ludovic Thuinet, Quentin Tonizzo and Jean-Hubert Schmitt
Materials Science and Technology 35 (2) 204 (2019)
https://doi.org/10.1080/02670836.2018.1549303

Experimental and theoretical study on static recrystallization of a low-density ferritic steel containing 4 mass% aluminum

Xiangyu Xu, Jianzhe Li, Weijie Li, Qiannan Liu, Dan Liu, Xuemin Wang, Jingliang Wang, Chengjia Shang and R.D.K. Misra
Materials & Design 180 107924 (2019)
https://doi.org/10.1016/j.matdes.2019.107924

Hot Deformation Behavior of Fe-6.8Al Low-Density and AISI 1040 Steels

Sudipta Pramanik, Tushar S. Pund, G. S. Avadhani and Satyam Suwas
Materials Performance and Characterization 8 (5) 902 (2019)
https://doi.org/10.1520/MPC20190019

Microstructural Characterisation of Ti Containing Fe-7Al-0.35C Based Low-Density Steel

Shivkumar Khaple, V. V. Satya Prasad and Brahma Raju Golla
Transactions of the Indian Institute of Metals 71 (11) 2713 (2018)
https://doi.org/10.1007/s12666-018-1434-5

Frontiers in Materials Processing, Applications, Research and Technology

L. A. Dobrzański, W. Borek and J. Mazurkiewicz
Frontiers in Materials Processing, Applications, Research and Technology 321 (2018)
https://doi.org/10.1007/978-981-10-4819-7_27

Un estudio adicional de la cinética de recristalización y crecimiento de grano del acero twip laminado en frío

Fernando De las Cuevas, Claudio Aguilar and Javier Gil Sevillano
Revista de Metalurgia 54 (4) 131 (2018)
https://doi.org/10.3989/revmetalm.131

Nano-mechanical properties of Fe-Mn-Al-C lightweight steels

Alireza Rahnama, Hiren Kotadia, Samuel Clark, Vit Janik and Seetharaman Sridhar
Scientific Reports 8 (1) (2018)
https://doi.org/10.1038/s41598-018-27345-w

Calculation of phase equilibria in Al-Fe-Mn ternary system involving three new ternary intermetallic compounds

Lu-Hai Zhou, Zhu Li, Shu-Sen Wang, et al.
Advances in Manufacturing 6 (2) 247 (2018)
https://doi.org/10.1007/s40436-017-0199-0

Strengthening mechanisms in Fe-Al based ferritic low-density steels

Sudipta Pramanik, Suresh Koppoju, A.V. Anupama, Balaram Sahoo and Satyam Suwas
Materials Science and Engineering: A 712 574 (2018)
https://doi.org/10.1016/j.msea.2017.10.056

Hot deformation of a Fe-Mn-Al-C steel susceptible of κ-carbide precipitation

O.A. Zambrano, J. Valdés, Y. Aguilar, et al.
Materials Science and Engineering: A 689 269 (2017)
https://doi.org/10.1016/j.msea.2017.02.060

Development of Structural Steel Containing 3÷5 wt% Al with Microlaminated Microstructure

B. Garbarz, M. Adamczyk and B. Niżnik-Harańczyk
Archives of Metallurgy and Materials 62 (4) 2309 (2017)
https://doi.org/10.1515/amm-2017-0340

Mechanical properties and electronic structures of Fe-Al intermetallic

YaHui Liu, XiaoYu Chong, YeHua Jiang, Rong Zhou and Jing Feng
Physica B: Condensed Matter 506 1 (2017)
https://doi.org/10.1016/j.physb.2016.10.032

Internal oxidation behaviour of Fe-Mn-Al-C duplex light-weight steels with good combination of strength and ductility

Wei Peng, Zhaoyu Wu, Yulai Xu, et al.
Corrosion Science 120 148 (2017)
https://doi.org/10.1016/j.corsci.2017.03.005

Stability, electronic structures, and mechanical properties of Fe–Mn–Al system from first-principles calculations

Ya-Hui Liu, Xiao-Yu Chong, Ye-Hua Jiang and Jing Feng
Chinese Physics B 26 (3) 037102 (2017)
https://doi.org/10.1088/1674-1056/26/3/037102

Equal channel angular pressing of a TWIP steel: microstructure and mechanical response

L. Wang, J. A. Benito, J. Calvo and J. M. Cabrera
Journal of Materials Science 52 (11) 6291 (2017)
https://doi.org/10.1007/s10853-017-0862-7

Effect of TiB 2 and ZrB 2 additions on structure and properties of Fe-7Al based light weight steel

Shivkumar Khaple, V.V. Satya Prasad, Brahma Raju Golla, R.G. Baligidad and A.A. Gokhale
Materials Science and Engineering: A 697 167 (2017)
https://doi.org/10.1016/j.msea.2017.05.011

Weldability of High-Mn Austenitic Twinning-Induced Plasticity (TWIP) Steel Microalloyed with Nb

I. Mejía, H. Hernández-Belmontes and C. Maldonado
MRS Advances 2 (62) 3899 (2017)
https://doi.org/10.1557/adv.2018.108

Effect of Ni alloying on the microstructural evolution and mechanical properties of two duplex light-weight steels during different annealing temperatures: Experiment and phase-field simulation

Alireza Rahnama, Hiren Kotadia and Seetharaman Sridhar
Acta Materialia 132 627 (2017)
https://doi.org/10.1016/j.actamat.2017.03.043

HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015

Mingsheng Xia, Ge Jie, Bin Han, et al.
HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015 865 (2016)
https://doi.org/10.1007/978-3-319-48767-0_108

Effect of Coiling Temperature on Microstructure and Tensile Behavior of a Hot-Rolled Ferritic Lightweight Steel

Junfeng Wang, Qi Yang, Xiaodong Wang and Li Wang
Metallurgical and Materials Transactions A 47 (12) 5918 (2016)
https://doi.org/10.1007/s11661-016-3752-8

On the Microstructure and Properties of a High Al-Alloyed 100Cr6 Steel

Margarita D. Bambach, Andreas Stieben and Wolfgang Bleck
steel research international 87 (3) 364 (2016)
https://doi.org/10.1002/srin.201500068