The trends of steel products in the European automotive industry
Rev. Met. Paris, 97 11 (2000) 1399-1408
Published online: 2002-10-25
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Mechanism of Cr on the Oxidation Behavior of Advanced High-Strength Steel during the Hot Rolled Coil Process
Qin Luo, Wentao Zhang, Shiheng Liu, Weichen Mao, Xinyan Jin and Guangxin WuMaterials Today Communications 112445 (2025)
https://doi.org/10.1016/j.mtcomm.2025.112445
Liquid Metal Embrittlement of Galvanized TRIP Steels in Resistance Spot Welding
Wook-Sang Jeon, Ashutosh Sharma and Jae Pil JungMetals 10 (6) 787 (2020)
https://doi.org/10.3390/met10060787
Predicting Failure Modes of Resistance Spot Welds from the Chemical Composition of Materials
Heewon Cho, Sangwoo Nam, Minjung Kang, Munjin Kang and Young-Min KimJournal of Welding and Joining 38 (5) 450 (2020)
https://doi.org/10.5781/JWJ.2020.38.5.4
Fatigue Behaviors of Resistance Spot Welds for 980 MPa Grade TRIP Steel
Heewon Cho, Sangwoo Nam, Insung Hwang, Je Hoon Oh, Munjin Kang and Young-Min KimMetals 9 (10) 1086 (2019)
https://doi.org/10.3390/met9101086
Effects of biaxial tensile on the deformation behavior of DP590 high-strength steel sheet under high strain rate
Yu Lei, Shangyu Huang, Zhenghua Meng, Jianhua Hu and Mengcheng ZhouJournal of Wuhan University of Technology-Mater. Sci. Ed. 32 (6) 1441 (2017)
https://doi.org/10.1007/s11595-017-1766-8
Analysis of properties laser welded RAK 40/70 steel sheets
E Evin, M Tomáš and M FujdaIOP Conference Series: Materials Science and Engineering 266 012003 (2017)
https://doi.org/10.1088/1757-899X/266/1/012003
Strain Hardening Behavior Prediction Model For Automotive High Strength Multiphase Steels
Antonella Dimatteo, Valentina Colla, Gianfranco Lovicu and Renzo Valentinisteel research international 86 (12) 1574 (2015)
https://doi.org/10.1002/srin.201400544
Dissimilar Metal Active Gas Welding of TWIP and DP Steel Sheets
Pasquale Russo Spena, Paolo Matteis and Giorgio Scavinosteel research international 86 (5) 495 (2015)
https://doi.org/10.1002/srin.201400154
Selection of Materials for the Body Deformation Zones
Emil EvinKey Engineering Materials 635 182 (2014)
https://doi.org/10.4028/www.scientific.net/KEM.635.182
Dissimilar Arc Welding of Advanced High-Strength Car-Body Steel Sheets
P. Russo Spena, F. D’Aiuto, P. Matteis and G. ScavinoJournal of Materials Engineering and Performance 23 (11) 3949 (2014)
https://doi.org/10.1007/s11665-014-1209-z
Stress distribution in adhesively-bonded joints and the loading capacity of hybrid joints of car body steels for the automotive industry
Bartosz Bartczak, Jacek Mucha and Tomasz TrzepiecińskiInternational Journal of Adhesion and Adhesives 45 42 (2013)
https://doi.org/10.1016/j.ijadhadh.2013.03.012
Microstructure and Mechanical Properties in Ultra-High Strength Steel with Tensile Strength 1000MPa
Yu Xi Ma, Bin Guo, Lin Zheng, et al.Advanced Materials Research 567 79 (2012)
https://doi.org/10.4028/www.scientific.net/AMR.567.79
Experimental and Numerical Analysis of an In-Plane Shear Specimen Designed for Ductile Fracture Studies
F. Gao, L. Gui and Z. FanExperimental Mechanics 51 (6) 891 (2011)
https://doi.org/10.1007/s11340-010-9385-8
Texture evolution of 440 MPa grade Nb-bearing high strength IF steel during rolling and annealing process
Yinli Chen, Lan Su, Aimin Zhao, et al.Journal of Wuhan University of Technology-Mater. Sci. Ed. 26 (6) 1157 (2011)
https://doi.org/10.1007/s11595-011-0381-3
Prediction of Continuous Cooling Transformation Diagrams for Dual-Phase Steels from the Intercritical Region
V. Colla, M. DeSanctis, A. Dimatteo, G. Lovicu and R. ValentiniMetallurgical and Materials Transactions A 42 (9) 2781 (2011)
https://doi.org/10.1007/s11661-011-0702-3
Strain Hardening Behavior of Dual-Phase Steels
V. Colla, M. De Sanctis, A. Dimatteo, et al.Metallurgical and Materials Transactions A 40 (11) 2557 (2009)
https://doi.org/10.1007/s11661-009-9975-1
Evaluation of the Annealing Temperature Effect on the Mechanical Properties of a IF Steel by Means of Physical Simulation
Doru Cantemir and R. ValentiniKey Engineering Materials 344 63 (2007)
https://doi.org/10.4028/www.scientific.net/KEM.344.63
Influence of Continuous Annealing Parameters on the Mechanical Properties of Cold Rolled Ultra High Strength Steels
Xiao Dong ZhuMaterials Science Forum 539-543 4277 (2007)
https://doi.org/10.4028/www.scientific.net/MSF.539-543.4277
1 (2005)
https://doi.org/10.4271/2005-01-0704
1 (2003)
https://doi.org/10.4271/2003-01-1295