Mechanical behaviour of multiphase materials : an intermediate mixture law without fitting parameter
Rev. Met. Paris, 99 1 (2002) 71-77
Published online: 2002-10-25
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Strong yet ductile low-density steel via multiphase heterogeneous microstructure
Jiahe YAN, Zhinan YANG, Jinliang DU, Yunli FENG, Minghe ZHANG, Xiaoyong FENG and Fucheng ZHANGChinese Journal of Aeronautics 39 (1) 103802 (2026)
https://doi.org/10.1016/j.cja.2025.103802
Full-Field Quantitative Determination of Strain and Stress Partitioning in Medium Mn TRIP Steels
Xiangbo Hu, Chenghuan Liu, Xiaogang Wang and Chao JiangMetals and Materials International 30 (4) 953 (2024)
https://doi.org/10.1007/s12540-023-01542-3
Bridging between Heterogeneous Local Strain Distribution and Macroscopic Stress-strain Curves
Manabu Takahashi, Kotaro Ueno, Kenta Sakaguchi, Kohtaro Hayashi, Hiroyuki Kawata and Shigeto YamasakiTetsu-to-Hagane 110 (3) 90 (2024)
https://doi.org/10.2355/tetsutohagane.TETSU-2023-063
Behavior of TRIP-aided medium Mn steels investigated by in situ synchrotron X-ray diffraction experiments and microstructure-based micromechanical modelling
Mathias Lamari, Sébastien Y.P. Allain, Guillaume Geandier, Marc Ponçot, Astrid Perlade and Kangying ZhuInternational Journal of Plasticity 173 103866 (2024)
https://doi.org/10.1016/j.ijplas.2023.103866
Asynchronous Multi-Information Source Bayesian Optimization
Danial Khatamsaz, Raymundo Arroyave and Douglas L. AllaireJournal of Mechanical Design 146 (10) (2024)
https://doi.org/10.1115/1.4065064
Effects of Intercritical Annealing on Microstructure and Mechanical Properties of Low C-Mn Steels
Swarup Kumar Ghosh and Muralidhar YadavMetallography, Microstructure, and Analysis 13 (5) 817 (2024)
https://doi.org/10.1007/s13632-024-01106-w
The Influence of Thermomechanical Conditions on the Hot Ductility of Continuously Cast Microalloyed Steels
Saham Sadat Sharifi, Saeid Bakhtiari, Esmaeil Shahryari, Christof Sommitsch and Maria Cecilia PolettiMaterials 17 (18) 4551 (2024)
https://doi.org/10.3390/ma17184551
Bridging between Heterogeneous Local Strain Distribution and Macroscopic Stress-strain Curves
Manabu Takahashi, Kotaro Ueno, Kenta Sakaguchi, Kohtaro Hayashi, Hiroyuki Kawata and Shigeto YamasakiISIJ International 64 (2) 345 (2024)
https://doi.org/10.2355/isijinternational.ISIJINT-2023-140
A numerical study on the effects of DP steel microstructure on the yield locus and the stress–strain response under strain path change
Afaf Saai, Odd Sture Hopperstad, Jenny Fritz and Joachim LarssonInternational Journal of Material Forming 16 (1) (2023)
https://doi.org/10.1007/s12289-022-01731-2
Modeling Bainite Dual-Phase Steels: A High-Resolution Crystal Plasticity Simulation Study
Francisco-José Gallardo-Basile, Franz Roters, Robin M. Jentner, et al.Crystals 13 (4) 673 (2023)
https://doi.org/10.3390/cryst13040673
1 (2023)
https://doi.org/10.1002/9781394257430.ch1
Constitutive Flow Equation for Cast Austenite–Ferrite Stainless Steels
Ghiath MonnetMetallurgical and Materials Transactions A 54 (1) 53 (2023)
https://doi.org/10.1007/s11661-022-06836-6
Plastic energy-based analytical approach to predict the mechanical response of two-phase materials with application to dual-phase steels
Sudeep K. Sahoo, Laszlo S. Toth, Alain Molinari, Marat I. Latypov and Olivier BouazizEuropean Journal of Mechanics - A/Solids 91 104414 (2022)
https://doi.org/10.1016/j.euromechsol.2021.104414
On the importance of microstructure information in materials design: PSP vs PP
Abhilash Molkeri, Danial Khatamsaz, Richard Couperthwaite, Jaylen James, Raymundo Arróyave, Douglas Allaire and Ankit SrivastavaActa Materialia 223 117471 (2022)
https://doi.org/10.1016/j.actamat.2021.117471
63 (2022)
https://doi.org/10.1016/B978-0-12-803581-8.12062-4
An extended tensile flow curve model for carburized steels
Tianyu Zhang, Jian Wang, Zhizhou Pan and Qing TaoMaterials Science and Engineering: A 832 142452 (2022)
https://doi.org/10.1016/j.msea.2021.142452
499 (2022)
https://doi.org/10.1007/978-3-031-06212-4_46
Microstructural Size Effect on Strain-Hardening of As-Quenched Low-Alloyed Martensitic Steels
Kenta Sakaguchi, Shigeto Yamasaki, Hiroyuki Kawata, Kohtaro Hayashi and Manabu TakahashiISIJ International 62 (10) 2008 (2022)
https://doi.org/10.2355/isijinternational.ISIJINT-2022-114
Experimental and Modeling Study of Phase-Specific Flow Stress Distribution in Intercritically Annealed Quenching and Partitioning Steels
Pengfei Gao, Feng Li, Ke An and Zhengzhi ZhaoCrystals 12 (10) 1412 (2022)
https://doi.org/10.3390/cryst12101412
The effect of strain-induced martensite transformation on strain partitioning and damage evolution in a duplex stainless steel with metastable austenite
Lei Chen, Qixiang Jia, Shuo Hao, Yongxin Wang, Cheng Peng, Xiaocong Ma, Zongyuan Zou and Miao JinMaterials Science and Engineering: A 814 141173 (2021)
https://doi.org/10.1016/j.msea.2021.141173
The BAREFOOT Optimization Framework
Richard Couperthwaite, Danial Khatamsaz, Abhilash Molkeri, et al.Integrating Materials and Manufacturing Innovation 10 (4) 644 (2021)
https://doi.org/10.1007/s40192-021-00235-2
Adaptive active subspace-based efficient multifidelity materials design
Danial Khatamsaz, Abhilash Molkeri, Richard Couperthwaite, Jaylen James, Raymundo Arróyave, Ankit Srivastava and Douglas AllaireMaterials & Design 209 110001 (2021)
https://doi.org/10.1016/j.matdes.2021.110001
Realistic morphology-based Representative Volume Elements for dual-phase steels
E. Espinosa, A. Sardar, C.H.M. Simha and A. BardelcikMechanics of Materials 160 103961 (2021)
https://doi.org/10.1016/j.mechmat.2021.103961
Deformation-induced Martensite Transformation Behavior during Tensile and Compressive Deformation in Low-alloy TRIP Steel Sheets
Hiroyuki Kawata, Takashi Yasutomi, Satoshi Shirakami, Kohki Nakamura and Eisaku SakuradaISIJ International 61 (2) 527 (2021)
https://doi.org/10.2355/isijinternational.ISIJINT-2020-382
Microhardness model based on geometrically necessary dislocations for heterogeneous material
Mohammed Mendas, Stéphane Benayoun, Mohamed Hadj Miloud and Ibrahim ZidaneJournal of Materials Research and Technology 15 2792 (2021)
https://doi.org/10.1016/j.jmrt.2021.09.093
A high specific Young’s modulus steel reinforced by spheroidal kappa-carbide
P. Chen, J. Fu, X. Xu, C. Lin, J.C. Pang, X.W. Li, R.D.K. Misra, G.D. Wang and H.L. YiJournal of Materials Science & Technology 87 54 (2021)
https://doi.org/10.1016/j.jmst.2021.01.033
A multiscale constitutive model coupled with martensitic transformation kinetics for micro-scaled plastic deformation of metastable metal foils
B. Meng, Y.Z. Liu, M. Wan and M.W. FuInternational Journal of Mechanical Sciences 202-203 106503 (2021)
https://doi.org/10.1016/j.ijmecsci.2021.106503
Efficiently exploiting process-structure-property relationships in material design by multi-information source fusion
Danial Khatamsaz, Abhilash Molkeri, Richard Couperthwaite, Jaylen James, Raymundo Arróyave, Douglas Allaire and Ankit SrivastavaActa Materialia 206 116619 (2021)
https://doi.org/10.1016/j.actamat.2020.116619
Investigation and mean-field modelling of microstructural mechanisms driving the tensile properties of dual-phase steels
Alexandre Mathevon, Damien Fabrègue, Véronique Massardier, Sophie Cazottes, Philippe Rocabois and Michel PerezMaterials Science and Engineering: A 822 141532 (2021)
https://doi.org/10.1016/j.msea.2021.141532
Materials Design Through Batch Bayesian Optimization with Multisource Information Fusion
Richard Couperthwaite, Abhilash Molkeri, Danial Khatamsaz, et al.JOM 72 (12) 4431 (2020)
https://doi.org/10.1007/s11837-020-04396-x
Phenomenological model for yield, flow, and failure behavior of dual-phase steels
Arshdeepsingh Sardar, C.H.M. Simha and A. BardelcikMaterials Science and Engineering: A 798 140136 (2020)
https://doi.org/10.1016/j.msea.2020.140136
An analytical model to predict strain-hardening behaviour and twin volume fraction in a profoundly twinning magnesium alloy
Sudeep K. Sahoo, Laszlo S. Toth and Somjeet BiswasInternational Journal of Plasticity 119 273 (2019)
https://doi.org/10.1016/j.ijplas.2019.04.007
Efficient use of multiple information sources in material design
Seyede Fatemeh Ghoreishi, Abhilash Molkeri, Raymundo Arróyave, Douglas Allaire and Ankit SrivastavaActa Materialia 180 260 (2019)
https://doi.org/10.1016/j.actamat.2019.09.009
Martensite transformation behavior and mechanical properties of cold-rolled metastable Cr-Mn-Ni-N austenitic stainless steels
Yichong Zhang, Moucheng Li, Hongyun Bi, et al.Materials Science and Engineering: A 724 411 (2018)
https://doi.org/10.1016/j.msea.2018.03.113
Link between Microstructure and Mechanical Behavior of Double Annealed Medium Mn Steel
Artem Arlazarov, Mohamed Goune, Alain Hazotte, Olivier Bouaziz and Frédéric KegelMaterials Science Forum 941 524 (2018)
https://doi.org/10.4028/www.scientific.net/MSF.941.524
Multi-Information Source Fusion and Optimization to Realize ICME: Application to Dual-Phase Materials
Seyede Fatemeh Ghoreishi, Abhilash Molkeri, Ankit Srivastava, Raymundo Arroyave and Douglas AllaireJournal of Mechanical Design 140 (11) (2018)
https://doi.org/10.1115/1.4041034
Effect of Revolutionary Pitch on Interface Microstructure and Mechanical Behavior of Friction Stir Lap Welds of AA6082-T6 to Galvanized DP800
Shuhan Li, Yuhua Chen, Jidong Kang, Babak Shalchi Amirkhiz and Francois NadeauMetals 8 (11) 925 (2018)
https://doi.org/10.3390/met8110925
Prediction of mechanical behavior of ferrite-pearlite steel
Lei Wang, Di Tang and Yong SongJournal of Iron and Steel Research International 24 (3) 321 (2017)
https://doi.org/10.1016/S1006-706X(17)30046-8
Towards a micromechanical based description for strength increase in dual phase steels during bake-hardening process
A. Ramazani, A. Serafeim and U. PrahlMaterials Science and Engineering: A 702 386 (2017)
https://doi.org/10.1016/j.msea.2017.07.017
A study on homogenization methods for steels with varying content of ferrite, bainite and martensite
Stefan Golling, Rickard Östlund and Mats OldenburgJournal of Materials Processing Technology 228 88 (2016)
https://doi.org/10.1016/j.jmatprotec.2015.07.007
3D micromechanical modeling of dual phase steels using the representative volume element method
Maedeh Amirmaleki, Javad Samei, Daniel E. Green, Isadora van Riemsdijk and Lorna StewartMechanics of Materials 101 27 (2016)
https://doi.org/10.1016/j.mechmat.2016.07.011
High-modulus steels reinforced with ceramic particles through ingot casting process
S. Chen, P. Seda, M. Krugla and A. RijkenbergMaterials Science and Technology 32 (10) 992 (2016)
https://doi.org/10.1080/02670836.2015.1104082
Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steel
Eun Jung Seo, Lawrence Cho, Yuri Estrin and Bruno C. De CoomanActa Materialia 113 124 (2016)
https://doi.org/10.1016/j.actamat.2016.04.048
Characterization and modeling of mechanical behavior of quenching and partitioning steels
A. Arlazarov, O. Bouaziz, J.P. Masse and F. KegelMaterials Science and Engineering: A 620 293 (2015)
https://doi.org/10.1016/j.msea.2014.10.034
Describing the deformation behaviour of TRIP and dual phase steels employing an irreversible thermodynamics formulation
S. Li, P. Honarmandi, R. Arróyave and P. E. J. Rivera-Diaz-del-CastilloMaterials Science and Technology 31 (13) 1658 (2015)
https://doi.org/10.1179/1743284715Y.0000000076
Towards the microstructure design of DP steels: A generic size-sensitive mean-field mechanical model
S.Y.P. Allain, O. Bouaziz, I. Pushkareva and C.P. ScottMaterials Science and Engineering: A 637 222 (2015)
https://doi.org/10.1016/j.msea.2015.04.017
Influences of Microstructure Characteristics on Forming Limit Behavior of Dual Phase Steels
Thipwipa Sirinakorn, Sawitree Sodjit and Vitoon Uthaisangsuksteel research international 86 (12) 1594 (2015)
https://doi.org/10.1002/srin.201400584
A dislocation-based model for deformation and size effect in multi-phase steels
Hao Lyu, Annie Ruimi and Hussein M. ZbibInternational Journal of Plasticity 72 44 (2015)
https://doi.org/10.1016/j.ijplas.2015.05.005
Characterization and Modeling of Failure Initiation in Bainite‐Aided DP Steel
Ali Ramazani, Yuling Chang and Ulrich PrahlAdvanced Engineering Materials 16 (11) 1370 (2014)
https://doi.org/10.1002/adem.201300556
Determination of bulk flow properties of a material from the flow properties of its constituent phases
Surajit Kumar Paul and Monideepa MukherjeeComputational Materials Science 84 1 (2014)
https://doi.org/10.1016/j.commatsci.2013.11.039
Micro–macro-characterisation and modelling of mechanical properties of gas metal arc welded (GMAW) DP600 steel
A. Ramazani, K. Mukherjee, A. Abdurakhmanov, et al.Materials Science and Engineering: A 589 1 (2014)
https://doi.org/10.1016/j.msea.2013.09.056
High modulus steels: new requirement of automotive market. How to take up challenge?
F. Bonnet, V. Daeschler and G. PetitgandCanadian Metallurgical Quarterly 53 (3) 243 (2014)
https://doi.org/10.1179/1879139514Y.0000000144
Mechanical Behaviour Modelling of an Mg-Stabilized Zirconia Reinforced TRIP-Matrix-Composite under Cold Working Conditions
Sergey Guk, Wolfhart Müller, Katja Pranke and Rudolf KawallaMaterials Sciences and Applications 05 (11) 812 (2014)
https://doi.org/10.4236/msa.2014.511081
Correlation between 2D and 3D flow curve modelling of DP steels using a microstructure-based RVE approach
A. Ramazani, K. Mukherjee, H. Quade, U. Prahl and W. BleckMaterials Science and Engineering: A 560 129 (2013)
https://doi.org/10.1016/j.msea.2012.09.046
Quantification of the effect of transformation-induced geometrically necessary dislocations on the flow-curve modelling of dual-phase steels
A. Ramazani, K. Mukherjee, A. Schwedt, et al.International Journal of Plasticity 43 128 (2013)
https://doi.org/10.1016/j.ijplas.2012.11.003
Computational design of nanostructured steels employing irreversible thermodynamics
P. E. J. Rivera-Díaz-del-Castillo, K. Hayashi and E. I. Galindo-NavaMaterials Science and Technology 29 (10) 1206 (2013)
https://doi.org/10.1179/1743284712Y.0000000179
Characterization and modelling of failure initiation in DP steel
A. Ramazani, A. Schwedt, A. Aretz, U. Prahl and W. BleckComputational Materials Science 75 35 (2013)
https://doi.org/10.1016/j.commatsci.2013.04.001
Characterisation of microstructure and modelling of flow behaviour of bainite-aided dual-phase steel
A. Ramazani, P.T. Pinard, S. Richter, A. Schwedt and U. PrahlComputational Materials Science 80 134 (2013)
https://doi.org/10.1016/j.commatsci.2013.05.017
Microstructure based prediction of strain hardening behavior of dual phase steels
Sawitree Sodjit and Vitoon UthaisangsukMaterials & Design 41 370 (2012)
https://doi.org/10.1016/j.matdes.2012.05.010
Transformation-Induced, Geometrically Necessary, Dislocation-Based Flow Curve Modeling of Dual-Phase Steels: Effect of Grain Size
Ali Ramazani, Krishnendu Mukherjee, Ulrich Prahl and Wolfgang BleckMetallurgical and Materials Transactions A 43 (10) 3850 (2012)
https://doi.org/10.1007/s11661-012-1196-3
Effective strain rate sensitivity of two phase materials
László S. Tóth, Alain Molinari and Olivier BouazizMaterials Science and Engineering: A 524 (1-2) 186 (2009)
https://doi.org/10.1016/j.msea.2009.06.041
Static Strain Aging of Microstructural Constituents in Transformation-Induced-Plasticity Steel
L. Samek, E. De Moor, J. Penning, J.G. Speer and B.C. De CoomanMetallurgical and Materials Transactions A 39 (11) 2542 (2008)
https://doi.org/10.1007/s11661-008-9605-3
Evaluation of the Static Stress-Strain Behaviour of Phosphorus Alloyed and Titanium Micro-alloyed TRIP Steels
J. Bouquerel, K. Verbeken, D. Krizan, et al.steel research international 79 (10) 784 (2008)
https://doi.org/10.1002/srin.200806199
The mechanical response of compositionally graded materials
Lorenzo Coco, Florent Lefevre-Schlick, Olivier Bouaziz, et al.Materials Science and Engineering: A 483-484 266 (2008)
https://doi.org/10.1016/j.msea.2006.12.164
Twinning Models in Self-Consistent Texture Simulations of TWIP Steels
Aruna Prakash, Thomas Hochrainer, Eduard Reisacher and Hermann Riedelsteel research international 79 (8) 645 (2008)
https://doi.org/10.1002/srin.200806178
Microstructure based modeling for the mechanical behavior of ferrite–pearlite steels suitable to capture isotropic and kinematic hardening
S. Allain and O. BouazizMaterials Science and Engineering: A 496 (1-2) 329 (2008)
https://doi.org/10.1016/j.msea.2008.06.009
Microstructural Design for Advanced Structural Steels
Olivier Bouaziz and J. David EmburyMaterials Science Forum 539-543 42 (2007)
https://doi.org/10.4028/www.scientific.net/MSF.539-543.42
Application of microstructural modelling for quality control and process improvement in hot rolled steels
A. Perlade, D. Grandemange and T. IungIronmaking & Steelmaking 32 (4) 299 (2005)
https://doi.org/10.1179/174328105X45893
A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel
S. Allain, J.-P. Chateau and O. BouazizMaterials Science and Engineering: A 387-389 143 (2004)
https://doi.org/10.1016/j.msea.2004.01.060
Critical Assessment of the Micromechanical Behaviour of Dual Phase and Trip-Assisted Multiphase Steels
Q. Furnémont, G. Lacroix, S. Godet, K.T. Conlon and P.J. JacquesCanadian Metallurgical Quarterly 43 (1) 35 (2004)
https://doi.org/10.1179/cmq.2004.43.1.35
Durcissement par seconde phase dans les aciers
Jean-Hubert SchmittMécanique & Industries 5 (4) 451 (2004)
https://doi.org/10.1051/meca:2004045
A physically based model for TRIP-aided carbon steels behaviour
A. Perlade, O. Bouaziz and Q. FurnémontMaterials Science and Engineering: A 356 (1-2) 145 (2003)
https://doi.org/10.1016/S0921-5093(03)00121-7