Design of stainless steel automotive exhaust manifolds
Rev. Met. Paris, 101 7-8 (2004) 615-620
Published online: 2004-09-27
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Development of an experimental/numerical validation methodology for the design of exhaust manifolds of high performance internal combustion engines
Mariano Lorenzini, Saverio Giulio Barbieri, Valerio Mangeruga and Matteo GiacopiniEngineering Failure Analysis 152 107526 (2023)
https://doi.org/10.1016/j.engfailanal.2023.107526
Effect of Normalizing Treatment on Mechanical Properties of AISI 441 Stainless Steel Prepared by Investment Casting
Yukun Hu, Weimin Mao, Pengyu Yan and Naiyong LiMetals 11 (3) 474 (2021)
https://doi.org/10.3390/met11030474
Annealing treatment for improving the mechanical properties of 00Cr18Nb ferritic stainless steel prepared by investment casting
Yu-Kun Hu and Wei-Min MaoMaterials Research Express 8 (8) 086503 (2021)
https://doi.org/10.1088/2053-1591/ac18f6
Characterization and modelling of both high-cycle hightemperature fatigue behaviour of Stainless Steel Grades
Pierre-Olivier Santacreu, Cloé Prudhomme, Benoit Proult, Isabelle Evenepoel and G. HénaffMATEC Web of Conferences 165 19008 (2018)
https://doi.org/10.1051/matecconf/201816519008
Increasing the formability of ferritic stainless steel tube by granular medium-based hot forming
H Chen, D Staupendahl, L Hiegemann and A E TekkayaJournal of Physics: Conference Series 896 012009 (2017)
https://doi.org/10.1088/1742-6596/896/1/012009
Microstructure, Creep and Thermomechanical Fatigue of Novel Solid Solution and Laves Phase Strengthened Cr2O3 and Al2O3 Forming Ferrites for Car Engine Exhaust and Heat Exchanger Systems
Tilmann Beck, Bernd Kuhn, T. Eckardt and L. SingheiserTransactions of the Indian Institute of Metals 69 (2) 379 (2016)
https://doi.org/10.1007/s12666-015-0747-x
Evolution of the Laves Phase in Ferritic Heat-Resistant Steels During Long-term Annealing and its Influence on the High-Temperature Strength
Nilofar Nabiran, Simon Klein, Sebastian Weber and Werner TheisenMetallurgical and Materials Transactions A 46 (1) 102 (2015)
https://doi.org/10.1007/s11661-014-2505-9
Influence of filler wire composition on weld microstructures of a 444 ferritic stainless steel grade
V. Villaret, F. Deschaux-Beaume, C. Bordreuil, S. Rouquette and C. ChovetJournal of Materials Processing Technology 213 (9) 1538 (2013)
https://doi.org/10.1016/j.jmatprotec.2013.03.026
Characterization of Gas Metal Arc Welding welds obtained with new high Cr–Mo ferritic stainless steel filler wires
V. Villaret, F. Deschaux-Beaume, C. Bordreuil, et al.Materials & Design 51 474 (2013)
https://doi.org/10.1016/j.matdes.2013.04.054
1 (2007)
https://doi.org/10.4271/2007-01-0564
Stainless Steels for Exhaust Lines
Francis Chassagne, Jean‐Denis Mithieux and Jean‐Hubert Schmittsteel research international 77 (9-10) 680 (2006)
https://doi.org/10.1002/srin.200606447