Selective oxidation of high Si, Mn and Al steel grades during recrystallization annealing and steel/Zn reactivity
Rev. Met. Paris, 101 10 (2004) 831-837
Published online: 2004-11-04
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Effect of inter-critical annealing atmosphere on microstructure and subsequent corrosion behavior of hot-dip galvanized Mn containing high-strength steel
Harikrishna Kancharla, G. K. Mandal, Nisheeth Kr. Prasad, K. Vishwanath, B. Bhushan, Kirtiratan Godbole, S. S. Singh and K. MondalJournal of Applied Electrochemistry 54 (5) 1153 (2024)
https://doi.org/10.1007/s10800-023-02011-w
Core level shifts as indicators of Cr chemistry on hydroxylated α-Al2O3(0001): a combined photoemission and first-principles study
Maya Messaykeh, Stéphane Chenot, Pascal David, et al.Physical Chemistry Chemical Physics 23 (38) 21852 (2021)
https://doi.org/10.1039/D1CP03224K
An In Situ and Real-Time Plasmonic Approach of Seed/Adhesion Layers: Chromium Buffer Effect at the Zinc/Alumina Interface
Maya Messaykeh, Stéphane Chenot, Pascal David, et al.Crystal Growth & Design 21 (6) 3528 (2021)
https://doi.org/10.1021/acs.cgd.1c00299
Structural characteristics of Al2O3 ultra-thin films supported on the NiAl(100) substrate from DFTB-aided global optimization
Maxime Van den Bossche, Jacek Goniakowski and Claudine NogueraNanoscale 13 (46) 19500 (2021)
https://doi.org/10.1039/D1NR05705G
Microstructure and mechanical properties of Nb and Ti microalloyed lightweight δ-TRIP steel
Zhaoli Zeng, Kolan Madhav Reddy, Shuangxi Song, Junfeng Wang, Li Wang and Xiaodong WangMaterials Characterization 164 110324 (2020)
https://doi.org/10.1016/j.matchar.2020.110324
Optimization of Anticorrosive Zinc Coatings: Tuning the Adhesion of Zinc/Silica Contact by Interfacial Ternary Oxide Formation
Jacopo Baima, Jacek Goniakowski, Claudine Noguera, Alexey Koltsov and Jean-Michel MataigneThe Journal of Physical Chemistry C 124 (17) 9337 (2020)
https://doi.org/10.1021/acs.jpcc.0c00617
Understanding the structural diversity of freestanding Al2O3 ultrathin films through a DFTB-aided genetic algorithm
Maxime Van den Bossche, Claudine Noguera and Jacek GoniakowskiNanoscale 12 (10) 6153 (2020)
https://doi.org/10.1039/C9NR10487A
Al-rich Fe0.85Al0.15(1 0 0), (1 1 0) and (1 1 1) surface structures
Zongbei Dai, Natalia Alyabyeva, Patrizia Borghetti, Stéphane Chenot, Pascal David, Alexey Koltsov, Gilles Renaud, Jacques Jupille, Gregory Cabailh and Rémi LazzariApplied Surface Science 509 145312 (2020)
https://doi.org/10.1016/j.apsusc.2020.145312
Lift-Off of Surface Oxides During Galvanizing of a Dual-Phase Steel in a Galvannealing Bath
K. F. Chen, I. Aslam, B. Li, et al.Metallurgical and Materials Transactions A 50 (8) 3748 (2019)
https://doi.org/10.1007/s11661-019-05276-z
Effect of Sn Addition, Process Atmosphere pO2, and Annealing Time on the Selective Oxidation of a C-2Mn-1.7Si (Wt Pct) Advanced High-Strength Steel During Continuous Galvanizing
G. Seyed Mousavi, B. Langelier and J. R. McDermidMetallurgical and Materials Transactions A 50 (6) 2898 (2019)
https://doi.org/10.1007/s11661-019-05202-3
Aluminium segregation profiles in the (110), (100) and (111) surface regions of the Fe0.85Al0.15 random body-centered cubic alloy
Zongbei Dai, Patrizia Borghetti, Stéphane Chenot, Pascal David, Alexey Koltsov, Jacques Jupille, Gregory Cabailh, Jacek Goniakowski and Rémi LazzariApplied Surface Science 492 886 (2019)
https://doi.org/10.1016/j.apsusc.2019.06.235
Structural, electronic and adhesion characteristics of zinc/silica interfaces: ab initio study on zinc/β-cristobalite
Ha-Linh Thi Le, Jacek Goniakowski, Claudine Noguera, Alexey Koltsov and Jean-Michel MataignePhysical Chemistry Chemical Physics 20 (9) 6254 (2018)
https://doi.org/10.1039/C7CP08636A
Effects of surface hydroxylation on adhesion at zinc/silica interfaces
Ha-Linh Thi Le, Jacek Goniakowski, Claudine Noguera, Alexey Koltsov and Jean-Michel MataignePhysical Chemistry Chemical Physics 20 (22) 15581 (2018)
https://doi.org/10.1039/C8CP02139B
Improving Adhesion at the Alumina/Zinc Interface by Stainless Steel Buffers
Ha-Linh Thi Le, Jacek Goniakowski, Claudine Noguera, Alexey Koltsov and Jean-Michel MataigneThe Journal of Physical Chemistry C 121 (45) 25143 (2017)
https://doi.org/10.1021/acs.jpcc.7b07112
New routes for improving adhesion at the metal/α-Al2O3(0001) interface
Rémi Cavallotti, Ha-Linh Thi Le, Jacek Goniakowski, et al.Physical Chemistry Chemical Physics 18 (4) 3032 (2016)
https://doi.org/10.1039/C5CP06435J
First-Principles Study on the Effect of Pure and Oxidized Transition-Metal Buffers on Adhesion at the Alumina/Zinc Interface
Ha-Linh Thi Le, Jacek Goniakowski, Claudine Noguera, Alexey Koltsov and Jean-Michel MataigneThe Journal of Physical Chemistry C 120 (18) 9836 (2016)
https://doi.org/10.1021/acs.jpcc.6b02182
Role of Surface Hydroxyl Groups on Zinc Adsorption Characteristics on α-Al2O3(0001) Surfaces: First-Principles Study
Rémi Cavallotti, Jacek Goniakowski, Rémi Lazzari, et al.The Journal of Physical Chemistry C 118 (25) 13578 (2014)
https://doi.org/10.1021/jp501318p
Tailoring of oxide morphology and crystallinity on advanced high-strength steel surfaces prior hot-dip galvanizing
R. Sagl, A. Jarosik, G. Angeli, et al.Acta Materialia 72 192 (2014)
https://doi.org/10.1016/j.actamat.2014.03.037
Influence of Oxide Morphologies on the Galvanizability of the Third Generation Automotive Steel
She Ming Jiang, Shi Jie Feng, Zhen Hua Li and Qi Fu ZhangAdvanced Materials Research 887-888 233 (2014)
https://doi.org/10.4028/www.scientific.net/AMR.887-888.233
Elaboration and characterization of Fe/silica-nanofilm tailored surfaces
Alexey Koltsov, Lydia Pavlova, Vladimir Kukin, et al.Surface and Coatings Technology 247 39 (2014)
https://doi.org/10.1016/j.surfcoat.2014.03.002
Influence of Oxide Morphologies on Galvanizability of Third Generation Automotive Steel
She-ming Jiang, Shi-jie Feng, Xun-hua Yuan, et al.Journal of Iron and Steel Research International 21 (11) 1059 (2014)
https://doi.org/10.1016/S1006-706X(14)60184-9
Selective oxidation of Al rich Fe–Mn–Al–C low density steels
T. K. Jeong, G. Jung, K. Lee, Y. B. Kang, H. K. D. H. Bhadeshia and D.-W. SuhMaterials Science and Technology 30 (14) 1805 (2014)
https://doi.org/10.1179/1743284713Y.0000000485
On the in-situ aluminothermic reduction of manganese oxides in continuous galvanizing baths
Ranganathan Kavitha and Joseph R. McDermidSurface and Coatings Technology 212 152 (2012)
https://doi.org/10.1016/j.surfcoat.2012.09.038
Influence of annealing treatment on wetting of steels by zinc alloys
M.-L. Giorgi, J. Diawara, S. Chen, A. Koltsov and J.-M. MataigneJournal of Materials Science 47 (24) 8483 (2012)
https://doi.org/10.1007/s10853-012-6696-4
The Impact of Selective Oxidation on the Phase Transformation in the Sub‐Surface of Advanced High Strength Steels
M. Norden, G. Paul, M. Blumenau, T. Heller and K.‐J. Peterssteel research international 82 (7) 839 (2011)
https://doi.org/10.1002/srin.201000268
Particle and Continuum Aspects of Mesomechanics
E. J. Petit, I. Sriti, M. Gilles, J. Gilgert and Z. AzariParticle and Continuum Aspects of Mesomechanics 593 (2010)
https://doi.org/10.1002/9780470610794.ch61
20 (2009)
https://doi.org/10.5151/2594-5297-15535
2967 (2008)
https://doi.org/10.5151/2594-5327-0321
Selective Oxidation and Surface Segregation in High Strength Steels during Short Term Annealing in H2‐N2 ‐ Influence of B on Surface Chemistry
Ivana Parezanović and Michael Spiegelsteel research international 76 (11) 832 (2005)
https://doi.org/10.1002/srin.200506102