Thermomechanical fatigue of stainless steels for automotive exhaust systems
Rev. Met. Paris, 103 1 (2006) 37-42
Published online: 2006-02-22
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Multi-response Optimization of Wire EDM Parameters for AISI 304 SS Using Grey Relational Analysis
A. Saiyathibrahim, S. Seenivasan, R. Premkumar and Dhanesh G. MohanJournal of The Institution of Engineers (India): Series D (2025)
https://doi.org/10.1007/s40033-025-00882-1
Thermal fatigue behavior of 441 ferritic stainless steel in air and synthetic automotive exhaust gas
JianMing Zhan, HongYun Bi and MouCheng LiScience China Technological Sciences 65 (1) 169 (2022)
https://doi.org/10.1007/s11431-021-1865-7
Cyclic plasticity models and fatigue criteria for exhaust manifold life assessment in the context of limited material data available
Josef Košťál, František Šebek, Jindřich Petruška and Thomas SeifertMaterials at High Temperatures 39 (1) 68 (2022)
https://doi.org/10.1080/09603409.2021.2013615
Thermo-cycling fatigue of SiMo ductile iron using a modified thermo-mechanical test
S.N. Lekakh, M. Buchely, R. O'Malley, L. Godlewski and Mei LiInternational Journal of Fatigue 148 106218 (2021)
https://doi.org/10.1016/j.ijfatigue.2021.106218
1 (2020)
https://doi.org/10.4271/2020-01-1166
Effects of Maximum Temperature during Thermal Cycle and Mo Addition on Thermal Fatigue Behavior and Changes in Microstructure of Nb-Added Ferritic Stainless Steel
Chikako Takushima and Jun-ichi HamadaJournal of the Japan Institute of Metals and Materials 83 (11) 424 (2019)
https://doi.org/10.2320/jinstmet.J2019020
Low Cycle Fatigue Behavior of Heat‐Resistant Austenitic Cast Steels at 950 °C
Hailong Zhao, Mei Li, Carlos C. Engler‐Pinto, Larry A. Godlewski, Jacob W. Zindel, Longfei Li and Qiang Fengsteel research international 89 (12) (2018)
https://doi.org/10.1002/srin.201800059
Fatigue Life Prediction of Al319-T7 Subjected to Thermo-Mechanical Loading Conditions
Hong Tae Kang, Yung-Li Lee, Jim Chen and Xiao WuProcedia Engineering 213 730 (2018)
https://doi.org/10.1016/j.proeng.2018.02.069
Assessment of Thermo-Mechanical Fatigue Performance of an Exhaust Manifold through Simulation
N. C. Mahendra Babu, Ananthesha and K. YogeshIndian Journal of Science and Technology 10 (12) 1 (2017)
https://doi.org/10.17485/ijst/2017/v10i12/105559
Change of Microstructure during Thermal Fatigue at Maximum Temperature 1073 K in Nb-Added Ferritic Stainless Steels
Jun-ichi Hamada, Naoki Morihiro and Haruhiko KajimuraJournal of the Japan Institute of Metals 81 (12) 527 (2017)
https://doi.org/10.2320/jinstmet.JC201701
Experimental investigation of the behavior and the low cycle fatigue life of a welded structure
A. Benoit, L. Rémy, A. Köster, H. Maitournam and F. OgerMaterials Science and Engineering: A 595 64 (2014)
https://doi.org/10.1016/j.msea.2013.11.082
Characterization of Gas Metal Arc Welding welds obtained with new high Cr–Mo ferritic stainless steel filler wires
V. Villaret, F. Deschaux-Beaume, C. Bordreuil, et al.Materials & Design 51 474 (2013)
https://doi.org/10.1016/j.matdes.2013.04.054
Influence of filler wire composition on weld microstructures of a 444 ferritic stainless steel grade
V. Villaret, F. Deschaux-Beaume, C. Bordreuil, S. Rouquette and C. ChovetJournal of Materials Processing Technology 213 (9) 1538 (2013)
https://doi.org/10.1016/j.jmatprotec.2013.03.026