EDP Sciences logo
Subscriber Authentication Point
Search
Menu
All issues Rev. Met. Paris, 103 6 (2006) 293-302 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

First-principles investigation of alloying element effects on mechanical properties and corrosion susceptibility of advanced high-strength steels

Yan Cheng, Xian Zhang, Yifan Zheng, Feng Zhou, Xiangliang Wan, Lin Cheng, Jing Liu and Kaiming Wu
Materials Today Communications 46 112569 (2025)
https://doi.org/10.1016/j.mtcomm.2025.112569

Effect of annealing temperature on carbide precipitation, microstructure and mechanical properties of Fe-Mn-C- (Cr, Mo, W, Ni, Nb, Ti, V) multi-alloying TWIP steel

Shihan Li, Xiaolin Wang and Changfeng Chen
Materials Today Communications 39 108895 (2024)
https://doi.org/10.1016/j.mtcomm.2024.108895

Developing austenitic high-manganese high-carbon steels for biodegradable stent applications: Microstructural and mechanical studies

Martin Otto, Jens Freudenberger, Lars Giebeler, Anja Weidner and Julia Hufenbach
Materials Science and Engineering: A 892 145998 (2024)
https://doi.org/10.1016/j.msea.2023.145998

Detwinning Phenomenon and Its Effect on Resulting Twinning Structure of an Austenitic Hadfield Steel

Marina Lukas, Gerald Ressel, Carola Hahn, Sven Eck, Bernhard Sartory, Thomas Titze and Uwe Ossberger
Metallurgical and Materials Transactions A 54 (4) 1286 (2023)
https://doi.org/10.1007/s11661-023-06984-3

Influence of Cold Deformation on Carbide Precipitation Kinetics in a Fe-22Mn-0.45C TWIP Steel

Javier Escobar, José Luis Jiménez, Alfredo Artigas, Juan Perez-Ipiña and Alberto Monsalve
Materials 15 (11) 3748 (2022)
https://doi.org/10.3390/ma15113748

Temperature and stress dependent twinning behavior in a fully austenitic medium-Mn steel

D.J. Magagnosc, D.M. Field, C.S. Meredith, K. An, T.R. Walter, K.R. Limmer and J.T. Lloyd
Acta Materialia 231 117864 (2022)
https://doi.org/10.1016/j.actamat.2022.117864

A review on physical vapor deposition-based metallic coatings on steel as an alternative to conventional galvanized coatings

Atasi Dan, Pavan Kumar Bijalwan, Abhishek Subhas Pathak and Amar Nath Bhagat
Journal of Coatings Technology and Research 19 (2) 403 (2022)
https://doi.org/10.1007/s11998-021-00564-z

Unveiling nonmonotonic chemical trends in the solubility of H in complex Fe-Cr-Mn carbides by means of ab initio based approaches

Lekshmi Sreekala, Poulumi Dey, Tilmann Hickel and Jörg Neugebauer
Physical Review Materials 6 (1) (2022)
https://doi.org/10.1103/PhysRevMaterials.6.014403

Effect of silver in thermal treatments of Fe-Mn-C degradable metals: Implications for stent processing

Sergio Loffredo, Sofia Gambaro, Francesco Copes, et al.
Bioactive Materials 12 30 (2022)
https://doi.org/10.1016/j.bioactmat.2021.10.020

On the role of the stacking fault energy in the beneficial effect of aluminium on the hydrogen embrittlement sensitivity of twinning-induced plasticity (TWIP) steel

L. Claeys, T. Depover and K. Verbeken
Materials Science and Engineering: A 855 143873 (2022)
https://doi.org/10.1016/j.msea.2022.143873

Thermophysical Properties of Fe30Mn4Al0.9C: A Coupled Computational-Experimental Approach

Manuel E. Umanzor, Matthew E. Drew and Alan P. Druschitz
International Journal of Metalcasting 16 (2) 521 (2022)
https://doi.org/10.1007/s40962-021-00624-5

Superior strength and ductility in a low density duplex steel studied by in situ neutron diffraction

Daniel J. Magagnosc, Daniel M. Field, Christopher S. Meredith, Timothy R. Walter, Krista R. Limmer and Jeffrey T. Lloyd
Materials Science and Engineering: A 799 140252 (2021)
https://doi.org/10.1016/j.msea.2020.140252

Irradiation-induced segregation/desegregation at grain boundaries of a ferritic Fe-Mn-Si steel

Qi Chen, Rong Hu, Shenbao Jin, Fei Xue and Gang Sha
Acta Materialia 220 117297 (2021)
https://doi.org/10.1016/j.actamat.2021.117297

Effect of ‘genetic’ rare earth on alloy dissolution behavior in micro-alloyed steel

Guomin Wei, Minghe Li, Qi Fang, Wei Sun and Zili Jin
Materials Research Express 8 (5) 056511 (2021)
https://doi.org/10.1088/2053-1591/abe566

Simulation of Carbo‐Nitride Precipitation in the Multi‐Phase Microstructure of Micro‐Alloyed Transformation‐Induced Plasticity Steel

Philipp Retzl, Walter Mayer, Daniel Krizan and Ernst Kozeschnik
steel research international 92 (1) (2021)
https://doi.org/10.1002/srin.202000197

Effects of NiAl Precipitation on the Stability of Retained Austenite and Mechanical Properties of a Quenching-partitioning-tempering Treated Medium-manganese Steel

Huibin Liu, Yuantao Xu, Wei Li, Na Min and Xuejun Jin
ISIJ International 61 (1) 387 (2021)
https://doi.org/10.2355/isijinternational.ISIJINT-2020-185

Effect of Cr/Mo carbides on corrosion behaviour of Fe_Mn_C twinning induced plasticity steel

Hongxia Wan, Yong Cai, Dongdong Song and Changfeng Chen
Corrosion Science 167 108518 (2020)
https://doi.org/10.1016/j.corsci.2020.108518

Effect of carbon on microstructure and mechanical properties of Fe36Mn36Ni9Cr9Al10 high-entropy alloys

Li Bai, Yuzhe Wang, Yi Yan, Xiaoyang Li, Yukun Lv and Jian Chen
Materials Science and Technology 36 (17) 1851 (2020)
https://doi.org/10.1080/02670836.2020.1839194

Thermo-mechanical-microstructural simulation of double-pass welding process in a TWIP steel by FE formulation and probabilistic model

V. García-García, I. Mejía, F. Reyes-Calderón and H. Hernández-Belmontes
The International Journal of Advanced Manufacturing Technology 111 (3-4) 1115 (2020)
https://doi.org/10.1007/s00170-020-06118-8

Study on corrosion behavior of TWIP steel and properties of surface electroless Ni-P coatings

Minghui Yang, Lijie Yue, Kun Xie, et al.
Materials Research Express 7 (3) 036517 (2020)
https://doi.org/10.1088/2053-1591/ab7d0a

Influence of high cycle fatigue damage on uniaxial tensile and notch tensile behavior of C–Mn steel

Puja Ghosal and Surajit Kumar Paul
Materials Research Express 6 (12) 126596 (2019)
https://doi.org/10.1088/2053-1591/ab5ac6

Two-dimensional Monte Carlo–Voronoi simulation of grain growth and nucleation in the heat affected zone of TWIP-Ti welds

V. García-García, I. Mejía and F. Reyes-Calderón
Materialia 5 100223 (2019)
https://doi.org/10.1016/j.mtla.2019.100223

Effects of solute segregation on tensile properties and serration behavior in ultra-high-strength high-Mn TRIP steels

Min Chul Jo, Jin Hyeok Choi, Hyungsoo Lee, et al.
Materials Science and Engineering: A 740-741 16 (2019)
https://doi.org/10.1016/j.msea.2018.10.065

Ferromagnetic ε-Fe2MnN: High-Pressure Synthesis, Hardness and Magnetic Properties

Ulrich Schwarz, Kai Guo, William P. Clark, et al.
Materials 12 (12) 1993 (2019)
https://doi.org/10.3390/ma12121993

Diffusion model for austenite formation kinetics during inter-critical annealing of dual-phase steels

P Chantrenne, M Perez, M Ollat, et al.
Modelling and Simulation in Materials Science and Engineering 27 (6) 065007 (2019)
https://doi.org/10.1088/1361-651X/ab202b

Austenite Grain Growth in High Manganese Steels

Madhumanti Bhattacharyya, Yves Brechet, Gary R. Purdy and Hatem S. Zurob
Metallurgical and Materials Transactions A 50 (12) 5760 (2019)
https://doi.org/10.1007/s11661-019-05460-1

On the Grain Growth Kinetics of a Low Density Steel

Daniel M. Field, Krista R. Limmer and Billy C. Hornbuckle
Metals 9 (9) 997 (2019)
https://doi.org/10.3390/met9090997

Generalized stacking fault energy of carbon-alloyed paramagnetic $ \gamma $ -Fe

Ruiwen Xie, Wei Li, Song Lu, Yan Song and Levente Vitos
Journal of Physics: Condensed Matter 31 (6) 065703 (2019)
https://doi.org/10.1088/1361-648X/aaf2fa

Ab Initio Study of Elastic and Mechanical Properties in FeCrMn Alloys

Vsevolod I. Razumovskiy, Carola Hahn, Marina Lukas and Lorenz Romaner
Materials 12 (7) 1129 (2019)
https://doi.org/10.3390/ma12071129

High-strain-rate deformation behaviour of new high-Mn austenitic steel during impact shock-loading

M. Eskandari, M. A. Mohtadi-Bonab, M. Yeganeh, J. A. Szpunar and A. G. Odeshi
Materials Science and Technology 35 (1) 77 (2019)
https://doi.org/10.1080/02670836.2018.1540507

On the Mn–C Short-Range Ordering in a High-Strength High-Ductility Steel: Small Angle Neutron Scattering and Ab Initio Investigation

Wenwen Song, Dimitri Bogdanovski, Ahmet Yildiz, et al.
Metals 8 (1) 44 (2018)
https://doi.org/10.3390/met8010044

Novel medium-Mn (austenite + martensite) duplex hot-rolled steel achieving 1.6 GPa strength with 20 % ductility by Mn-segregation-induced TRIP mechanism

Hyungsoo Lee, Min Chul Jo, Seok Su Sohn, et al.
Acta Materialia 147 247 (2018)
https://doi.org/10.1016/j.actamat.2018.01.033

Hierarchical microstructure design of a bimodal grained twinning-induced plasticity steel with excellent cryogenic mechanical properties

Yu Li, Yufei Lu, Wei Li, et al.
Acta Materialia 158 79 (2018)
https://doi.org/10.1016/j.actamat.2018.06.019

Influence of original austenite grain size on tensile properties of a high-manganese transformation-induced plasticity (TRIP) steel

Xing Li, Liqing Chen, Yang Zhao, Xiaoyun Yuan and Raja Devesh Kumar Misra
Materials Science and Engineering: A 715 257 (2018)
https://doi.org/10.1016/j.msea.2017.12.107

Exceptional combination of ultra-high strength and excellent ductility by inevitably generated Mn-segregation in austenitic steel

Min Chul Jo, Hyungsoo Lee, A. Zargaran, et al.
Materials Science and Engineering: A 737 69 (2018)
https://doi.org/10.1016/j.msea.2018.09.024

Un estudio adicional de la cinética de recristalización y crecimiento de grano del acero twip laminado en frío

Fernando De las Cuevas, Claudio Aguilar and Javier Gil Sevillano
Revista de Metalurgia 54 (4) 131 (2018)
https://doi.org/10.3989/revmetalm.131

EBSD Study of Deformation Microstructure of an As‐Homogenized Austenitic Mn Steel after Hot Compression

Mostafa Eskandari, Mohammad Ali Mohtadi‐Bonab, Abbas Zarei‐Hanzaki, Jerzy A. Szpunar and L. Pentti Karjalainen
Advanced Engineering Materials 20 (10) (2018)
https://doi.org/10.1002/adem.201800327

Pearlite Development in Commercial Hadfield Steel by Means of Isothermal Reactions

M. Martín, M. Raposo, O. Prat, M. F. Giordana and J. Malarría
Metallography, Microstructure, and Analysis 6 (6) 591 (2017)
https://doi.org/10.1007/s13632-017-0391-4

Study on High-Temperature Mechanical Properties of Low-Carbon Fe-Mn-Si-Al TWIP Steel

Shiqi Li, Jianhua Liu, Hongbo Liu, et al.
High Temperature Materials and Processes 36 (5) 505 (2017)
https://doi.org/10.1515/htmp-2015-0144

Aging of a Fe-Mn-Al Steel Using Plasma Nitrocarburizing

G. S. Takeya, F. E. Mariani, L. C. Casteletti, A. N. Lombardi and G. E. Totten
Materials Performance and Characterization 6 (4) 554 (2017)
https://doi.org/10.1520/MPC20160094

First-principles study of phosphorus embrittlement in austenitic steels with κ-carbide precipitates

N.I. Medvedeva, D.C. Van Aken and J.E. Medvedeva
Computational Materials Science 138 105 (2017)
https://doi.org/10.1016/j.commatsci.2017.06.027

Twinning and dynamic strain aging behavior during tensile deformation of Fe-Mn-C TWIP steel

Peng Lan and Jiaquan Zhang
Materials Science and Engineering: A 700 250 (2017)
https://doi.org/10.1016/j.msea.2017.06.012

Mechanical Behavior and Microstructure Characteristics of Directionally Solidified TWIP Steel

Dan Wang, Kun Wang, Jianfeng Man, Jianzhong Yang and Fusheng Han
Metallurgical and Materials Transactions A 47 (7) 3423 (2016)
https://doi.org/10.1007/s11661-016-3485-8

Solidification Microstructure, Segregation, and Shrinkage of Fe-Mn-C Twinning-Induced Plasticity Steel by Simulation and Experiment

Peng Lan, Haiyan Tang and Jiaquan Zhang
Metallurgical and Materials Transactions A 47 (6) 2964 (2016)
https://doi.org/10.1007/s11661-016-3445-3

High-Resolution EBSD Study of Adiabatic Shear Band and Neighboring Grains After Dynamic Impact Loading of Mn-Steel Used in Vehicle Structure

M. Eskandari, M. A. Mohtadi-Bonab, A. Zarei-Hanzaki, A. G. Odeshi and J. A. Szpunar
Journal of Materials Engineering and Performance 25 (4) 1611 (2016)
https://doi.org/10.1007/s11665-016-1923-9

Effect of Ti Microaddition on Cavitation Behavior During Uniaxial Hot-Tensile of Fe-22Mn-1.5Al-1.3Si-0.5C Austenitic TWIP Steel

Antonio E. Salas-Reyes, Ignacio Mejía and José M. Cabrera
MRS Proceedings 1812 123 (2016)
https://doi.org/10.1557/opl.2016.28

Effects of Aluminum on Hydrogen Solubility and Diffusion in Deformed Fe-Mn Alloys

C. Hüter, S. Dang, X. Zhang, A. Glensk and R. Spatschek
Advances in Materials Science and Engineering 2016 1 (2016)
https://doi.org/10.1155/2016/4287186

Study of Dislocation Substructures in High-Mn Steels after Dynamic Deformation Tests

A. Śmiglewicz, W. Moćko, K. Rodak, I. Bednarczyk and M.B. Jabłońska
Acta Physica Polonica A 130 (4) 942 (2016)
https://doi.org/10.12693/APhysPolA.130.942

Modelling of Static Recrystallization Behavior of High Manganese Austenitic Steels with Different Alloying Contents

Laura Llanos, Beatriz Pereda, Beatriz López and Jose Maria Rodriguez-Ibabe
ISIJ International 56 (6) 1038 (2016)
https://doi.org/10.2355/isijinternational.ISIJINT-2015-733

Thermophysical Properties and Solidification Defects of Fe-22Mn-0.7C TWIP Steel

Peng Lan and Jiaquan Zhang
steel research international 87 (2) 250 (2016)
https://doi.org/10.1002/srin.201500022

Interaction Between Recovery, Recrystallization, and NbC Strain-Induced Precipitation in High-Mn Steels

Laura Llanos, Beatriz Pereda and Beatriz López
Metallurgical and Materials Transactions A 46 (11) 5248 (2015)
https://doi.org/10.1007/s11661-015-3066-2

A Neutron Diffraction Study of Texture Evolution under Deformation in a Hot Rolled TWIP Steel

Saurabh Kabra, Silene Danion, Winfried Kockelmann and Shu Yan Zhang
Materials Today: Proceedings 2 S261 (2015)
https://doi.org/10.1016/j.matpr.2015.05.036

Grain boundary segregation in Fe–Mn–C twinning-induced plasticity steels studied by correlative electron backscatter diffraction and atom probe tomography

M. Herbig, M. Kuzmina, C. Haase, et al.
Acta Materialia 83 37 (2015)
https://doi.org/10.1016/j.actamat.2014.09.041

Microstructure and texture evolution in 21Mn–2.5Si–1.6Al–Ti steel subjected to dynamic impact loading

M. Eskandari, A. Zarei-Hazanki, M.A. Mohtadi-Bonab, A.G. Odeshi and J.A. Szpunar
Materials Science and Engineering: A 622 160 (2015)
https://doi.org/10.1016/j.msea.2014.11.017

From High‐Entropy Alloys to High‐Entropy Steels

Dierk Raabe, Cemal Cem Tasan, Hauke Springer and Michael Bausch
steel research international 86 (10) 1127 (2015)
https://doi.org/10.1002/srin.201500133

Effect of Ti and B microadditions on the hot ductility behavior of a High-Mn austenitic Fe–23Mn–1.5Al–1.3Si–0.5C TWIP steel

I. Mejía, A.E. Salas-Reyes, J. Calvo and J.M. Cabrera
Materials Science and Engineering: A 648 311 (2015)
https://doi.org/10.1016/j.msea.2015.09.079

Microstructural Evolution in Fe-22Mn-0.4C Twinning-Induced Plasticity Steel During High Strain Rate Deformation

Yumi Ha, Hyunmin Kim, Ki Hyuk Kwon, et al.
Metallurgical and Materials Transactions A 46 (2) 545 (2015)
https://doi.org/10.1007/s11661-014-2705-3

On the Oxidation Resistance of Alloy 800HT Exposed in Supercritical Water (SCW)

S. Mahboubi, G.A. Botton and J.R. Kish
Corrosion 71 (8) 992 (2015)
https://doi.org/10.5006/1677

Application of Quenching and Partitioning Processing to Medium Mn Steel

Eun Jung Seo, Lawrence Cho and Bruno C. De Cooman
Metallurgical and Materials Transactions A 46 (1) 27 (2015)
https://doi.org/10.1007/s11661-014-2657-7

Effects of rare earth addition on microstructure and mechanical properties of a Fe–15Mn–1.5Al–0.6C TWIP steel

Yangyang Zhao, Junfeng Wang, Shu Zhou and Xiaodong Wang
Materials Science and Engineering: A 608 106 (2014)
https://doi.org/10.1016/j.msea.2014.04.084

Comparison of Semi-empirical and Dislocation Density based Material Equations for Fast Modeling of Multistage Hot Working of Steel

Johannes Lohmar, Markus Bambach and Gerhard Hirt
Procedia Engineering 81 268 (2014)
https://doi.org/10.1016/j.proeng.2014.09.162

Hydrogen Embrittlement in Al-Added Twinning-Induced Plasticity Steels Evaluated by Tensile Tests during Hydrogen Charging

Motomichi Koyama, Eiji Akiyama and Kaneaki Tsuzaki
Tetsu-to-Hagane 100 (5) 662 (2014)
https://doi.org/10.2355/tetsutohagane.100.662

Strain Hardening During Hot Compression Through Planar Dislocation and Twin-Like Structure in a Low-Density High-Mn Steel

M. Eskandari, A. Zarei-Hanzaki, A. R. Kamali, M. A. Mohtadi-Bonab and J. A. Szpunar
Journal of Materials Engineering and Performance 23 (10) 3567 (2014)
https://doi.org/10.1007/s11665-014-1168-4

First principles study on interstitial C and substitutional Mn in bcc iron: structural stability and elastic properties

B. Kou, Z. Kou, Y. Liu and P. Han
Materials Research Innovations 18 (sup2) S2-775 (2014)
https://doi.org/10.1179/1432891714Z.000000000548

Structural studies with the use of XRD and Mössbauer spectroscopy of new high Manganese steels

Magdalena Barbara Jablonska
Hyperfine Interactions 226 (1-3) 781 (2014)
https://doi.org/10.1007/s10751-013-0940-4

Role of copper and aluminum on the corrosion behavior of austenitic Fe–Mn–C TWIP steels in aqueous solutions and the related hydrogen absorption

T. Dieudonné, L. Marchetti, M. Wery, et al.
Corrosion Science 83 234 (2014)
https://doi.org/10.1016/j.corsci.2014.02.018

Coupling of Crystal Plasticity Finite Element and Phase Field Methods for the Prediction of SRX Kinetics after Hot Working

Onur Güvenç, Markus Bambach and Gerhard Hirt
steel research international 85 (6) 999 (2014)
https://doi.org/10.1002/srin.201300191

International Multidisciplinary Microscopy Congress

Magdalena Barbara Jabłońska
Springer Proceedings in Physics, International Multidisciplinary Microscopy Congress 154 113 (2014)
https://doi.org/10.1007/978-3-319-04639-6_16

Role of copper and aluminum additions on the hydrogen embrittlement susceptibility of austenitic Fe–Mn–C TWIP steels

T. Dieudonné, L. Marchetti, M. Wery, et al.
Corrosion Science 82 218 (2014)
https://doi.org/10.1016/j.corsci.2014.01.022

Microstructure evolution and mechanical behavior of a new microalloyed high Mn austenitic steel during compressive deformation

M. Eskandari, A. Zarei-Hanzaki, J.A. Szpunar, et al.
Materials Science and Engineering: A 615 424 (2014)
https://doi.org/10.1016/j.msea.2014.07.084

Effect of microalloying elements (Nb, V and Ti) on the hot flow behavior of high-Mn austenitic twinning induced plasticity (TWIP) steel

F. Reyes-Calderón, I. Mejía, A. Boulaajaj and J.M. Cabrera
Materials Science and Engineering: A 560 552 (2013)
https://doi.org/10.1016/j.msea.2012.09.101

TEM investigation of the formation mechanism of deformation twins in Fe–Mn–Si–Al TWIP steels

H. Idrissi, K. Renard, D. Schryvers and P.J. Jacques
Philosophical Magazine 93 (35) 4378 (2013)
https://doi.org/10.1080/14786435.2013.832837

Microstructural Development and Deformation Mechanisms during Cold Rolling of a Medium Stacking Fault Energy TWIP Steel

K.A. Ofei, L. Zhao and J. Sietsma
Journal of Materials Science & Technology 29 (2) 161 (2013)
https://doi.org/10.1016/j.jmst.2012.11.002

Hydrogen-assisted failure in a twinning-induced plasticity steel studied under in situ hydrogen charging by electron channeling contrast imaging

Motomichi Koyama, Eiji Akiyama, Kaneaki Tsuzaki and Dierk Raabe
Acta Materialia 61 (12) 4607 (2013)
https://doi.org/10.1016/j.actamat.2013.04.030

On the Austenite Stability of a New Quality of Twinning Induced Plasticity Steel, Exploring New Ranges of Mn and C

Rafael Agnelli Mesquita, Reinhold Schneider, Katharina Steineder, Ludovic Samek and Enno Arenholz
Metallurgical and Materials Transactions A 44 (9) 4015 (2013)
https://doi.org/10.1007/s11661-013-1741-8

EBSD Observations of Recrystallisation and Tensile Deformation in Twinning Induced Plasticity Steel

Ahmed A. Saleh, Azdiar A. Gazder and Elena V. Pereloma
Transactions of the Indian Institute of Metals 66 (5-6) 621 (2013)
https://doi.org/10.1007/s12666-013-0300-8

Martensite Formation and Recrystallization Behavior in 17Mn0.06C2Si3Al1Ni TRIP/TWIP Steel after Hot and Cold Rolling

Sara Silva Ferreira de Dafé, Débora Rezende Moreira, Mariana de Souza Matoso, Berenice Mendonça Gonzalez and Dagoberto Brandão Santos
Materials Science Forum 753 185 (2013)
https://doi.org/10.4028/www.scientific.net/MSF.753.185

Effect of Finishing Rolling Temperature on Microstructure and Mechanical Properties of Microalloyed Trip Steels

Zhen-li Mi, Hai-tao Jiang, Zhi-chao Li, Mei-fang Chen and Zhi-gang Wang
Journal of Iron and Steel Research International 20 (10) 75 (2013)
https://doi.org/10.1016/S1006-706X(13)60180-6

Effect of cooling rate on (ε, α') martensite formation in twinning/transformation-induced plasticity Fe-17Mn-0.06C steel

Sara Silva Ferreira de Dafé, Felipe Lucas Sicupira, Flávia Cristina Silva Matos, et al.
Materials Research 16 (6) 1229 (2013)
https://doi.org/10.1590/S1516-14392013005000129

Performance and Characterization of TWIP Steels for Automotive Applications

R. W. Neu
Materials Performance and Characterization 2 (1) 244 (2013)
https://doi.org/10.1520/MPC20130009

Study on Cyclic Strain Localization and Fatigue Fracture Mechanism in High Manganese Twinning-Induced Plasticity Steels

Atef S. Hamada, David A. Porter, Jarkko Puustinen and L. Pentti Karjalainen
Materials Science Forum 762 411 (2013)
https://doi.org/10.4028/www.scientific.net/MSF.762.411