EDP Sciences logo
Subscriber Authentication Point
Search
Menu
All issues Rev. Met. Paris, 103 4 (2006) 174-179 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Study on Transverse Surface Cracks in the Continuous Casting Slab of a Microalloyed Steel

Yadong Wang and Lifeng Zhang
steel research international (2025)
https://doi.org/10.1002/srin.202400988

Experiment and analysis on edge chamfering rolling of sheet with various wedge angles

Fangkun Ning, Qinghao Shi, Shuping Kong, Weitao Jia and Lifeng Ma
Materials Chemistry and Physics 313 128699 (2024)
https://doi.org/10.1016/j.matchemphys.2023.128699

Formation Mechanism and Control Technology of Transverse Corner Cracks During Slab Continuous Casting of Microalloyed Steels

Miaoyong Zhu and Zhaozhen Cai
steel research international 94 (12) (2023)
https://doi.org/10.1002/srin.202300119

Formation and Control of Transverse Corner Cracks in the Continuous Casting Slab of a Microalloyed Steel

Yadong Wang, Qiang Ren, Lifeng Zhang, Xiaogang Yang, Wen Yang, Ying Ren and Haijie Zhang
steel research international 92 (6) (2021)
https://doi.org/10.1002/srin.202000649

Irreversible loss of hot ductility following simulated primary cooling of a C–Mn steel to temperatures above the ferrite transformation temperature

K.M. Lekganyane, R.J. Mostert, C.W. Siyasiya and K.M. Banks
Materials Science and Engineering: A 810 141007 (2021)
https://doi.org/10.1016/j.msea.2021.141007

Effect of Different Thermal Schedules on Ductility of Microalloyed Steel Slabs during Continuous Casting

Liu Yang, Yang Li, Zhengliang Xue and Changgui Cheng
Metals 9 (1) 37 (2019)
https://doi.org/10.3390/met9010037

Mold Simulator Study on the Initial Solidification of Molten Steel Near the Corner of Continuous Casting Mold

Peisheng Lyu, Wanlin Wang and Haihui Zhang
Metallurgical and Materials Transactions B 48 (1) 247 (2017)
https://doi.org/10.1007/s11663-016-0853-0

Hot ductility trough elimination through single cycle of intense cooling and reheating for microalloyed steel casting

C. Du, J. Zhang, J. Wen, Y. Li and P. Lan
Ironmaking & Steelmaking 43 (5) 331 (2016)
https://doi.org/10.1179/1743281215Y.0000000044

Production of high-quality slabs during continuous casting of cracking-sensitive steel: Part 2

V. A. Sinel’nikov and G. A. Filippov
Russian Metallurgy (Metally) 2014 (12) 956 (2014)
https://doi.org/10.1134/S0036029514120131

Effect of Cooling Rates on the Second‐Phase Precipitation and Proeutectoid Phase Transformation of a Nb–Ti Microalloyed Steel Slab

Fanjun Ma, Guanghua Wen and Wanlin Wang
steel research international 84 (4) 370 (2013)
https://doi.org/10.1002/srin.201200161

High-Temperature Mechanical Behavior and Fracture Analysis of a Low-Carbon Steel Related to Cracking

Begoña Santillana, Rob Boom, Dmitry Eskin, et al.
Metallurgical and Materials Transactions A 43 (13) 5048 (2012)
https://doi.org/10.1007/s11661-012-1331-1

Prevention of transverse corner cracks in continuously cast steel slabs using asymmetric secondary cooling nozzle

Y J Lu, Q Wang, Y G Li, et al.
Ironmaking & Steelmaking 38 (8) 561 (2011)
https://doi.org/10.1179/1743281211Y.0000000039

Effect of Cooling Rate on the Precipitation Behavior of Carbonitride in Microalloyed Steel Slab

Fanjun Ma, Guanghua Wen, Ping Tang, et al.
Metallurgical and Materials Transactions B 42 (1) 81 (2011)
https://doi.org/10.1007/s11663-010-9454-5

In situobservation and investigation of effect of cooling rate on slab surface microstructure evolution in microalloyed steel

F. J. Ma, G. H. Wen, P. Tang, et al.
Ironmaking & Steelmaking 37 (3) 211 (2010)
https://doi.org/10.1179/030192309X12595763237085