The new 200-series: an alternative answer to Ni surcharge? Risks or opportunities?
Rev. Met. Paris, 104 6 (2007) 308-317
Published online: 2007-06-12
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Study of strain induced martensite and its reversal on sensitization behaviour of metastable austenitic stainless steel
Devashish Vikas Wanjari, Awanikumar P. Patil, Sushil Kumar Singh, Inayat Ullah and Sourabh ShuklaAnti-Corrosion Methods and Materials 69 (5) 561 (2022)
https://doi.org/10.1108/ACMM-12-2021-2581
Creep and Hot Tensile Behavior of AISI 201LN Austenitic Stainless Steel
Gustavo Henrique Pelissari, Diogo Pedrino Braga, Pedro Henrique Fernandes Oliveira, et al.Metallurgical and Materials Transactions A 52 (10) 4413 (2021)
https://doi.org/10.1007/s11661-021-06394-3
High-Performance Ferrous Alloys
David San-Martin, Carola Celada-Casero, Javier Vivas and Carlos CapdevilaHigh-Performance Ferrous Alloys 459 (2021)
https://doi.org/10.1007/978-3-030-53825-5_11
Influence of Cu on the microstructure and corrosion resistance of cold-rolled type 204 stainless steels
Xiaohong Liu, Lele Liu, Fengli Sui, et al.Journal of Solid State Electrochemistry 24 (5) 1197 (2020)
https://doi.org/10.1007/s10008-020-04614-1
Mechanical properties of cold-rolled metastable Cr–Mn–Ni–N austenitic stainless steel at low ambient temperature
Yichong Zhang, Moucheng Li, Hongyun Bi, et al.Materials Science and Engineering: A 759 224 (2019)
https://doi.org/10.1016/j.msea.2019.05.045
The Intergranular Corrosion Susceptibility of Metastable Austenitic Cr–Mn–Ni–N–Cu High-Strength Stainless Steel under Various Heat Treatments
Guangming Liu, Yuanyuan Liu, Yawen Cheng, Jin Li and Yiming JiangMaterials 12 (9) 1385 (2019)
https://doi.org/10.3390/ma12091385
Effects of different backing gases on 2404 duplex stainless steel welds
B Varbai, I Mészáros and K MájlingerIOP Conference Series: Materials Science and Engineering 426 012051 (2018)
https://doi.org/10.1088/1757-899X/426/1/012051
Martensite transformation behavior and mechanical properties of cold-rolled metastable Cr-Mn-Ni-N austenitic stainless steels
Yichong Zhang, Moucheng Li, Hongyun Bi, et al.Materials Science and Engineering: A 724 411 (2018)
https://doi.org/10.1016/j.msea.2018.03.113
TIG and MIG welding of high strength Cr-Mn and Cr-Ni alloyed austenitic stainless steel combinations
E Kalácska, B Varbai, J Ginsztler and K MájlingerIOP Conference Series: Materials Science and Engineering 426 012021 (2018)
https://doi.org/10.1088/1757-899X/426/1/012021
A Comparative Study of Intergranular Corrosion of AISI 304 Stainless Steel and Chrome-Manganese Austenitic Stainless Steel
Ravindra V. Taiwade, Awanikumar P. Patil, Suhas J. Patre and Ravin K. DayalISIJ International 52 (10) 1879 (2012)
https://doi.org/10.2355/isijinternational.52.1879
Laser Beam Weldability of High-Manganese Austenitic and Duplex Stainless Steel Sheets
Vanessa Quiroz, Andrey Gumenyuk and Michael RethmeierWelding in the World 56 (1-2) 9 (2012)
https://doi.org/10.1007/BF03321140
Literature Review of Commercially Available Alloys That Have Potential as Low-Cost, Corrosion-Resistant Concrete Reinforcement
F. Presuel-Moreno, J.R. Scully and S.R. SharpCorrosion 66 (8) 086001-1 (2010)
https://doi.org/10.5006/1.3479955