Duplex stainless steels, a review after DSS'07 in Grado
Rev. Met. Paris, 105 3 (2008) 155-171
Published online: 2008-04-09
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Microstructural Evolution of UNS S32205 Duplex Stainless Steel During Cold Rolling and Subsequent Annealing
C. Gauss, M.J.R. Sandim and H.R.Z. SandimMaterials Research 28 (2025)
https://doi.org/10.1590/1980-5373-mr-2024-0276
A Comprehensive Material Model for the Super-Duplex Stainless Steel SAF2507 in a Welding Environment
Maximilian Prunbauer, Peter Raninger, Werner Ecker, Martin Rester and Reinhold EbnerMetals 14 (2) 153 (2024)
https://doi.org/10.3390/met14020153
Wear Behaviors of the Surface of Duplex Cast Steel after the Burnishing Process
Grzegorz Stradomski, Joanna Fik, Zbigniew Lis, Dariusz Rydz and Arkadiusz SzarekMaterials 17 (8) 1914 (2024)
https://doi.org/10.3390/ma17081914
Measurement of G-phase volume fraction and number density in duplex stainless steels using transmission electron microscopy
Isak McGieson, Jonathan D. Poplawsky, Melissa K. Santala and Julie D. TuckerMaterials Today Communications 38 107926 (2024)
https://doi.org/10.1016/j.mtcomm.2023.107926
A coupled computational fluid dynamics approach as a viable tool for thermal history assessment of UNS S32205 duplex stainless steels friction stir welded joints
Guilherme Gadelha de Sousa Figueiredo, Igor Jordão Marques, Lucas Oliveira Siqueira, et al.Welding in the World 67 (2) 353 (2023)
https://doi.org/10.1007/s40194-022-01416-z
Effect of Temperature on Resistance to Pitting Corrosion in Duplex Stainless Steel 2205 Welds
Y. Martinez-Galvan, L. Dzib-Perez, M. Garcia-Renteria, O. Bilyy, V. Lopez-Morelos and J. Gonzalez-SanchezMaterials Science 58 (6) 755 (2023)
https://doi.org/10.1007/s11003-023-00726-x
Dynamic Recrystallization and Phase-Specific Corrosion Performance in a Super Duplex Stainless Steel
Riya Mondal, Sunil Kumar Bonagani, Parvej Raut, et al.Journal of Materials Engineering and Performance 31 (2) 1478 (2022)
https://doi.org/10.1007/s11665-021-06221-1
Mechanical Properties Study of a Duplex Stainless Steel Weld Using Physical Simulation and Work Hardening Models
Gabriela Aksascki Caetano, Tiago Bristt Gonoring, Lucas Mirandola Coelho, et al.Journal of Materials Engineering and Performance 31 (1) 113 (2022)
https://doi.org/10.1007/s11665-021-06155-8
The Designation Degree of Tool Wear after Machining of the Surface Layer of Duplex Stainless Steel
Tomasz DylMaterials 14 (21) 6425 (2021)
https://doi.org/10.3390/ma14216425
Slurry Erosion Behavior of Cast 25 Cr Austenitic-Ferritic Steel with Niobium Addition for Subsea Pipelines
Vivek Gaurav, SankaraRaman Sankaranarayanan, S. P. Kumareshbabu and A. VallimanalanJournal of Materials Engineering and Performance 30 (8) 6224 (2021)
https://doi.org/10.1007/s11665-021-05845-7
Laser Powder Bed Fusion and Heat Treatment of an AlCrFe2Ni2 High Entropy Alloy
Dimitrios Vogiatzief, Alper Evirgen, Sergej Gein, et al.Frontiers in Materials 7 (2020)
https://doi.org/10.3389/fmats.2020.00248
Effect of cold rolling and annealing on microstructure and properties of a new resource-saving duplex stainless steel Fe–19Cr–0.6Al–12Mn
Ming-ming Pan, Xiao-ming Zhang, Yong Chen, Xiang-bin Su and Peng ChenJournal of Iron and Steel Research International 27 (12) 1420 (2020)
https://doi.org/10.1007/s42243-020-00438-5
Optimization study and wear behavior of 25 Cr- 8 Ni- 4 Mo -N cast 5A duplex stainless steel
Vivek Gaurav, Sankara Raman Sankaranarayanan, S.P. Kumaresh Babu and A. VallimanalanMaterials Today: Proceedings 27 2429 (2020)
https://doi.org/10.1016/j.matpr.2019.09.210
Role of Recovery and Recrystallization on the Post Cold Work Corrosion Performance in a Super Duplex Stainless Steel
Riya Mondal, Sunil Kumar Bonagani, Parvej Raut, et al.Journal of The Electrochemical Society 167 (10) 101501 (2020)
https://doi.org/10.1149/1945-7111/ab95ca
20 (2019)
https://doi.org/10.5151/wcacem-04
Use of composition profiles near sigma phase for assessment of localized corrosion resistance in a duplex stainless steel
Rodrigo Magnabosco, Luara da Costa Morais and Daniella Caluscio dos SantosCalphad 64 126 (2019)
https://doi.org/10.1016/j.calphad.2018.12.004
Thermal modeling and characterization of wire arc additive manufactured duplex stainless steel
Fatemeh Hejripour, Farrokh Binesh, Mark Hebel and Daryush K. AidunJournal of Materials Processing Technology 272 58 (2019)
https://doi.org/10.1016/j.jmatprotec.2019.05.003
Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors
David A. Garfinkel, Jonathan D. Poplawsky, Wei Guo, George A. Young and Julie D. TuckerThe Minerals, Metals & Materials Series, Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors 2399 (2019)
https://doi.org/10.1007/978-3-030-04639-2_161
Microstructural Evolution Due to One Thermal Cycle in a Superduplex Stainless Steel ASTM A890/A890M - Grade 6A in the As-Weld and Post-Weld Heat Treatment Conditions
Clélia Ribeiro de Oliveira, Eloá Lopes Maia, Solange Tamara da Fonseca, et al.Materials Research 22 (4) (2019)
https://doi.org/10.1590/1980-5373-mr-2019-0320
Effect of Short-Time Aging on the Pitting Corrosion Behavior of a Novel Lean Duplex Stainless Steel 2002
Tian-Yi Sun, Yan-Jun Guo, Yi-Ming Jiang and Jin LiActa Metallurgica Sinica (English Letters) 32 (6) 755 (2019)
https://doi.org/10.1007/s40195-018-0829-y
Neural network implementation for the prediction of secondary phase precipitation and mechanical feature in a duplex stainless steel
Gabriele Baiocco and Nadia UcciardelloApplied Physics A 125 (1) (2019)
https://doi.org/10.1007/s00339-018-2312-z
Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors
David A. Garfinkel, Jonathan D. Poplawsky, Wei Guo, George A. Young and Julie D. TuckerThe Minerals, Metals & Materials Series, Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors 1183 (2018)
https://doi.org/10.1007/978-3-319-68454-3_85
Corrosion Behavior Difference in Initial Period for Hot-Rolled and Cold-Rolled 2205 Duplex Stainless Steels
Tao Gao, Jian Wang, Qi Sun and Peide HanMetals 8 (6) 407 (2018)
https://doi.org/10.3390/met8060407
The Kinetic diagram of sigma phase and its precipitation hardening effect on 15Cr-2Ni duplex stainless steel
Jianquan Wan, Haihui Ruan, Jianbiao Wang and Sanqiang ShiMaterials Science and Engineering: A 711 571 (2018)
https://doi.org/10.1016/j.msea.2017.11.079
Analysis of the Crystallographic Microtexture of a UNS S32205 and a UNS S32304 Duplex Stainless Steels After Cold Rolling and Heat Treatment
Karina Aparecida Martins Barcelos Gonçalves, Dagoberto Brandão Santos and Tarcísio Reis de OliveiraMaterials Research 21 (4) (2018)
https://doi.org/10.1590/1980-5373-mr-2017-0873
Experimental investigations and DICTRA® simulation of sigma phase formation in a duplex stainless steel
Luara da Costa Morais and Rodrigo MagnaboscoCalphad 58 214 (2017)
https://doi.org/10.1016/j.calphad.2017.07.006
Constitutive Equation Development to Model the Hot Forging of ZERON®100 Super Duplex Stainless Steel and Associated Microstructural Evolution
Jamie Pennington, Bradley P. Wynne and Glenn ByrneKey Engineering Materials 716 632 (2016)
https://doi.org/10.4028/www.scientific.net/KEM.716.632
Kinetic Study to Predict Sigma Phase Formation in Duplex Stainless Steels
Daniella Caluscio dos Santos and Rodrigo MagnaboscoMetallurgical and Materials Transactions A 47 (4) 1554 (2016)
https://doi.org/10.1007/s11661-016-3323-z
Determination of interfacial heat transfer coefficients in a sand mould casting process using an optimised inverse analysis
Gianfranco Palumbo, Vito Piglionico, Antonio Piccininni, et al.Applied Thermal Engineering 78 682 (2015)
https://doi.org/10.1016/j.applthermaleng.2014.11.046
Fracture toughness of a welded super duplex stainless steel
Johan Pilhagen, Henrik Sieurin and Rolf SandströmMaterials Science and Engineering: A 606 40 (2014)
https://doi.org/10.1016/j.msea.2014.03.049
On Microstructure and Microhardness of Isothermally Aged UNS S32760 and the Effect on Toughness and Corrosion Behavior
Fady M. Elsabbagh, Rawia M. Hamouda and Mohamed A. TahaJournal of Materials Engineering and Performance 23 (1) 275 (2014)
https://doi.org/10.1007/s11665-013-0619-7
Influence of nickel on the toughness of lean duplex stainless steel welds
Johan Pilhagen and Rolf SandströmMaterials Science and Engineering: A 602 49 (2014)
https://doi.org/10.1016/j.msea.2014.01.093
Metallurgical Analysis on a Cracked Super Duplex Stainless Steel Flange
Tie Liu, Richard Wu Zhiyong, Daqin Xu and Aye Aye AungJournal of Failure Analysis and Prevention 14 (4) 470 (2014)
https://doi.org/10.1007/s11668-014-9832-4
Interface microstructure across cladding of super duplex stainless steel with austenitic stainless steel buffer layer
Morteza Shamanian, Abbas Eghlimi, Masoomeh Eskandarian and Jerzy A. SzpunarSurface and Coatings Technology 259 532 (2014)
https://doi.org/10.1016/j.surfcoat.2014.10.034
356 (2013)
https://doi.org/10.5151/2594-4711-23381
Influence of Sigma Phase Formation on Pitting Corrosion of an Aged UNS S31803 Duplex Stainless Steel
Daniella Caluscio dos Santos, Rodrigo Magnabosco and Carlos de Moura-NetoCorrosion 69 (9) 900 (2013)
https://doi.org/10.5006/0768