Nouveau réactif pour la mise en évidence micrographique du grain austénitique des aciers trempés ou trempés-revenus
Rev. Met. Paris, 52 10 (1955) 830-836
Published online: 2017-03-09
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Prior austenite grain measurement: A direct comparison of EBSD reconstruction, thermal etching and chemical etching
J. Collins, M. Taylor, A.L. Scarlett, E.J. Palmiere and E.J. PickeringMaterials Characterization 208 113656 (2024)
https://doi.org/10.1016/j.matchar.2024.113656
Improvements on the characterization of heterogeneities in grain size by network analysis
Victor Caso Moreira, André Paulo Tschiptschin and Júlio César DutraMaterials Characterization 195 112551 (2023)
https://doi.org/10.1016/j.matchar.2022.112551
Nanobainite Generated in Low‐ and Medium‐Carbon Steels via an Economical Alloying Strategy
Mohamad Akram, Heinz Palkowski and Mohamed Solimansteel research international 93 (6) (2022)
https://doi.org/10.1002/srin.202100575
Effect of Deformation Sequence and Coiling Conditions on Precipitation Strengthening in High Ti–Nb-Microalloyed Steels
L. G. Sesma, B. Lopez and B. PeredaMetallurgical and Materials Transactions A 53 (6) 2270 (2022)
https://doi.org/10.1007/s11661-022-06670-w
Determination of the degree of recrystallization of a microalloyed HSLA steel by using metallographic methods
S. Monschein, N. Kostwein, K. S. Ragger, et al.Practical Metallography 59 (6) 317 (2022)
https://doi.org/10.1515/pm-2022-1007
Determination of grain size distribution of prior austenite grains through a combination of a modified contrasting method and machine learning
M. Laub, B.-I. Bachmann, E. Detemple, et al.Practical Metallography 60 (1) 4 (2022)
https://doi.org/10.1515/pm-2022-1025
Efficient reconstruction of prior austenite grains in steel from etched light optical micrographs using deep learning and annotations from correlative microscopy
Björn-Ivo Bachmann, Martin Müller, Dominik Britz, et al.Frontiers in Materials 9 (2022)
https://doi.org/10.3389/fmats.2022.1033505
Influence of the Heat Input on the Dendritic Solidification Structure and the Mechanical Properties of 2.25Cr-1Mo-0.25V Submerged-Arc Weld Metal
Hannah Schönmaier, Ronny Krein, Martin Schmitz-Niederau and Ronald SchnitzerJournal of Materials Engineering and Performance 30 (10) 7138 (2021)
https://doi.org/10.1007/s11665-021-05922-x
Effect of Nb on the Austenite Microstructural Homogeneity of Hot Rolled Rebars
Beatriz Pereda, Felipe Bastos, Beatriz López and J.M. Rodriguez-IbabeMaterials Science Forum 1016 1127 (2021)
https://doi.org/10.4028/www.scientific.net/MSF.1016.1127
Visualization of Prior Austenite Grain Boundaries in Low-Carbon Steels
M. Böcker, M. Steinbacher and R. Fechte-HeinenPractical Metallography 58 (11) 697 (2021)
https://doi.org/10.1515/pm-2021-0062
A Multiscale-Based Approach to Understand Dendrite Deflection in Continuously Cast Steel Slab Samples
Arunava SenGupta, Begoña Santillana, Seetharaman Sridhar and Michael AuingerMetallurgical and Materials Transactions A 52 (8) 3413 (2021)
https://doi.org/10.1007/s11661-021-06313-6
Particle encapsulation techniques for atom probe tomography of precipitates in microalloyed steels
Johannes Webel, Louis Weber, Emina Vardo, et al.Ultramicroscopy 223 113219 (2021)
https://doi.org/10.1016/j.ultramic.2021.113219
Microstructure and mechanical properties of partially ferritic Q&P steels
Christoph Kickinger, Clemens Suppan, Thomas Hebesberger, Ronald Schnitzer and Christina HoferMaterials Science and Engineering: A 815 141296 (2021)
https://doi.org/10.1016/j.msea.2021.141296
Automated reconstruction of parent austenite phase based on the optimum orientation relationship
Edgar Gomes de Araujo, Hadi Pirgazi, Mehdi Sanjari, Mohsen Mohammadi and Leo A. I. KestensJournal of Applied Crystallography 54 (2) 569 (2021)
https://doi.org/10.1107/S1600576721001394
Microstructural characterization of a double pulse resistance spot welded 1200 MPa TBF steel
Manfred Stadler, Martin Gruber, Ronald Schnitzer and Christina HoferWelding in the World 64 (2) 335 (2020)
https://doi.org/10.1007/s40194-019-00835-9
Effect of High Ti Contents on Austenite Microstructural Evolution During Hot Deformation in Low Carbon Nb Microalloyed Steels
Leire García-Sesma, Beatriz López and Beatriz PeredaMetals 10 (2) 165 (2020)
https://doi.org/10.3390/met10020165
Evolution of Ms Temperature as a Function of Composition and Grain Size
A. Arlazarov, E. Soares Barreto, N. Kabou and D. HuinMetallurgical and Materials Transactions A 51 (12) 6159 (2020)
https://doi.org/10.1007/s11661-020-06022-6
Etching Methods for the Microstructural Characterization of a Heat Resistant 2.25Cr-1Mo-0.25V Weld Metal
H. Schönmaier, M. Pölzgutter and R. SchnitzerPractical Metallography 57 (1) 5 (2020)
https://doi.org/10.3139/147.110597
Precipitation and grain growth modelling in Ti-Nb microalloyed steels
Alexis Graux, Sophie Cazottes, David De Castro, et al.Materialia 5 100233 (2019)
https://doi.org/10.1016/j.mtla.2019.100233
Microstructural Analysis of the Recrystallization Behavior of Low Alloyed Steels
Raphael Esterl, Markus Sonnleitner and Ronald Schnitzersteel research international 90 (3) (2019)
https://doi.org/10.1002/srin.201800500
Characterization of Austenite Microstructure from Quenched Martensite Using Conventional Metallographic Techniques and a Crystallographic Reconstruction Procedure
Lorena Sanz, Beatriz López and Beatriz PeredaMetals 8 (5) 294 (2018)
https://doi.org/10.3390/met8050294
Assessment of EBSD Analysis and Reconstruction Methods as a Tool for the Determination of Recrystallized Fractions in Hot-Deformed Austenitic Microstructures
Tim Krämer, Lena Eisenhut, Lionel Germain, et al.Metallurgical and Materials Transactions A 49 (7) 2795 (2018)
https://doi.org/10.1007/s11661-018-4593-4
Microstructural Characterization of Ultra-High Strength Martensitic Steels
R. Esterl, M. Sonnleitner, M. Stadler, G. Wölger and R. SchnitzerPractical Metallography 55 (4) 203 (2018)
https://doi.org/10.3139/147.110491
Prior Austenite Grain Boundary Detection in an Ultra-Cleaned Cr Bearing Microalloyed Steel
Seyed Sadegh Ghasemi Banadkouki and Misagh Ghadiri AnariISIJ International 58 (10) 1868 (2018)
https://doi.org/10.2355/isijinternational.ISIJINT-2017-485
Characterization of heterogeneities in grain size by network analysis
Júlio César Dutra and Tiago Estrela de OliveiraMaterials Characterization 127 222 (2017)
https://doi.org/10.1016/j.matchar.2017.03.010
Validation and Analysis of the Parameters for Reconstructing the Austenite Phase from Martensite Electron Backscatter Diffraction Data
L. Sanz, B. Pereda and B. LópezMetallurgical and Materials Transactions A 48 (11) 5258 (2017)
https://doi.org/10.1007/s11661-017-4289-1
Delineation of Prior Austenite Grain Boundaries in a Low-Alloy High-Performance Steel
V. Sinha, E. J. Payton, M. Gonzales, R. A. Abrahams and B. S. SongMetallography, Microstructure, and Analysis 6 (6) 610 (2017)
https://doi.org/10.1007/s13632-017-0403-4
The Influence of Vanadium on Ferrite and Bainite Formation in a Medium Carbon Steel
T. Sourmail, C. Garcia-Mateo, F. G. Caballero, et al.Metallurgical and Materials Transactions A 48 (9) 3985 (2017)
https://doi.org/10.1007/s11661-017-4188-5
Encyclopedia of Iron, Steel, and Their Alloys
George F. Vander VoortEncyclopedia of Iron, Steel, and Their Alloys 664 (2016)
https://doi.org/10.1081/E-EISA-120052826
Austenite reconstruction via EBSD measurements: a tool to understand low Carbon martensite steel properties
Lieven Bracke, Laura Moli Sanchez, Nicolas Bernier, N. Schryvers and J. Van HumbeeckMATEC Web of Conferences 33 07005 (2015)
https://doi.org/10.1051/matecconf/20153307005
Investigation of Austenite Evolution in Low-Carbon Steel by Combining Thermo-Mechanical Simulation and EBSD Data
Stephan Weyand, Dominik Britz, Daniel Rupp and Frank MücklichMaterials Performance and Characterization 4 (3) 322 (2015)
https://doi.org/10.1520/MPC20150010
Fully automated orientation relationship calculation and prior austenite reconstruction by random walk clustering
E Gomes and L A I KestensIOP Conference Series: Materials Science and Engineering 82 012059 (2015)
https://doi.org/10.1088/1757-899X/82/1/012059
157 (2015)
https://doi.org/10.1002/9781119019213.ch10
An alternative to the crystallographic reconstruction of austenite in steels
Nicolas Bernier, Lieven Bracke, Loïc Malet and Stéphane GodetMaterials Characterization 89 23 (2014)
https://doi.org/10.1016/j.matchar.2013.12.014
Microstructure, tensile and toughness properties after quenching and partitioning treatments of a medium-carbon steel
E. Paravicini Bagliani, M.J. Santofimia, L. Zhao, J. Sietsma and E. AnelliMaterials Science and Engineering: A 559 486 (2013)
https://doi.org/10.1016/j.msea.2012.08.130
Method for detecting austenite grains in low-carbon steel after hot deformation
D. Ferdian, M. Ariati and A. NormanMetal Science and Heat Treatment 55 (5-6) 281 (2013)
https://doi.org/10.1007/s11041-013-9620-x
The influence of Nb on transformation behavior and mechanical properties of TRIP-assisted bainitic–ferritic sheet steels
K. Hausmann, D. Krizan, K. Spiradek-Hahn, A. Pichler and E. WernerMaterials Science and Engineering: A 588 142 (2013)
https://doi.org/10.1016/j.msea.2013.08.023
Influence of tempering temperature on both the microstructural evolution and elemental distribution in AISI 4340 steels
Nam Suk Lim, Chan Woo Bang, Sanjeev Das, Hyun Woo Jin, Raghavan Ayer and Chan Gyung ParkMetals and Materials International 18 (1) 87 (2012)
https://doi.org/10.1007/s12540-012-0011-4
Modern HSLA steels and role of non-recrystallisation temperature
S Vervynckt, K Verbeken, B Lopez and J J JonasInternational Materials Reviews 57 (4) 187 (2012)
https://doi.org/10.1179/1743280411Y.0000000013
Evaluation of the Austenite Recrystallization by Multideformation and Double Deformation Tests
S. Vervynckt, K. Verbeken, P. Thibaux and Y. Houbaertsteel research international 82 (4) 369 (2011)
https://doi.org/10.1002/srin.201000167
Characterization of the Austenite Recrystallization by Comparing Double Deformation and Stress Relaxation Tests
S. Vervynckt, K. Verbeken, P. Thibaux and Y. Houbaertsteel research international 81 (3) 234 (2010)
https://doi.org/10.1002/srin.200900126
A New Approach to Calculate the γ Orientation Maps in Steels
Pierre Blaineau, Lionel Germain, Michel Humbert and Nathalie GeySolid State Phenomena 160 203 (2010)
https://doi.org/10.4028/www.scientific.net/SSP.160.203
Thermal diffusivity measurements of metastable austenite during continuous cooling
P. Matteis, E. Campagnoli, D. Firrao and G. RuscicaInternational Journal of Thermal Sciences 47 (6) 695 (2008)
https://doi.org/10.1016/j.ijthermalsci.2007.06.014
Austenite grain size in the continuous casting process: Metallographic methods and evaluation
J. Reiter, C. Bernhard and H. PresslingerMaterials Characterization 59 (6) 737 (2008)
https://doi.org/10.1016/j.matchar.2007.06.003
Relationships between tensile and fracture mechanics properties and fatigue properties of large plastic mould steel blocks
Donato Firrao, Paolo Matteis, Giorgio Scavino, et al.Materials Science and Engineering: A 468-470 193 (2007)
https://doi.org/10.1016/j.msea.2006.07.166
New method of grain-boundary extraction by directional optimal filtering: application to estimating creep in metals
Pierre GoutonOptical Engineering 41 (7) 1507 (2002)
https://doi.org/10.1117/1.1480425
Metallographic techniques for the determination of the austenite grain size in medium-carbon microalloyed steels
C Garcı́a de Andrés, M.J Bartolomé, C Capdevila, et al.Materials Characterization 46 (5) 389 (2001)
https://doi.org/10.1016/S1044-5803(01)00142-5
Evaluating creep in metals by grain boundary extraction using directional wavelets and mathematical morphology
S. Journaux, P. Gouton and G. ThauvinJournal of Materials Processing Technology 117 (1-2) 132 (2001)
https://doi.org/10.1016/S0924-0136(01)01057-3
https://doi.org/10.31399/asm.tb.lmcs.t66560453
Wetting agents in metallography
G.F.Vander VoortMaterials Characterization 35 (2) 135 (1995)
https://doi.org/10.1016/1044-5803(95)80111-1
https://doi.org/10.31399/asm.tb.mpp.t67850165
Austenite grain growth in medium and high-carbon steels microalloyed with niobium
R. Coladas, J. Masounave, G. Guérin and J.-P. BaïlonMetal Science 11 (11) 509 (1977)
https://doi.org/10.1179/030634577790432857
Temper brittleness and grain boundary etching
P.R. Krahe and M. GuttmannMetallography 7 (1) 5 (1974)
https://doi.org/10.1016/0026-0800(74)90025-1
Revealing the former austenite grain boundaries of high-purity iron-carbon alloys
P.R. KraheMetallography 4 (2) 171 (1971)
https://doi.org/10.1016/0026-0800(71)90027-9
Phénomènes transitoires au cours de la déformation plastique à chaud de l'acier
C. Rossard and P. BlainRheologica Acta 1 (2-3) 163 (1958)
https://doi.org/10.1007/BF01968860