The genesis of the Schaeffler diagram in the history of stainless steel
Metall. Res. Technol., 114 6 (2017) 613
Published online: 2017-10-13
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Stability of Expanded Austenite During Annealing in Vacuum
Stephan Mändl, Hyemin Oh, Daniel Hristov and Darina ManovaMaterials 18 (3) 546 (2025)
https://doi.org/10.3390/ma18030546
Sustainable Fe–Cr–Ni Stainless Steels via Hydrogen Reduction of Blended Oxides
Maryam Al-Buainain and David C. DunandACS Sustainable Chemistry & Engineering 13 (23) 8687 (2025)
https://doi.org/10.1021/acssuschemeng.5c02264
In-situ XRD investigations during nitriding of duplex steel 318LN
D. Manova, J. Bauer, A. Dalke and S. MändlSurface and Coatings Technology 509 132222 (2025)
https://doi.org/10.1016/j.surfcoat.2025.132222
Manufacturing and mechanical performance of a large-scale stainless steel vessel fabricated by wire-arc direct energy deposition
Kalle Lipiäinen, Shahriar Afkhami, Hannu Lund, Antti Ahola, Santeri Varis, Tuomas Skriko and Timo BjörkMaterials & Design 243 113044 (2024)
https://doi.org/10.1016/j.matdes.2024.113044
Effects of the Cr and Ni Concentrations on the Fatigue and Corrosion Resistances of Fe–Mn–Cr–Ni–Si Alloys for Seismic Damping Applications
Fumiyoshi Yoshinaka, Yusuke Tsutsumi, Tomoya Nagira, Susumu Takamori, Satoshi Emura, Takahiro Sawaguchi, Hideki Katayama, Terumi Nakamura, Yasuhiko Inoue, Susumu Motomura and Atsumichi KushibeISIJ International 64 (7) 1197 (2024)
https://doi.org/10.2355/isijinternational.ISIJINT-2023-437
Microstructure and Mechanical Properties of Gas Metal Arc-welded Fe–Mn–Si Seismic Damping Alloy
Tomoya Nagira, Terumi Nakamura, Fumiyoshi Yoshinaka, Takahiro Sawaguchi and Yasuhiko InoueISIJ International 64 (11) 1705 (2024)
https://doi.org/10.2355/isijinternational.ISIJINT-2024-174
Phase transformation mechanisms occurring during spark plasma sintering elaboration of new duplex composite stainless steels
R. Mvodo Eba, M.R. Ardigo-Besnard, J.-P. Chateau-Cornu, F. Herbst, N. Geoffroy, A. Besnard, C. Vandenabeele, S. Lucas, A. Descamps-Mandine and C. JosseMaterials Chemistry and Physics 325 129796 (2024)
https://doi.org/10.1016/j.matchemphys.2024.129796
(2024)
https://doi.org/10.2139/ssrn.4898140
A novel heterogeneous particle addition method based on laser cladding hybrid wire arc additive manufacturing: improvement performance of stainless steel components
Chao Chen, Guorui Sun, Boqiao Ren, Hao Wang, Yaowen Zhang and Xiaohui ZhaoVirtual and Physical Prototyping 19 (1) (2024)
https://doi.org/10.1080/17452759.2024.2397815
The Effect of Preheating on the Mechanical Properties of AISI 1037 and AISI 304 Welded Joints Using Shielded Metal Arc Welding
Sudarsono, Amir Arifin, Gunawan, Muhammad R. Y. Q. A. Wijaya, La Ode Ahmad Barata and Mohd Ikram RamliMaterials 17 (23) 5780 (2024)
https://doi.org/10.3390/ma17235780
Micro-mechanism of static softening of high nitrogen austenitic stainless steel
Wen Hui-Hua, Qin Feng-Ming and Chen Hui-QinMetallurgical Research & Technology 121 (6) 616 (2024)
https://doi.org/10.1051/metal/2024071
The role of TiN inoculant on microstructure and properties in wire arc directed energy deposition of super duplex stainless steels
Xianhang Huang, Ke Yang, Xiaodong Zou, Chi Tat Kwok and Linlin PanMaterials Characterization 214 114090 (2024)
https://doi.org/10.1016/j.matchar.2024.114090
Description of a new concept for the development of adapted hot-work tool steels for laser-powder bed fusion
Arne Röttger, Johannes Boes, Felix Großwendt and Sebastian WeberAdditive Manufacturing 61 103292 (2023)
https://doi.org/10.1016/j.addma.2022.103292
Microstructure of Butt Joint of High-Silicon Steel Made Using CO2 Laser Welding and Inconel 82 Filler
Ming-Feng Chiang, Ping-Hui Chien, Tzu-Yuan Lo and Ren-Kae ShiueMetals 13 (2) 234 (2023)
https://doi.org/10.3390/met13020234
Comprehensive Structural Integrity
Stacy Moore, Tomas Liam Martin and Peter Edwin John FlewittComprehensive Structural Integrity 163 (2023)
https://doi.org/10.1016/B978-0-12-822944-6.00044-X
Development of Fe-Mn-Cr-Ni-Si Alloy for Weld Seismic Dampers with High Fatigue Durability
Fumiyoshi Yoshinaka, Takahiro Sawaguchi, Susumu Takamori, et al.Materia Japan 62 (4) 229 (2023)
https://doi.org/10.2320/materia.62.229
Semi-Continuous Functionally Graded Material Austenitic to Super Duplex Stainless Steel Obtained by Laser-Based Directed Energy Deposition
Juan Carlos Pereira, David Aguilar, Iosu Tellería, Raul Gómez and María San SebastianJournal of Manufacturing and Materials Processing 7 (4) 150 (2023)
https://doi.org/10.3390/jmmp7040150
Advanced manufacturing applied to nuclear fusion—challenges and solutions
Steve JonesJournal of Physics: Energy 5 (4) 042001 (2023)
https://doi.org/10.1088/2515-7655/acf687
Investigation of the effects of filler metal and number of passes used in AISI 304 stainless steel-copper joints by TIG welding
Semih Okan Yaz and Eren YılmazWelding in the World 67 (5) 1123 (2023)
https://doi.org/10.1007/s40194-023-01466-x
Mechanical characteristics and stretch-bend failure analysis on ultra high frequency pulsed gas tungsten arc welded thin FSS 409/430 dissimilar joints
Anandharajan Nagarajan and Balakrishnan MarimuthuMaterials Research Express 10 (9) 096518 (2023)
https://doi.org/10.1088/2053-1591/acf9de
A new insight into the phase stability in high entropy alloys
Shankha S. Basu, Parijat P. Jana and Manojit GhoshMaterials Today Communications 37 107394 (2023)
https://doi.org/10.1016/j.mtcomm.2023.107394
Tailoring Microstructure of Austenitic Stainless Steel with Improved Performance for Generation-IV Fast Reactor Application: A Review
Shenghu Chen, Ang Xie, Xinliang Lv, et al.Crystals 13 (2) 268 (2023)
https://doi.org/10.3390/cryst13020268
A Study on Metallographic and Machining Characteristics of Functionally Graded Material Produced by Directed Energy Deposition
Inwoong Noh, Jaehun Jeon and Sang Won LeeCrystals 13 (10) 1491 (2023)
https://doi.org/10.3390/cryst13101491
2694 020009 (2023)
https://doi.org/10.1063/5.0118815
Mechanism of FIB-Induced Phase Transformation in Austenitic Steel
Joseph R. Michael, Lucille A. Giannuzzi, M. Grace Burke and Xiang Li ZhongMicroscopy and Microanalysis 28 (1) 70 (2022)
https://doi.org/10.1017/S1431927621013738
Laser Additive Manufacturing of Duplex Stainless Steel via Powder Mixture
Chengsong Cui, Louis Becker, Eric Gärtner, Johannes Boes, Jonathan Lentz, Volker Uhlenwinkel, Matthias Steinbacher, Sebastian Weber and Rainer Fechte-HeinenJournal of Manufacturing and Materials Processing 6 (4) 72 (2022)
https://doi.org/10.3390/jmmp6040072
A Grinding-Burnishing Approach to Enhancing Surface Integrity, Tribological, and Corrosion Behavior of Laser-Cladded AISI 431 Alloys
Mohammad Uddin, Remi Santifoller, Colin Hall and Thomas SchlaeferJournal of Manufacturing Science and Engineering 144 (7) (2022)
https://doi.org/10.1115/1.4052929
Influence of Si content on the microstructure and mechanical properties of silicon stainless steel
Prince Setia, T. Venkateswaran, K. Thomas Tharian, Jayant Jain, Sudhanshu S. Singh and Shashank ShekharMaterials Science and Engineering: A 829 142141 (2022)
https://doi.org/10.1016/j.msea.2021.142141
Effect of filler metal composition on microstructural and mechanical characterization of dissimilar welded joint of nitronic steel and super duplex stainless steel
Anup Kumar Maurya, Chandan Pandey and Rahul ChhibberArchives of Civil and Mechanical Engineering 22 (2) (2022)
https://doi.org/10.1007/s43452-022-00413-9
Effect of filler metal on solidification, microstructure and mechanical properties of dissimilar super duplex/pipeline steel GTA weld
Waris Nawaz Khan and Rahul ChhibberMaterials Science and Engineering: A 803 140476 (2021)
https://doi.org/10.1016/j.msea.2020.140476
Mn-stabilized austenitic steel strengthened by nano-scale β-NiAl (B2), FCC-Cu, and carbides via ICME design
Colin A. Stewart, Richard W. Fonda and Keith E. KniplingScripta Materialia 200 113903 (2021)
https://doi.org/10.1016/j.scriptamat.2021.113903
Microstructure analysis of novel LPBF-processed duplex stainless steels correlated to their mechanical and corrosion properties
Marie Luise Köhler, Johannes Kunz, Simone Herzog, Anke Kaletsch and Christoph BroeckmannMaterials Science and Engineering: A 801 140432 (2021)
https://doi.org/10.1016/j.msea.2020.140432
Influence of γ→α transformation temperature range bias on structural stability of laminar steel materials
A I Plokhikh, A A Minakov and D V VlasovaJournal of Physics: Conference Series 1990 (1) 012037 (2021)
https://doi.org/10.1088/1742-6596/1990/1/012037
Failure Analysis of the High Nitrogen Austenitic Stainless-Steel Boiler Tank Weldments
Vijeesh Vijayan, G. Ravichandran, Muralidhara Rao and Shashikantha KarinkaJournal of Failure Analysis and Prevention 21 (3) 976 (2021)
https://doi.org/10.1007/s11668-021-01142-6
Microstructure and Mechanical Properties of 10CrNi3MoV Steel-SS304L Composite Bimetallic Plates Butt Joint by Shielded Metal Arc Welding
Changqing Ye, Guangyao Lu, Qingsong Liu, et al.Journal of Materials Engineering and Performance 30 (3) 2047 (2021)
https://doi.org/10.1007/s11665-021-05477-x
Aluminum-alloyed lightweight stainless steels strengthened by B2-(Ni,Fe)Al precipitates
M. Harwarth, G. Chen, R. Rahimi, H. Biermann, A. Zargaran, M. Duffy, M. Zupan and J. MolaMaterials & Design 206 109813 (2021)
https://doi.org/10.1016/j.matdes.2021.109813
Development of ferrous-based weldable seismic damping alloy with prolonged plastic fatigue life
Fumiyoshi Yoshinaka, Takahiro Sawaguchi, Susumu Takamori, et al.Scripta Materialia 197 113815 (2021)
https://doi.org/10.1016/j.scriptamat.2021.113815
A Microstructural Investigation of Austenitic Heat Resistant Alloy after 500 h of Steam Oxidation
Bogdan Rutkowski, Krzysztof Baran, Remigiusz Błoniarz and Tomasz KoziełMaterials 14 (6) 1453 (2021)
https://doi.org/10.3390/ma14061453
Corrosion Resistance of Dissimilar GTA Welds of Pipeline Steel and Super Duplex Stainless Steels in Synthetic Brine
V.H. Vargas, A. Albiter, M.A. Domínguez-Aguilar, G. Altamirano and C. MaldonadoCorrosion 77 (6) 668 (2021)
https://doi.org/10.5006/3746
An analysis of magnetic pumps failure used in the oil refinery industry: Metallurgical point of view
M.R. Etminanfar, M.S. Safavi and N. Abbasian-VardinEngineering Failure Analysis 112 104533 (2020)
https://doi.org/10.1016/j.engfailanal.2020.104533
A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application
Gaurav Dak and Chandan PandeyJournal of Manufacturing Processes 58 377 (2020)
https://doi.org/10.1016/j.jmapro.2020.08.019
Quantifying phase transformation during the manufacturing process of AISI 430 ferritic stainless steel
I Collado, A Núñez Galindo, A Ruiz, J F Almagro Bello and F J BotanaIOP Conference Series: Materials Science and Engineering 891 (1) 012007 (2020)
https://doi.org/10.1088/1757-899X/891/1/012007
Effect of laser scan length on the microstructure of additively manufactured 17-4PH stainless steel thin-walled parts
Yu Sun, Rainer J. Hebert and Mark AindowAdditive Manufacturing 35 101302 (2020)
https://doi.org/10.1016/j.addma.2020.101302
Caracterización de uniones soldadas robotizadas GTAW-P sin metal de aporte en acero inoxidable ferrítico AISI 430
Graciela Rosel, Benjamín Vargas, Verónica Estrella, et al.Quimica Hoy 10 (2) 7 (2020)
https://doi.org/10.29105/qh10.2-122
Chromium-doped Fe-Co-Ni binders for diamond cutting tools: The features of the structure, mechanical properties, and adhesion to diamond
P.A. Loginov, U.A. Zhassay, M.Ya. Bychkova, et al.International Journal of Refractory Metals and Hard Materials 92 105289 (2020)
https://doi.org/10.1016/j.ijrmhm.2020.105289
Austenitic Stainless Steel Powders with Increased Nitrogen Content for Laser Additive Manufacturing
Chengsong Cui, Volker Uhlenwinkel, Alwin Schulz and Hans-Werner ZochMetals 10 (1) 61 (2019)
https://doi.org/10.3390/met10010061
Microstructure and mechanical properties of SUS304/Q235 multilayer steels fabricated by roll bonding and annealing
B.Y. Zhang, B.X. Liu, J.N. He, et al.Materials Science and Engineering: A 740-741 92 (2019)
https://doi.org/10.1016/j.msea.2018.10.054
Nd:YAG laser surface hardening of AISI 431 stainless steel; mechanical and metallurgical investigation
Ali Khorram, Akbar Davoodi Jamaloei, Abed Jafari and Mahmoud MoradiOptics & Laser Technology 119 105617 (2019)
https://doi.org/10.1016/j.optlastec.2019.105617
Metallurgical Aspects in the Welding of Clad Pipelines—A Global Outlook
Ivan Bunaziv, Vigdis Olden and Odd M. AkselsenApplied Sciences 9 (15) 3118 (2019)
https://doi.org/10.3390/app9153118
Effects of Long-term Artificial-Aging on the Hardness Variation of Dissimilar Metal Weldments
Chung-Seok KimJournal of the Korean Society of Manufacturing Process Engineers 18 (1) 31 (2019)
https://doi.org/10.14775/ksmpe.2019.18.1.031
Mechanical characterisation of stainless steel parts produced by direct metal laser sintering with virgin and reused powder
V. Contaldi, F. Del Re, B. Palumbo, et al.The International Journal of Advanced Manufacturing Technology 105 (7-8) 3337 (2019)
https://doi.org/10.1007/s00170-019-04416-4
Dissimilar resistance spot welding of AISI 304 to AISI 409 stainless steels: mechanical properties and microstructural evolutions
Mehdi Safari, Hossein Mostaan and Abdoreza GhaderiMetallurgical Research & Technology 115 (6) 610 (2018)
https://doi.org/10.1051/metal/2018057
Revealing extraordinary strength and toughness of multilayer TWIP/Maraging steels
W.X. Yu, B.X. Liu, X.P. Cui, et al.Materials Science and Engineering: A 727 70 (2018)
https://doi.org/10.1016/j.msea.2018.04.097