Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Assessment of castability issues in interstitial-free (IF) steels

P. Kaushik, D. Kruse, M. Ozgu

Rev. Met. Paris, 105 2 (2008) 92-101

Published online: 2008-03-08

DOI: https://doi.org/10.1051/metal:2008020

PDF (371.7 KB)

This article has been cited by the following article(s):

Inclusion characterisation – tool for measurement of steel cleanliness and process control: Part 1

P. Kaushik, H. Pielet and H. Yin
Ironmaking & Steelmaking 36 (8) 561 (2009)
DOI: 10.1179/030192309X12492910938131
See this article

Inclusion characterisation – tool for measurement of steel cleanliness and process control: Part 2

P. Kaushik, H. Pielet and H. Yin
Ironmaking & Steelmaking 36 (8) 572 (2009)
DOI: 10.1179/030192309X12492910938177
See this article

Influence of Al/Ti Ratio in Ti-ULC Steel and Refractory Components of Submerged Entry Nozzle on Formation of Clogging Deposits

Joo-Hyeok Lee, Myeong-Hun Kang, Sung-Kwang Kim, et al.
ISIJ International 59 (5) 749 (2019)
DOI: 10.2355/isijinternational.ISIJINT-2018-672
See this article

Inclusion Characterization of Titanium Stabilized Ultra Low Carbon Steels: Impact of Oxygen Activity before Deoxidation

C. Lyons and P. Kaushik
steel research international 82 (12) 1394 (2011)
DOI: 10.1002/srin.201100163
See this article

Application of Optical Floating Zone Method to Dissolution Kinetics of Inclusions in a Steelmaking Slag

Mukesh Sharma, Hanna A. Dabkowska and Neslihan Dogan
steel research international 90 (1) 1800367 (2019)
DOI: 10.1002/srin.201800367
See this article

Study on the Influence of FeTi‐Addition on the Inclusion Population in Ti‐Stabilized ULC Steels and Its Consequences for SEN‐Clogging

Philipp Dorrer, Susanne K. Michelic, Christian Bernhard, Alexander Penz and Roman Rössler
steel research international 90 (7) 1800635 (2019)
DOI: 10.1002/srin.201800635
See this article

Growth of Initial Clog Deposits during Continuous Casting of Ti-ULC Steel – Formation and Reduction of the Initial Deposits at Nozzle/Steel Interface

Joo-Hyeok Lee and Youn-Bae Kang
ISIJ International 60 (3) 426 (2020)
DOI: 10.2355/isijinternational.ISIJINT-2019-384
See this article