Metallurgical Research & Technology

Investigation of the mechanism for selective flocculation process using natural iron ore tailings

Lopamudra Panda, Surendra Kumar Biswal, Rayasam Venugopal and Narayan R. Mandre

Metall. Res. Technol., 117 1 (2020) 102

Published online: 13 January 2020

DOI: https://doi.org/10.1051/metal/2019047

Average carbon content change during gas-solid decarburization of 2 mm iron sheet with a high carbon content

Rong Cheng, Liqun Ai, Lu-kuo Hong and Cai-jiao Sun

Metall. Res. Technol., 117 1 (2020) 103

Published online: 13 January 2020

DOI: https://doi.org/10.1051/metal/2019069

Inflow process of Fe, Ni, and Cr impurities in Ti sponge during kroll process

Sheng Zhuo, Li Kaihua, Li Liang and Cheng Xiaozhe

Metall. Res. Technol., 117 1 (2020) 101

Published online: 03 January 2020

DOI: https://doi.org/10.1051/metal/2019067

Effect of manganese pre-partitioning process on the microstructure and mechanical properties of low carbon dual phase steel

Yonggang Deng, Hongshuang Di and Raja Devesh Kumar Misra

Metall. Res. Technol., 116 6 (2019) 639

Published online: 12 December 2019

DOI: https://doi.org/10.1051/metal/2019068

Effects of basicity and CaF₂ on the viscosity of CaF₂–CaO–SiO₂ slag for electroslag remelting process

Yigui Lao, Yunming Gao, Fangjie Deng, Qiang Wang and Guangqiang Li

Metall. Res. Technol., 116 6 (2019) 638

Published online: 10 December 2019

DOI: https://doi.org/10.1051/metal/2019066

Large eddy simulation modelling of asymmetrical flow structures in a vertical-bending continuous caster

Peng Zhao, Yinhe Lin, Bin Yang, Kegao Liu, Jingrui Zhao and Kai Tang

Metall. Res. Technol., 116 6 (2019) 636

Published online: 04 December 2019

DOI: https://doi.org/10.1051/metal/2019065

A novel hot-tamping process for producing an improved quality of coke

Keliang Pang, Dongjie Liu, Ji Wu, Cai Liang, Jiliang Ma and Qingwen Wei

Metall. Res. Technol., 116 6 (2019) 637

Published online: 04 December 2019

DOI: https://doi.org/10.1051/metal/2019061

Thermal conductivity of titanium slags

Juhani Heimo, Ari Jokilaakso, Marko Kekkonen, Merete Tangstad and Anne Støre

Metall. Res. Technol., 116 6 (2019) 635

Published online: 27 November 2019

DOI: https://doi.org/10.1051/metal/2019064

Study on microstructure and texture of a new-type low Si high Mn non-oriented silicon steel 50W250

Lifeng Fan, Sai Li, Lijun Xiao, Guangbo Tang, Liang Bai and Jiao Huang

Metall. Res. Technol., 116 6 (2019) 632

Published online: 26 November 2019

DOI: https://doi.org/10.1051/metal/2019059

Transverse heterogeneity of interfacial bonding behavior during roll bonding of Cu/Al bimetallic plates

Xiang Yu Gao, Tao Wang, Zhong Kai Ren, Jian Chao Han, Dong Ping He and Sha Li

Metall. Res. Technol., 116 6 (2019) 633

Published online: 26 November 2019

DOI: https://doi.org/10.1051/metal/2019058