La réussite épiasseur en laminage à chaud associée au cédage et à la mécanique cage p. 1255 B. Petit, R. Caillaud, M. Seigneurbieux and G. Serena Published online: 20 January 2017 DOI: https://doi.org/10.1051/metal/199390101255 AbstractPDF (11.2 MB)
Les pièces forcées allégées mais plus performantes p. 1265 T.B. Herlan Published online: 20 January 2017 DOI: https://doi.org/10.1051/metal/199390101265 AbstractPDF (16.1 MB)
Quantitative analysis of zinc and zinc alloy coatings on steel p. 1277 A. De Boeck, L. Vanlerberghe and M. Vanthournout Published online: 20 January 2017 DOI: https://doi.org/10.1051/metal/199390101277 AbstractPDF (7.88 MB)
Mise au point du Solplex sur la ligne de revêtement organique de Sollac Florange p. 1283 R. Perrin Published online: 20 January 2017 DOI: https://doi.org/10.1051/metal/199390101283 AbstractPDF (6.26 MB)
Fer blanc pour boîte boisson deux pièces p. 1289 M. Lespagnol, J. Bruwaert, J.C. Gythiel, A. Poupart Lafarge and J.P. Markey Published online: 20 January 2017 DOI: https://doi.org/10.1051/metal/199390101289 AbstractPDF (4.64 MB)
Mise en forme des aciers inoxydables par tréfilage p. 1293 M. Laverroux Published online: 20 January 2017 DOI: https://doi.org/10.1051/metal/199390101293 AbstractPDF (15.0 MB)
Prévision du comportement au cours du tréfilage du fil à haute teneur en C p. 1303 M. Jallon and M. Hergesheimer Published online: 20 January 2017 DOI: https://doi.org/10.1051/metal/199390101303 AbstractPDF (8.12 MB)
Formage à froid : intérêt et exigences de la simulation numérique pour l'adéquation du matériau et de sa mise en œuvre aux propriétés des pièces p. 1311 E. Bourgain, C. Bertoncelli and M. Dunand Published online: 24 January 2017 DOI: https://doi.org/10.1051/metal/199390101311 AbstractPDF (14.63 MB)
Production of large diameter linepipe for the transportation of highly corrosive crude oil and natural gas p. 1323 M.K. Graf, I. von Hagen and K.A. Niederhoff Published online: 20 January 2017 DOI: https://doi.org/10.1051/metal/199390101323 AbstractPDF (15.3 MB)
A new material for railway bridges : variable thickness plates p. 1333 J.M. Vigo, G. Guarrigues, J. Granboulan, J.P. Gourmelon and I. Mazou Published online: 20 January 2017 DOI: https://doi.org/10.1051/metal/199390101333 AbstractPDF (8.88 MB)
Contribution of high strength steels to the absorption of impact energy p. 1341 J.L. Geoffroy, I. Cambien and A. Jouet Published online: 20 January 2017 DOI: https://doi.org/10.1051/metal/199390101341 AbstractPDF (9.75 MB)
Étude du formage d'un embouti en acier d'épaisseur 0,4 mm p. 1349 M. Munier Published online: 20 January 2017 DOI: https://doi.org/10.1051/metal/199390101349 AbstractPDF (10.9 MB)
Aciers moulés inoxydables martensitiques, propriétés d'emploi et de mise en œuvre p. 1357 M.T. Leger Published online: 20 January 2017 DOI: https://doi.org/10.1051/metal/199390101357 AbstractPDF (15.9 MB)
Compte rendu du 1er Congrès Européen des Aciéries à l'Oxygène (EOSC 93) (Düsseldorf-Neuss, RFA, 21/23 juin 1993) p. 1367 Ph. Cesselin, P. Ayed and C. Marique Published online: 20 January 2017 DOI: https://doi.org/10.1051/metal/199390101367 AbstractPDF (18.8 MB)