Revue de Métallurgie

Free Access

Résumé des articles techniques p. V

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal/20011001

• Abstract
• PDF (27.49 KB)

WETFINE, a new gas cleaning technology for sinter and pellet plants p. 825

K. Hofstadler, F. Muraer, D. Steiner and W. Gebert

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001129

• Abstract
• PDF (287.4 KB)

Second generation rotary furnaces, an even more viable alternative to cupola and electric induction furnaces p. 833

D. Levert

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001131

• Abstract
• PDF (60.20 KB)

Abatement of organic emissions in eaf exhaust flue gas p. 839

J.-P. Birat, A. Arion, M. Faral, F. Baronnet, P.-M. Marquaire and P. Rambaud

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001132

• Abstract
• PDF (384.5 KB)

Revamping of the RH degasser of Cockerill-Sambre Chertal p. 855

G. Dauchot, A. Werner, X. Paternotte and J. Defays

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001133

• Abstract
• PDF (171.5 KB)

Automation of a linked pickling and tandem mill at Bethlehem Steel p. 861

G. Keintzel, R. Schneeweis, B. Schlegl and M. Lichtenwagner

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001134

• Abstract
• PDF (949.4 KB)

Statistical analysis of the thickness variations in coils of packaging steel p. 873

Ph. Hollebeke

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001135

• Abstract
• PDF (223.8 KB)

Stretch-reducing mill : a new approach by neural networks p. 881

C. Mapelli and L. Montelatici

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001130

• Abstract
• PDF (118.4 KB)

Influence of martensite-austenite constituents on heat affected zone toughness of C-Mn steel welds p. 889

D. Kaplan and A. Lambert-Perlade

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001136

• Abstract
• PDF (423.4 KB)

Application of high-strength steel sheets for automobiles in Japan p. 899

M. Takita and H. Ohashi

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001137

• Abstract
• PDF (679.8 KB)

Patchworks: from design to manufacture p. 911

P.-D. Petitjean, J.-C. Lescart, J.-Y. Sener and S. Delfanne

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001138

• Abstract
• PDF (818.7 KB)

Tube and sheet hydroformed steel components for autobody application p. 927

E.-J. Drewes, K. Blümel and F.-J. Lenze

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001139

• Abstract
• PDF (638.3 KB)