Revue de Métallurgie

Free Access

Résumé des articles techniques p. III

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal/20011103

• Abstract
• PDF (19.94 KB)

Journées sidérurgiques internationales ATS 2001 : Résumés des communications p. 937

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal/20011101

• Abstract
• PDF (178.3 KB)

L'acier en France en 2000 p. 981

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal/20011102

• Abstract
• PDF (60.46 KB)

PRIMUS, a new process for recycling by-products and producing virgin iron p. 987

J. L. Roth, R. Frieden, T. Hansmann, J. Monai and M. Solvi

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001140

• Abstract
• PDF (617.7 KB)

Sinter plant automation on a new level ! p. 999

S. Wendong, D. Bettinger, G. Straka and K. Stohl

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001141

• Abstract
• PDF (561.1 KB)

The control of initial solidification by the imposition of a pulsative AC electromagnetic field p. 1009

M. Tani, J. Tanaka, N. Yamasaki, K. Fujisaki, E. Anzai, K. Isobe and K. Miyazawa

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001100

• Abstract
• PDF (211.0 KB)

Electromagnetic casting of slabs : development of numerical models for an AC and DC configuration in the mould p. 1015

P. Gardin, B. Dumont, M. Anderhuber, J. M. Galpin, Y. Delannoy, A. Gagnoud and J. Hamburger

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001142

• Abstract
• PDF (592.6 KB)

Improvement of billet surface quality by ultra-high-frequency electromagnetic casting p. 1025

K. Ayata, T. lnoue, H. Mori, S. lshiguro, H. Nakata, T. Murakami and T. Kominami

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001143

• Abstract
• PDF (679.8 KB)

Roll lubrication trials at Eko Stahl's hot strip mill p. 1033

R. Schrödter, K. P. Kahle, J. Loose, J. Friedel, P. A. Story and W. Ungerer

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001144

• Abstract
• PDF (837.8 KB)

Optimization of work roll lubrication at the hot strip mill p. 1045

D. Steiner, D. Liquet, G. Nicoloudis, H. Uijdebroeks, A. Depaepe and J. C. Herman

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001145

• Abstract
• PDF (518.2 KB)