Revue de Métallurgie

Free Access

Résumé des articles techniques p. III

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal/20030601

• Abstract
• PDF (43.83 KB)

Clean Steel Block - New developments towards clean steel p. 577

M. Lange, J. Claes and A. Joly

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003102

• Abstract
• PDF (214.5 KB)

Dynamic process models for on-line observation of the vacuum tank degassing process p. 583

B. Kleimt, J. Cappel, J. Hoffmann, D.-J. Sheng and S. Landa

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003121

• Abstract
• PDF (474.2 KB)

Mathematical modelling of the vacuum arc remelting process p. 595

A. Jardy

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003122

• Abstract
• PDF (172.4 KB)

Fumes exhaust control at the electrical arc furnace of Industeel Le Creusot p. 607

E. Dalben, D. Pernet, X. Le Coq, A. Mouchette and J.-L. Beau

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003123

• Abstract
• PDF (171.6 KB)

VAI's advanced equipments for high-performance casters p. 613

A. Flick, M. Thalhammer, M. Stiftinger and O. Schulz

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003124

• Abstract
• PDF (2.190 MB)

Development of a sensor for visualization of steel flow in the continuous casting mould p. 629

S.-R. Higson, P. Drake, D.-W. Stamp, A. Peyton, R. Binns, B. Lionheart and A. Lyons

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003125

• Abstract
• PDF (181.5 KB)

Measurement of steel velocities in the mould p. 633

D.-J. Scoones and S. Nijman

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003126

• Abstract
• PDF (57.60 KB)

Steel product development in ACB - Initial and present situation - Productivity increase and new developments on thin slab casting and rolling p. 637

F. Aristegui, J.-I. Lángara, I. Lasa, A. Fernández, J. Miñambres and A. Calderón

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003127

• Abstract
• PDF (172.9 KB)

Impact of the rejection of water by the Fos-sur-Mer plant of Sollac Arcelor on the Mediterranean Sea p. 645

N. Baglin, A. Dufour, A. Ziebel and A. Ramade

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003128

• Abstract
• PDF (402.5 KB)

Fast curing of organic and inorganic coatings by high frequency induction p. 653

J.-M. Puente, S. Fernández, F. Alonso, A. Argüelles and L. Andrés

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003129

• Abstract
• PDF (107.9 KB)

ULSAB-AVC (Advances Vehicle Concepts). A contribution to the challenges facing automakers p. 659

M. Dittlo, G. Sanz and C. Schneider

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003130

• Abstract
• PDF (792.1 KB)