Revue de Métallurgie

Free Access

Résumé des articles techniques p. III

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal/20037801

• Abstract
• PDF (49.41 KB)

Programme préliminaire des Journées Sidérurgiques Internationales de l'ATS 2003 p. 667

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal/20037802

• Abstract
• PDF (282.4 KB)

Mathematical modelling of the plasma arc behaviour in the vacuum arc remelting process p. 683

P. Chapelle, J.-P. Bellot, H. Duval, A. Jardy and D. Ablitzer

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003151

• Abstract
• PDF (580.9 KB)

Production of ultra high strengh steels by turbulent water cooling equipment (TWICE) p. 697

D. Bouquegneau, A. Fouarge, V. Lhoist, J. Crahay, P. Klinkenberg and P. Simon

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003152

• Abstract
• PDF (283.6 KB)

Operational results of roll gap lubrication at Eko Stahl's hot strip mill p. 707

R.-P. Bösler, K.-P. Kahle, H.-W. Lamp, N. Naumann, R. Schrödter and R. Blees

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003153

• Abstract
• PDF (340.7 KB)

Hot-strip mill modernization at Shagang (China) p. 713

L. Jian, J. Maierl, R. Pichler and O. Silbermann

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003103

• Abstract
• PDF (2.998 MB)

The rolling of very high strength steels on the Sollac Lorraine HSM p. 729

D. Petitjean, A. Puissant and D. Launet

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003154

• Abstract
• PDF (716.8 KB)

New methods for product qualification and allocation at the exit of galvanizing and continuous annealing lines p. 735

E. Hoogstoel

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003155

• Abstract
• PDF (117.7 KB)

Carburizing section of the continuous annealing furnace for BH steel strip production p. 741

A. Hennion, J.-F. Noville, P. Simon and J. Crahay

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003156

• Abstract
• PDF (209.1 KB)

Rapid cooling in continuous annealing and galvanizing lines p. 751

M. Renard, J.-B. Gouriet, Ph. Planquart, J. Van Beek and J.-M. Buchlin

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003157

• Abstract
• PDF (261.1 KB)

Production and progress work of plates for pipes with strength level of X80 and above p. 757

V. Schwinn, P. Fluess and J. Bauer

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003158

• Abstract
• PDF (262.4 KB)

Extrusion coating of thermoplastics on packaging steel: a technological evolution on the march p. 767

P. Deprez

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003159

• Abstract
• PDF (269.7 KB)

Current situation and properties of ultra-high strength steel for automotive use in Japan p. 779

K. Yamazaki

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003160

• Abstract
• PDF (249.8 KB)

Comparison of two methods for the measurement of the modulus of elasticity of metallic sheets p. 787

S. Konieczka, P. Kaszynski and E. Zani

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003161

• Abstract
• PDF (188.9 KB)