Revue de Métallurgie

Free Access

Résumé des articles techniques p. III

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal/20030901

• Abstract
• PDF (51.58 KB)

Free Access

Foreword

Avant propos : Hétérogénéités de déformation p. 795

Z. Jasienski and R. Penelle

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal/20030902

• Abstract
• PDF (12.51 KB)

Formation of brass-type shear bands and their influence on orientation changes of Cu-2%Al alloy {112}<111> single crystals p. 797

H. Paul, Z. Jasienski, C. Maurice, A. Piatkowski, J. H. Driver and A. Litwora

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003205

• Abstract
• PDF (240.8 KB)

Deformation mechanisms in an age-hardenable Ni-Mo-Cr alloy subjected to cold rolling p. 807

M. Wróbel, S. Dymek, M. Dollar and M. Blicharski

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003206

• Abstract
• PDF (261.9 KB)

Numerical study of crystalline plasticity: measurements of the heterogeneities due to grain boundaries under small strains p. 815

F. Barbe, S. Forest, S. Quilici and G. Cailletaud

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003207

• Abstract
• PDF (346.9 KB)

Neutron and X-ray diffraction study of Al and Cu during ECA processing and subsequent recrystallization p. 825

J. Kusnierz, T. Baudin, Z. Jasienski and R. Penelle

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003208

• Abstract
• PDF (638.9 KB)

Strain distribution and plastic localization during bending of metal-rubber profiles p. 835

D. Boscher and M. Gaspérini

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003209

• Abstract
• PDF (192.8 KB)

Determination of thermal stresses using grazing incidence X-ray diffraction p. 843

A. Baczmanski, S. J. Skrzypek, K. Wierzbanowski and Ch. Braham

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003210

• Abstract
• PDF (166.8 KB)

Stored energy evolution as a function of cold rolling reduction for a Fe-53%Ni alloy and an austenitic-ferritic steel p. 851

A. L. Etter, M. H. Mathon, T. Baudin and R. Penelle

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003211

• Abstract
• PDF (196.2 KB)

Influence of shear bands on recrystallization of 110[001] Cu single crystals deformed with a change in the direction of plastic flow p. 859

T. Moskalewicz, M. Wróbel, M. Blicharski and S. Dymek

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003212

• Abstract
• PDF (419.6 KB)

Shear banding and the formation of Goss and brass texture components in C-{112}<111> oriented silver single crystals p. 871

H. Paul and J. H. Driver

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003204

• Abstract
• PDF (335.8 KB)

Evolution mechanisms of texture and microstructure during recrystallization of ferritic steel sheets p. 883

H. Réglé

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003108

• Abstract
• PDF (253.5 KB)

High resolution crystal orientation measurement techniques for the study of nucleation processes during recrystallization in heavily deformed metals p. 891

S. Zaefferer

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003213

• Abstract
• PDF (234.4 KB)

Investigation of recrystallization mechanisms in copper alloys p. 903

Ph. Gerber, J. Tarasiuk, Th. Chauveau, R. Chiron and B. Bacroix

Published online: 17 November 2003

DOI: https://doi.org/10.1051/metal:2003214

• Abstract
• PDF (653.0 KB)