Revue de Métallurgie

Free Access

Résumé des articles techniques p. III

Published online: 20 January 2004

DOI: https://doi.org/10.1051/metal/20031201

• Abstract
• PDF (48.83 KB)

Free Access

Foreword

Des déformations déterminées par diffraction aux contraintes résiduelles, un passage moins simple qu’il n’y paraît.. p. 1135

Manuel François

Published online: 20 January 2004

DOI: https://doi.org/10.1051/metal/20031202

• Abstract
• PDF (16.91 KB)

Scale transition models and X-ray stress analysis p. 1137

M. François

Published online: 20 January 2004

DOI: https://doi.org/10.1051/metal:2003182

• Abstract
• PDF (209.4 KB)

Determination of residual stresses in a zirconia layer by X-ray diffraction and by a micromechanical approach: thermoelastic anisotropy effect p. 1151

J-L. Béchade, R. Brenner, P. Goudeau and M. Gailhanou

Published online: 20 January 2004

DOI: https://doi.org/10.1051/metal:2003183

• Abstract
• PDF (64.72 KB)

Mesoscopic residual stresses in hexagonal alloys after uniaxial tensile test p. 1157

D. Gloaguen, M. François, R. Guillen and J. Royer

Published online: 20 January 2004

DOI: https://doi.org/10.1051/metal:2003184

• Abstract
• PDF (50.45 KB)

Residual stresses in alumina-chromium composites: micromechanical analysis and study by X-ray diffraction p. 1163

G. Geandier, P. Weisbecker, S. Denis, A. Hazotte, A. Mocellin, J.-L. Lebrun and E. Elkaim

Published online: 20 January 2004

DOI: https://doi.org/10.1051/metal:2003185

• Abstract
• PDF (226.5 KB)

Intra-phase heterogeneity of stresses in micro-macro models: link with X-ray diffraction measurements p. 1173

R. Brenner, N. Letouzé, J. L. Béchade and O. Castelnau

Published online: 20 January 2004

DOI: https://doi.org/10.1051/metal:2003107

• Abstract
• PDF (63.27 KB)

Study of the mechanical behaviour of zirconium 702α in correlation with the texture determined by X-ray diffraction p. 1179

H. Francillette, A. Gavrus and J-L. Béchade

Published online: 20 January 2004

DOI: https://doi.org/10.1051/metal:2003186

• Abstract
• PDF (231.1 KB)

Influence of a two-phase microstructure on XEC and XRD stress analysis p. 1185

S. Fréour, D. Gloaguen, M. François and R. Guillén

Published online: 20 January 2004

DOI: https://doi.org/10.1051/metal:2003187

• Abstract
• PDF (112.8 KB)

Physical models of microporosity formation during MMC fabrication p. 1193

M. Danis, O. Mantaux and É. Lacoste

Published online: 20 January 2004

DOI: https://doi.org/10.1051/metal:2003188

• Abstract
• PDF (149.4 KB)

Influence of the addition of rare earth metals and of overheating on microstructure and mechanical properties of aluminium alloy A319 p. 1203

A. Saoudi, F. H. Samuel, A. M. Samuel and H. W. Doty

Published online: 20 January 2004

DOI: https://doi.org/10.1051/metal:2003189

• Abstract
• PDF (186.4 KB)

Modelling of magnetization mechanisms in nanocristalline alloys: from theory to experiment p. 1213

O. Geoffroy, L. Fratila, J.-L. Porteseil and T. Waeckerlé

Published online: 20 January 2004

DOI: https://doi.org/10.1051/metal:2003190

• Abstract
• PDF (225.4 KB)

Comparative study of corrosion resistance for 6063 and 3003 aluminium alloys in chloride medium p. 1227

L. Bazzi, R. Salghi, Z. El Alami, E. Ait Addi, S. El Issami, S. Kertit and B. Hammouti

Published online: 20 January 2004

DOI: https://doi.org/10.1051/metal:2003191

• Abstract
• PDF (323.3 KB)