Revue de Métallurgie

Free Access

Résumé des articles techniques p. VII

Published online: 27 September 2005

DOI: https://doi.org/10.1051/metal/20050901

• Abstract
• PDF (48.26 KB)

Coke plant machines automation in Serémange and Dunkerque p. 559

N. Sibille and J. André

Published online: 27 September 2005

DOI: https://doi.org/10.1051/metal:2005173

• Abstract
• PDF (1.685 MB)

Examples of innovative VAI technologies for the iron and steel industry p. 565

L. Gould

Published online: 27 September 2005

DOI: https://doi.org/10.1051/metal:2005179

• Abstract
• PDF (3.050 MB)

Increasing the productivity of the Arcelor Dunkirk continuous casters p. 577

L. Avédian, P. Delfosse, P. Devos, B. Heyman, L. Leszczynski and H. Morand

Published online: 27 September 2005

DOI: https://doi.org/10.1051/metal:2005174

• Abstract
• PDF (327.7 KB)

Continuous Steckel mill improvements at ACESITA p. 583

L. Otavio, D. Berger, G. Djumlija, F. Reiter, A. Marples and K. Berger

Published online: 27 September 2005

DOI: https://doi.org/10.1051/metal:2005175

• Abstract
• PDF (1.927 MB)

SI-FLAT contactless flatness measurement for cold rolling mills and processing lines p. 589

G. Spreitzhofer, A. Duemmler, M. Riess and M. Tomasic

Published online: 27 September 2005

DOI: https://doi.org/10.1051/metal:2005176

• Abstract
• PDF (395.0 KB)

Low temperature cycle before hot rolled strip galvanizing at Arcelor Desvres p. 595

J.-C. Delattre, J.-C. Denquin, B. Denèle, A. Morel and D. Delaunay

Published online: 27 September 2005

DOI: https://doi.org/10.1051/metal:2005168

• Abstract
• PDF (768.3 KB)

Laserwelding of full-hard strip in galvanizing line No. 8 of TKS-CS p. 601

M. Dubke, K. Hüttebräucker and R. Schönenberg

Published online: 27 September 2005

DOI: https://doi.org/10.1051/metal:2005169

• Abstract
• PDF (978.2 KB)

Joining of tubular structures with pre-cutting p. 607

B. Ernotte, Ph. Boeraeve, J. Dehard, J.-Y. Sener, E. Bortolotti and Ph. Zieleman

Published online: 27 September 2005

DOI: https://doi.org/10.1051/metal:2005170

• Abstract
• PDF (1.310 MB)

New steel solution for automotive fuel tanks p. 613

T. lzaki, Y. Sueki, T. Mizuguchi and M. Kurosaki

Published online: 27 September 2005

DOI: https://doi.org/10.1051/metal:2005182

• Abstract
• PDF (1.230 MB)