Revue de Métallurgie

Free Access

Résumé des articles techniques p. III

Published online: 22 May 2007

DOI: https://doi.org/10.1051/metal/20070501

• Abstract
• PDF (77.32 KB)

Free Access

Editorial

Editorial p. 209

E. V. Tsirulnikov and L. Devilliers

Published online: 22 May 2007

DOI: https://doi.org/10.1051/metal:2007123

• Abstract
• PDF (70.86 KB)

Blast furnace optimization, The Next Generation p. 210

J. Hörl, M. Schaler, K. Stohl, I. Piirainen and O. Ritamäki

Published online: 22 May 2007

DOI: https://doi.org/10.1051/metal:2007122

• Abstract
• PDF (10.06 MB)

Stable and efficient blast furnace operation with high PCI and low coke rate at Arcelor Mittal Flat Carbon W-Europe p. 221

G. Dauwels, S. Clairay, E. Hess, J. Janz and J. -L. Eymond

Published online: 22 May 2007

DOI: https://doi.org/10.1051/metal:2007124

• Abstract
• PDF (2.478 MB)

Experiences in recovery of chilled blast furnaces with the help of oxyfuel lances p. 231

J.-E. Van Stein Callenfels and K. Meijer

Published online: 22 May 2007

DOI: https://doi.org/10.1051/metal:2007125

• Abstract
• PDF (2.920 MB)

Thin strip casting conditions for coated products p. 239

R. Nicolle, A. Lamandé, W. Schmitz, R. Leuschner, J. Lauscher, W. Kane-Garcia, A. Grosse, A. Ferraiuolo and G. Porcu

Published online: 22 May 2007

DOI: https://doi.org/10.1051/metal:2007126

• Abstract
• PDF (4.287 MB)

Pipe and tube production in Russia: modern state and future trends p. 250

V. -M. Lavrischev, L. -A. Kondratov and A. -P. Kolikov

Published online: 22 May 2007

DOI: https://doi.org/10.1051/metal:2007127

• Abstract
• PDF (218.0 KB)

Metallurgical quality characterization of nickel-based superalloys p. 258

A. -A. Kazakov and D. -V. Kiselev

Published online: 22 May 2007

DOI: https://doi.org/10.1051/metal:2007128

• Abstract
• PDF (1.095 MB)

Application of the gas-thermal covering for increase of service properties of the metallurgical equipment and metal products p. 263

N. -A. Chichenev, A. -G. Radyuk and A. -E. Titlyanov

Published online: 22 May 2007

DOI: https://doi.org/10.1051/metal:2007129

• Abstract
• PDF (805.2 KB)

Address of the Chairperson of ADEME to the 2006 ATS International Steelmaking Conference p. 267

M. Pappalardo

Published online: 22 May 2007

DOI: https://doi.org/10.1051/metal:2007130

• Abstract
• PDF (213.9 KB)