| Issue |
Rev. Metall.
Volume 110, Number 3, 2013
|
|
|---|---|---|
| Page(s) | 235 - 240 | |
| DOI | https://doi.org/10.1051/metal/2013066 | |
| Published online | 10 June 2013 | |
The world’s first wide and thick amorphous alloy coils produced using a new ultra-rapid cooling transition-controlled large-scale thermal spray gun *
1
Amorphous Alloy Product Development Department, Nakayama Amorphous,
Funamachi
1-1-66, Taisho ward, 551-8551
Osaka,
Japan
2
Kiuchi Laboratory, Shiba 5-30-1-703, Minato ward, 108-0014
Tokyo,
Japan
Received: 30 January 2013
Accepted: 20 March 2013
Amorphous alloys have high tensile strength and easy soft magnetization, and are corrosion-resistant. As conventional amorphous alloy strips are mainly produced by the single rolling method, their thickness is less than 100 µm and their width is less than 200 mm. By combining ultra-rapid cooling, large-scale thermal spraying and warm rolling, the world’s first ever amorphous alloy strips were produced with thickness exceeding 300 µm and width exceeding 300 mm.
Key words: Amorphous alloy / thermal spraying / warm rolling / glass transition
© EDP Sciences 2013
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.