Metallurgical Research & Technology

Experimental study on steelmaking blowing process with O₂ and H₂O top blowing 601

Ziliang Li, Daqiang Cang, Songming Ni and Cheng Ouyang

Published online: 30 August 2016

DOI: https://doi.org/10.1051/metal/2016033

• Abstract
• PDF (788.9 KB)
• References

Nanoindentation studies of Zr₅₀Cu₅₀ metallic glass thin film nanocomposites via molecular dynamics simulations 602

Ashwani Kumar, Pradeep Gupta and Natraj Yedla

Published online: 30 August 2016

DOI: https://doi.org/10.1051/metal/2016034

• Abstract
• PDF (4.173 MB)
• References

Free Access

DEM simulation of particle descending velocity distribution in the reduction shaft furnace 603

Kuan Xu and Ming-hua Bai

Published online: 30 August 2016

DOI: https://doi.org/10.1051/metal/2016035

• Abstract
• PDF (4.624 MB)
• References

The influence of iron level on corrosion of high-pressure die-cast LM24 alloy 604

Ehsan Rahimi, George E. Thompson, Geoff M. Scamans and Z. Fan

Published online: 30 August 2016

DOI: https://doi.org/10.1051/metal/2016036

• Abstract
• PDF (8.718 MB)
• References

Process optimization of yellow gypsum synthesized from LD Slag fines – an opportunity for value addition of LD Slag 605

Shrenivas Ashrit, Ravikrishna V. Chatti, K. N. Udpa, R. Venugopal and Udayabhanu G. Nair

Published online: 30 August 2016

DOI: https://doi.org/10.1051/metal/2016037

• Abstract
• PDF (627.4 KB)
• References

The use of ladle furnace slag for the removal of hexavalent chromium from an aqueous solution 606

Ankica Rađenović, Gordana Medunić and Tahir Sofilić

Published online: 30 August 2016

DOI: https://doi.org/10.1051/metal/2016040

• Abstract
• PDF (1.296 MB)
• References

Partition of valuable components between slag and metal in the blast furnace operating with high chromium, vanadium, titanium, magnetite ores 607

Zhanwei He, Jianxing Liu, Songtao Yang, He Yang and Xiangxin Xue

Published online: 30 August 2016

DOI: https://doi.org/10.1051/metal/2016041

• Abstract
• PDF (2.202 MB)
• References

Technological intervention for continuously cast billet of martensitic stainless ultra high strength steel 608

Yongli Chen and Xuejiao Zhou

Published online: 30 August 2016

DOI: https://doi.org/10.1051/metal/2016045

• Abstract
• PDF (1.038 MB)
• References

Experimental study of molten metal flow and numerical simulation of magnetic field during permanent magnet stirring and its application in continuous casting 609

Jie Zeng, Weiqing Chen and Senlin Zhang

Published online: 19 September 2016

DOI: https://doi.org/10.1051/metal/2016047

• Abstract
• PDF (3.396 MB)
• References

Review of research status and development direction of dieless drawing 610

Kai-Song Li, Xue-Feng Liu and Zhang-Zhi Shi

Published online: 19 September 2016

DOI: https://doi.org/10.1051/metal/2016042

• Abstract
• PDF (947.5 KB)
• References

Cryogenic heat treatment of the ferrous materials – a review of the current state 611

Kamran Amini, Amin Akhbarizadeh and Sirus Javadpour

Published online: 22 September 2016

DOI: https://doi.org/10.1051/metal/2016049

• Abstract
• PDF (1.492 MB)
• References

Effects of carbon content on the sintering behavior of low-titanium vanadium-titanium magnetite 612

Mi Zhou, Song-Tao Yang, Tao Jiang, Li-heng Zhang, Jin-tao Xiao, Xiangxin Xue and Wei-jun Zhang

Published online: 21 October 2016

DOI: https://doi.org/10.1051/metal/2016048

• Abstract
• PDF (2.413 MB)
• References