Metallurgical Research & Technology

Improvement of strength of carbon-bearing pellets containing magnesium oxide 101

Song-Zhang, Wei-Ren, Jin-lian Li and Xiaofang Zhang

Published online: 26 October 2016

DOI: https://doi.org/10.1051/metal/2016028

• Abstract
• PDF (1003 KB)
• References

Fatigue life assessment for material containing defects under multiaxial loading 102

A. Nasr, Y. Nadot, Ch. Bouraoui and R. Fathallah

Published online: 26 October 2016

DOI: https://doi.org/10.1051/metal/2016060

• Abstract
• PDF (1.229 MB)
• References

Experimental research on the flow instability and level fluctuation in continuous thin slab casting mould 103

Liqin Jin, Jian Cheng and Houfa Shen

Published online: 26 October 2016

DOI: https://doi.org/10.1051/metal/2016055

• Abstract
• PDF (1.598 MB)
• References

Study on the effects of catalyst on combustion characteristics of pulverized coal 104

Zhanxia Di, Tiejun Chun, Hongming Long, Qingmin Meng, Ping Wang and Jialong Yang

Published online: 26 October 2016

DOI: https://doi.org/10.1051/metal/2016054

• Abstract
• PDF (1.649 MB)
• References

Influence of beneficiated sinter grade iron ore fines size on sinter productivity and quality 105

Umadevi Tekkalakote, Brahmacharyulu Angalakuditi, Rameshwar sah, Marutiram Kaza and Pradipta chandra Mahapatra

Published online: 18 November 2016

DOI: https://doi.org/10.1051/metal/2016050

• Abstract
• PDF (2.978 MB)
• References

Precipitation of (Zr, Hf)C in FeCrAlYHfZr alloys during electroslag remelting process 106

Ying Ren, Lifeng Zhang and Le Yu

Published online: 18 November 2016

DOI: https://doi.org/10.1051/metal/2016046

• Abstract
• PDF (2.457 MB)
• References

Comparative creep behaviour study between single crystal Nickel and ultra-fine grained nano crystalline Nickel in presence of porosity at 1120 K temperature 107

Md. Meraj and Snehanshu Pal

Published online: 18 November 2016

DOI: https://doi.org/10.1051/metal/2016061

• Abstract
• PDF (3.874 MB)
• References

Effect of addition of Al-based slag deoxidizer on MgO.Al₂O₃ inclusions in 3Si-Fe steels 108

Ying Ren, Lifeng Zhang and Wen Fang

Published online: 18 November 2016

DOI: https://doi.org/10.1051/metal/2016043

• Abstract
• PDF (827.7 KB)
• References

Influence of RH degassing on cleanness and fatigue life of 60Si2MnA spring steel 109

Yang Hu, Weiqing Chen, Huaibin Han and Ruijuan Bai

Published online: 18 November 2016

DOI: https://doi.org/10.1051/metal/2016059

• Abstract
• PDF (3.489 MB)
• References

Characteristic and evolution of inclusions in Al-Killed titanium alloyed steel during air contact process 110

Min Wang, Yan-ping Bao, Dieter Senk and Chao-jie Zhang

Published online: 18 November 2016

DOI: https://doi.org/10.1051/metal/2016057

• Abstract
• PDF (3.804 MB)
• References

Effect of snorkel shape and number of nozzles on mixing phenomena in the RH process by physical modeling 111

Haitao Ling, Changbo Guo, Alberto N. Conejo, Fei Li and Lifeng Zhang

Published online: 18 November 2016

DOI: https://doi.org/10.1051/metal/2016058

• Abstract
• PDF (2.874 MB)
• References

Indirect determination of equilibrium distribution of V and Cr between liquid slag and solid iron at 1653 K and 101.3 kPa 112

Jiang Diao, Quan Zhang, Xuan Liu, Lian Chen and Bing Xie

Published online: 24 November 2016

DOI: https://doi.org/10.1051/metal/2016051

• Abstract
• PDF (910.3 KB)
• References

Comparison of 2D and 3D morphology of non-metallic inclusions in steel using different methods 113

Xuewei Zhang, Lifeng Zhang, Wen Yang, Ying Zhang, Ying Ren and Yuanchi Dong

Published online: 24 November 2016

DOI: https://doi.org/10.1051/metal/2016056

• Abstract
• PDF (2.103 MB)
• References

Effect of Cr₂O₃ on the properties of stainless steel refining slags and desulfurization 114

Liuyi Li, Guoguang Cheng, Bin Hu, Cheng-shun Wang and Guoyu Qian

Published online: 08 December 2016

DOI: https://doi.org/10.1051/metal/2016044

• Abstract
• PDF (2.557 MB)
• References

The nanoscale pore characteristics of coking coals: Part 1 – Optimization of the experimental conditions and calculation methods of specific surface area and micropore volume 115

Huan Cheng, Qi Wang and Song Zhang

Published online: 08 December 2016

DOI: https://doi.org/10.1051/metal/2016052

• Abstract
• PDF (146.5 KB)
• References

The nanoscale pore characteristics of coking coals: Part 2 – Optimization of the experimental conditions and calculation methods of pore size distribution 116

Huan Cheng, Qi Wang and Song Zhang

Published online: 12 December 2016

DOI: https://doi.org/10.1051/metal/2016053

• Abstract
• PDF (1.545 MB)
• References

The nanoscale pore characteristics of coking coals: Part 3 – Variations in pore characteristics of coking coals with various ranks 117

Huan Cheng, Qi Wang and Song Zhang

Published online: 02 February 2017

DOI: https://doi.org/10.1051/metal/2016074

• Abstract
• PDF (1.109 MB)
• References

Under-solidus austenite grain growth and transverse cracking in hypoperitectic carbon steel 118

Rudolf Mišičko, Martin Fujda, Sandra Ahmidat Fedáková, Vladimír Masek, Jaroslav Duška and Miloš Matvija

Published online: 17 February 2017

DOI: https://doi.org/10.1051/metal/2016068

• Abstract
• PDF (4.145 MB)
• References

Laboratory study of CaCO₃ decomposition, influence of BOF converter slag 119

H. Lu, C.-X. Li, W.-W Mao and H. Li

Published online: 17 February 2017

DOI: https://doi.org/10.1051/metal/2016070

• Abstract
• PDF (1.331 MB)
• References

Study of the relationship (stress – temperature) in a CuAlBe shape memory single crystal 120

Mostepha Benchiheub, Saida Chouf and Soliman Belkahla

Published online: 17 February 2017

DOI: https://doi.org/10.1051/metal/2016075

• Abstract
• PDF (1.228 MB)
• References