Subscriber Authentication Point

Volume 114 / No 2 (2017)

Export the citation of the selected articles Export
Select all

Metallurgical Research & Technology

Volume 114 / No 2 (2017)

An environmental friendly Coal-Ca(OH)₂-NaOH roasting decomposition strategy for Bayan Obo tailings 201

Qiang Zheng, Xue Bian and Wen-Yuan Wu

Published online: 27 March 2017

DOI: https://doi.org/10.1051/metal/2017010

Processing of twin-roll cast thin AlFeSi strips for the manufacture of aluminium finstock 202

Yucel Birol

Published online: 24 March 2017

DOI: https://doi.org/10.1051/metal/2017008

Super-hydrophobic coating used in corrosion protection of metal material: review, discussion and prospects 203

Cao Zhan-Fang, Qiu Pei, Chen Pei, Wen Xin, Liu Guang-Yi, Wang Shuai and Zhong Hong

Published online: 24 March 2017

DOI: https://doi.org/10.1051/metal/2017011

Study on liquid phase formation and fluidity of iron ores 204

Lu Yao, Shan Ren, Xiaoqing Wang, Qingcai Liu, Jianliang Zhang and Buxin Su

Published online: 12 April 2017

DOI: https://doi.org/10.1051/metal/2016062

Influence of basicity and MgO/Al₂O₃ ratio on the viscosity of blast furnace slags containing chloride 205

Cui Wang, Jianliang Zhang, Kexin Jiao and Zhengjian Liu

Published online: 12 April 2017

DOI: https://doi.org/10.1051/metal/2016064

Thermal stability of primary elongated V-rich carbonitrides in H13 tool steel 206

You Xie, Guoguang Cheng, Xiaoling Meng and Yu Huang

Published online: 12 April 2017

DOI: https://doi.org/10.1051/metal/2016072

Three different methods for smelting treatment of stainless steel dust 207

Yanling Zhang, Tuo Wu, Xinlei Jia and Wenming Guo

Published online: 12 April 2017

DOI: https://doi.org/10.1051/metal/2017002

Effect of proeutectoid carbide on heredity in microstructure-mechanical properties and fatigue life of GCr15 bearing steel 208

Huaibin Han, Xianming Zhao, Xiaoyu Zhao, Changjie Wan and Wei Wang

Published online: 12 April 2017

DOI: https://doi.org/10.1051/metal/2017009

Potential of horizontal direct chill cast EN AW 6082 rods as forging stock in the manufacture of light weight suspension components 209

Yucel Birol, Emre Gokcil and Seracettin Akdi

Published online: 17 April 2017

DOI: https://doi.org/10.1051/metal/2017024

Residual thickness of carbon brick calculation model and systematic analysis of heat transfer 210

Yong Deng, Jianliang Zhang and Kexin Jiao

Published online: 13 April 2017

DOI: https://doi.org/10.1051/metal/2017012

Formation of MgO-based inclusions during AOD and ladle treatment of Al-killed 2205 duplex stainless steel 211

Zongxu Pang, Rong Zhu, Peidun Chen and Zhen Wang

Published online: 17 April 2017

DOI: https://doi.org/10.1051/metal/2017028

A novel approach for flotation recovery of molybdenite, galena and pyrite from a complex molybdenum-lead ore 212

Zhanfang Cao, Yajun Yue, Hong Zhong, Pei Qiu, Pei Chen, Xin Wen, Shuai Wang and Guangyi Liu

Published online: 24 April 2017

DOI: https://doi.org/10.1051/metal/2016063

Friction-stir processing of Al–12%Si alloys: grain refinement, numerical simulation, microstructure evolution, dry sliding wear performance and hardness measurement 213

Morteza Shamanian, Hossein Mostaan, Mehdi Safari and Mohammad Sefidkar Dezfooli

Published online: 24 April 2017

DOI: https://doi.org/10.1051/metal/2016066

Processing, microstructure and mechanical properties of a TiO₂ nanoparticles reinforced magnesium for biocompatible application 214

Syed Fida Hassan, Olalekan Ogunlakin Nasirudeen, Nasser Al-Aqeeli, Nouari Saheb, Faheemuddin Patel and Mirza Murtuza Ali Baig

Published online: 05 May 2017

DOI: https://doi.org/10.1051/metal/2017015

Recovery of blast furnace grade iron ore concentrate from iron ore rejects 215

Dilip Makhija, Prashant Dixit and A.K. Mukherjee

Published online: 15 May 2017

DOI: https://doi.org/10.1051/metal/2016069

Microstructure and mechanical property in a high strength high-Al–low-Si hot-dip galvanized dual phase steel 216

Yonggang Deng, Hongshuang Di, Meiyuan Hu, Jiecen Zhang and R.D.K. Misra

Published online: 23 May 2017

DOI: https://doi.org/10.1051/metal/2017013