Subscriber Authentication Point

EDPS Account

Volume 114 / No 3 (2017)

Metallurgical Research & Technology

Volume 114 / No 3 (2017)

Export the citation of the selected articles Export
Select all

A coupled thermal decomposition model for coal particle pyrolysis 301

Ruiling Du, Keng Wu, Daan Xu, Li Zhang and Changyao Chao

Published online: 23 May 2017

DOI: https://doi.org/10.1051/metal/2017016

Superplastic Pd₅₀Pt₅₀ monocrystalline bimetallic alloy nanowire: a molecular dynamics simulation study 302

Jay Krishan, Pradeep Gupta, Karthik Vaduganathan and Natraj Yedla

Published online: 23 May 2017

DOI: https://doi.org/10.1051/metal/2016067

Prediction of columnar-to-equiaxed transition and porosity in continuous cast billet 303

Qi-Peng Dong, Jiong-ming Zhang and Xin-kai Zhao

Published online: 30 May 2017

DOI: https://doi.org/10.1051/metal/2017004

Thermodynamic assessment of Al₂O₃–SiO₂–Ce₂O₃ system 304

Yandong Li, Chengjun Liu, Tongsheng Zhang, Maofa Jiang and Cheng Peng

Published online: 23 May 2017

DOI: https://doi.org/10.1051/metal/2017001

Influence of adding Sewage Sludge instead of Coal Powder in the sintering process 305

Xiaoqing Wang, Qingcai Liu, Lijun Jiang, Lu Yao, Jian Yang, Ronggui Zhang and Shan Ren

Published online: 23 May 2017

DOI: https://doi.org/10.1051/metal/2017006

Influence of Mg/Ti complex addition on evolution and thermodynamics of the inclusion in Al-killed steel 306

Tongsheng Zhang, Yandong Li, Haoyuan Mu, Chengjun Liu and Maofa Jiang

Published online: 30 May 2017

DOI: https://doi.org/10.1051/metal/2017021

Physico-chemical investigations of high iron bauxite for application of refractive and ceramics 307

Bikash R. Parhi, Santosh K. Sahoo, Manish Sahu, Bibhu D. Bishoyi, Subash C. Mishra, Bhagyadhar Bhoi and Bhagirath Mishra

Published online: 30 May 2017

DOI: https://doi.org/10.1051/metal/2017025

Modeling transient evolution of inclusion in Si-Mn-killed steels during the ladle mixing process 308

Ying Zhang, Ying Ren and Lifeng Zhang

Published online: 02 June 2017

DOI: https://doi.org/10.1051/metal/2017035

Effect of AlTi6 grain refiner on morphology, corrosion and mechanical properties of the commercial purity AA1050 aluminum alloy 309

Shereen M.S. Abdelhamied

Published online: 02 June 2017

DOI: https://doi.org/10.1051/metal/2017007

Thermogravimetric analysis of LD slag waste fines in the range of 0–6 mm and establishing the correlation between free lime and weight loss of LD slag fines 310

Shrenivas Ashrit, Pradip K. Banerjee, Udayabhanu G. Nair and Venugopal Rayasam

Published online: 13 June 2017

DOI: https://doi.org/10.1051/metal/2017023

Application of a chamfered slab technology to reduce straight edge seam defects of non-oriented silicon electrical steel generated during flexible thin slab casting process 311

Nanfu Zong, Yang Liu, Hui Zhang and Xiaojiang Yang

Published online: 13 June 2017

DOI: https://doi.org/10.1051/metal/2016073

Effects of post-weld heat treatment temperature on the microstructure and mechanical properties of welded A517-Gr.B steel by SMAW method 312

Nazem Habibpour, Ali Shafyei, Reza Amini Najafabadi and Amirhossein Meysami

Published online: 13 June 2017

DOI: https://doi.org/10.1051/metal/2017032

Mécanismes de durcissement structural des alliages plomb-cadmium-strontium-étain pour grilles de batterie 313

Youssef Ait Yassine, Soukaina Saissi, Elhassan Zentalla, Abedellah Aguizir, Elmadani Saad, Amina Ibnlfassi, Latifa Zerrouk, Najim Selhaoui and Lahcen Bouirden

Published online: 13 June 2017

DOI: https://doi.org/10.1051/metal/2016071

Phase diagram calculation and analyze on cast high vanadium wear-resistant alloy 314

Yong-wei Yang, Han-guang Fu, Jiang Ju, Yong-ping Lei, Li-long Zhu and Liang Jiang

Published online: 13 June 2017

DOI: https://doi.org/10.1051/metal/2017003