Subscriber Authentication Point

EDPS Account

Volume 114 / No 4 (2017)

Metallurgical Research & Technology

Volume 114 / No 4 (2017)

Export the citation of the selected articles Export
Select all

Simultaneous formation of inter- and intragranular ferrite in microalloyed steels studied by modeling and experiment 401

Huasong Liu, Chenwei Du, Peng Lan, Haiyan Tang, Chengjia Shang and Jiaquan Zhang

Published online: 16 June 2017

DOI: https://doi.org/10.1051/metal/2017005

Effects of Acidithiobacillus ferrooxidans and Fe(III) on pyrite–pyrolusite bioleaching process 402

Yali Feng, Jinxing Kang, Haoran Li, Xu Zhang, Xiangyi Deng, Min Sun and Xipei Chen

Published online: 16 June 2017

DOI: https://doi.org/10.1051/metal/2017022

Utilization of semi-coke in iron making technologies in China 403

Qingli Tang, Jianliang Zhang, Jianbo Zhong, Kejiang Li, Bing Gao, Zhe Wang, Runsheng Xu, Guangwei Wang and Zhengjian Liu

Published online: 16 June 2017

DOI: https://doi.org/10.1051/metal/2017031

Solvent extraction: fundamental equilibrium studies of neodymium and DEHPA 404

Christiane Scharf and André Ditze

Published online: 26 June 2017

DOI: https://doi.org/10.1051/metal/2017017

Reducing macro segregation of high carbon steel in continuous casting bloom by final electromagnetic stirring and mechanical soft reduction integrated process 405

Hanghang An, Yan Ping Bao, Min Wang and Li Hua Zhao

Published online: 23 June 2017

DOI: https://doi.org/10.1051/metal/2017029

A comparative analysis of the dissolution kinetics of lead from low grade oxide ores in HCl, H₂SO₄, HNO₃ and citric acid solutions 406

Asghar Azizi and Seyed Mahyar Seyed Ghasemi

Published online: 03 July 2017

DOI: https://doi.org/10.1051/metal/2017014

High-temperature wear behavior of laser-clad composite coatings deposited on Ti6Al4V substrates 407

Rui Song, Jun Li, Jin-Zhong Shao, Lv-Lin Bai and Jia-Li Chen

Published online: 03 July 2017

DOI: https://doi.org/10.1051/metal/2017018

Contribution rates of constituent phases to macro-stress and -strain of two-phase titanium alloy 408

Guo-xing Chen, Yan Peng, Bao-dong Shi and Lu-han Hao

Published online: 03 July 2017

DOI: https://doi.org/10.1051/metal/2017034

Solidification interface transformation and solute redistribution of FeCrAl stainless steel 409

Jianhua Liu, Xiaofeng Su, Hongbo Liu, Zhibiao Han, Yang He and Shengtao Qiu

Published online: 03 July 2017

DOI: https://doi.org/10.1051/metal/2017019

Effect of yttrium on the microstructures and inclusions of EH36 shipbuilding steel 410

Yan-chong Yu, Hao Li and She-bin Wang

Published online: 03 July 2017

DOI: https://doi.org/10.1051/metal/2017027

Effect of slag on strength of direct reduced iron produced with dust briquettes 411

Shiqin Li, Xiaojun Ning, Jianliang Zhang, Zhengjian Liu, Xiang Yuan, Fei Wang and Ziluo Chen

Published online: 03 July 2017

DOI: https://doi.org/10.1051/metal/2017044

Dynamic tracking prediction control of exit strip thickness based on improved fractal 412

Lijie Sun, Cheng Shao and Li Zhang

Published online: 03 July 2017

DOI: https://doi.org/10.1051/metal/2017036

Application of chamfered narrow face mold technology to reduce longitudinal surface crack defects of hyperperitectic steel generated during flexible thin slab casting process 413

Nanfu Zong, Yang Liu and Hui Zhang

Published online: 28 July 2017

DOI: https://doi.org/10.1051/metal/2017030

Material deformation in equal channel forward extrusion process 414

Sobhan Alah Nazari Tiji, Ali Asgari and Faramarz Djavanroodi

Published online: 28 July 2017

DOI: https://doi.org/10.1051/metal/2017040

Effect of compositions and additives content on crystallization behavior of Ti-rich phase from Ti-bearing blast furnace slag 415

Shan Ren, Fuqiang Guo, Jian Zhou, Jie Yang, Lu Yao and Ming Kong

Published online: 28 July 2017

DOI: https://doi.org/10.1051/metal/2017039

Inoculant enhancer to increase the potency of Ca-FeSi alloy in ductile cast iron 416

Iulian Riposan, Valentin Uta and Stelian Stan

Published online: 31 July 2017

DOI: https://doi.org/10.1051/metal/2017041