| Issue |
Metall. Res. Technol.
Volume 114, Number 6, 2017
|
|
|---|---|---|
| Article Number | 609 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/metal/2017070 | |
| Published online | 05 October 2017 | |
Regular Article
Effect of dew point during heating on selective oxidation of TRIP steels
1
Shougang Research Institute of Technology,
Beijing, PR China
2
Beijing key Laboratory of Green Recyclable Process for Iron & steel Production Technology,
Beijing, PR China
* Corresponding author: guangrui82@qq.com
Received:
3
July
2017
Received in final form:
31
July
2017
Accepted:
5
September
2017
The influence of dew point during heating on the selective oxidation behavior of two kinds of transformation-induced plasticity (TRIP) steel was studied by means of a hot dip process simulator. The selective oxidation behavior of alloying elements on the surface was studied by glow discharge optical emission spectroscopy (GDOES) and scanning electron microscopy (SEM). For the Al-bearing TRIP steel, less Al-rich oxides were found on the steel surface and there was less Mn on the surface when the dew point during heating was much low. On the contrary, for the Si-bearing TRIP steel, more film-like Si-rich oxides were found on the steel surface and there was more Mn on the surface when the dew point during heating was low.
Key words: selective oxidation / dew point / heating / TRIP steel / oxides
© EDP Sciences, 2017
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.