Metallurgical Research & Technology

Effect of heat treatment on mechanical properties of low-alloy steel/nickel-based welding material dissimilar welded joint 101

Zhichao Bian, Yi Tu, Haoran Ding, Hao Liu and Jian Peng

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025100

• Abstract
• Full HTML
• PDF (10.22 MB)
• References

Effects of prolonged retrogression and re-aging (RRA) heat treatment on the corrosion and electrochemical behavior of AA7075 alloy 102

Muhammad Ali Siddiqui, Syed Amir Iqbal, Amna Saher, Afreen Alam, Hania Shahzad and M. Haram Zulfi

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025099

• Abstract
• Full HTML
• PDF (2.519 MB)
• References

Numerical simulation of the effects of lance velocity and immersion depth on slag-iron flow in the flash ironmaking pool 103

Lei Guo, Jinchi Tan, Guolong Gao, Zhang-ao Huo, Haibin Zuo, Zushu Li and Zhancheng Guo

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025098

• Abstract
• Full HTML
• PDF (7.284 MB)
• References

Study on the influence and control mechanism of solution treatment on the microstructure and properties of AZ31B magnesium alloy laser welded joints 104

Yu-lang Xu, Zhengfeng Wu, Gai Zhao, Hong-quan Zhao, Xian-rui Zhao, Qiang-yong Zhang, De-yin Li, Zhan-jiang Li and Deng-guang Xiao

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025097

• Abstract
• Full HTML
• PDF (4.525 MB)
• References

Numerical simulation study of solid–liquid phase transformation and heat transfer process of iron ore particle 105

Shushi Zhang, Dewen Jiang, Xinfu Zhou, Zhenyang Wang, Jianliang Zhang and Song Zhang

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025102

• Abstract
• Full HTML
• PDF (2.652 MB)
• References

Simulation of abradable coatings compositions through microstructure image modeling 106

Azmeera Anitha Kumari, Prakash Jadhav and Chhaya Lande

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025101

• Abstract
• Full HTML
• PDF (6.941 MB)
• References

Kinetic study of CO generation reaction in microwave-assisted carbon thermal desulfurization process 107

Lingyi Meng, Yan Shi, Jianxiong Wang, Hu Changqing, Guangqing Yang and Jianshuang Liu

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025103

• Abstract
• Full HTML
• PDF (505.7 KB)
• References

Production of intermetallic-dominant Al–Fe–Si alloys via additive methods from scrap-based feedstock 108

Violetta A. Andreyachshenko

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025107

• Abstract
• Full HTML
• PDF (1.024 MB)
• References

Corrosion behavior of laser powder bed fusion duplex stainless steel in soil simulated solution: effect of SO₄²⁻ concentration 109

Yunxiang Chen, Deyuan Lin, Yiyang Chen, Xiaojian Xia, Yiliang Lu and Qiang Zhang

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025104

• Abstract
• Full HTML
• PDF (5.823 MB)
• References

Investigation of the microstructure, hardness and corrosion behavior of AISI 4340 steel subjected to pack boronizing process 110

Bünyamin Yamanel

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025106

• Abstract
• Full HTML
• PDF (14.39 MB)
• References

Fatigue-tensile characterization and development of an ANN model for low cycle fatigue life prediction of dual phase steel under the influence of prestraining 111

Tanmoy Majumder, Goutam Mukhopadhyay and Poulami Maji

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025105

• Abstract
• Full HTML
• PDF (6.280 MB)
• References

Review

Advances in friction stir welding of titanium alloys: a comprehensive review 112

Arumugam Perumal, Shanmugam Suresh Kumar, Rajaram Prithivirajan, Kannan Thavasilingam and Lakshmana Pandian Prakash

Published online: 13 January 2026

DOI: https://doi.org/10.1051/metal/2025109

• Abstract
• Full HTML
• PDF (6.552 MB)
• References

Study on cup forming of copper-containing austenitic stainless steel at low temperatures 113

Jie Li, Qi Wang, Jinkang Sun, Guanghui Zhao, Juan Li and Huaying Li

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025113

• Abstract
• Full HTML
• PDF (15.71 MB)
• References

Recovery of nickel, cobalt and copper from nickel slag by a new process of reduction-sulfurizing smelting 114

Bin gang Lu, Ting Zhang, Wen bo Guo, Peng feng Wu, Yu tian Ma, Xiao dong Ma and Ying ying Shen

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025114

• Abstract
• Full HTML
• PDF (6.070 MB)
• References

Investigation on microstructural evolution and surface integrity of Ti-6Al-4V alloy machined using WC nanoparticle-enhanced powder-suspended EDM 115

Elaiyarasan Uthirapathi, Shanthos Kumar Ganesan, Visagan Arjunan, Elangovan Theerthamalai and Putti Venkata Siva Teja

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025108

• Abstract
• Full HTML
• PDF (6.539 MB)
• References

Valence evolution of samarium in magnesium-driven reduction of SmF₃ 116

Donghui Liu, Yulin Chen, Han Huang, Houqing Wang, Bin Zeng, Kai Sun and Kuifang Zhang

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025111

• Abstract
• Full HTML
• PDF (6.973 MB)
• References

Metallurgical investigations on optimized tensile strength of Yb fiber laser welded Incoloy 800 joints 117

Seenivasan Sankara Subramanian, Varahamoorthi Raju, Saravanan Paramasivam and Lakshmanan Selvarajan

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025110

• Abstract
• Full HTML
• PDF (11.39 MB)
• References

Dynamic endpoint forecasting in BOF process: a JITL-BP approach integrated with steel grade coding 118

Xiao-feng Qiu, Jian Yang, Maohui Zou, Han Sun and Yun-tong Li

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025120

• Abstract
• Full HTML
• PDF (5.137 MB)
• References

Effect of protein adsorption on corrosion and biocompatibility, and antibacterial activity of 3D-printing titanium alloys 119

Liyan Ma

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025122

• Abstract
• Full HTML
• PDF (1.784 MB)
• References

Judgment model for copper converter blowing stages based on weighted fusion strategy 120

Huibin Shi, Daofei Zhu and Rui Fang

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025118

• Abstract
• Full HTML
• PDF (4.336 MB)
• References

BOF endpoint forecasting via informer architecture for multivariate time series data 121

Xiaofeng Qiu, Jian Yang, Han Sun, Maohui Zou and Yuntong Li

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025119

• Abstract
• Full HTML
• PDF (7.277 MB)
• References

Influence of heat treatment on microstructure, texture and mechanical properties of a selective laser melted AlSi10Mg alloy 122

Xiaofeng Wang, Wei Tan, Guangming Feng, Yagang Liu and Mingxing Guo

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025123

• Abstract
• Full HTML
• PDF (9.619 MB)
• References

Effect of yttrium addition on inclusion formation in 0.5C-1Cr-0.2Mo-0.1V spring steel: thermodynamic and experimental analyses 123

Hebin Wang, Mengran Zhou, Jiasheng Ge, Ping Ou, Shengci Li, Tonghan Yang, Ming Chen, Wei Zhang, Hongwei Li, Chaobin Lai and Xiaogang Yang

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025121

• Abstract
• Full HTML
• PDF (6.034 MB)
• References

Effect of fluid flow velocity on CO₂/H₂S corrosion mechanism in X65 carbon steel pipelines 124

Mohamad Ali Farzaneh, Masoud Panjehpour and Mahmood Meratian

Published online: 09 January 2026

DOI: https://doi.org/10.1051/metal/2025125

• Abstract
• Full HTML
• PDF (6.251 MB)
• References