Open Access
| Issue |
Metall. Res. Technol.
Volume 120, Number 5, 2023
|
|
|---|---|---|
| Article Number | 509 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/metal/2023067 | |
| Published online | 03 October 2023 | |
- M.H.F.J. Humphreys, Recrystallisation and related annealing phenomena, 2nd ed., Elsevier Ltd, 2004 [Google Scholar]
- H.S. Zurob, C.R. Hutchinson, Y. Bréchet et al., Modeling recrystallization of microalloyed austenite: effect of coupling recovery, precipitation and recrystallization, Acta Mater. 50, 3077–3094 (2002) [CrossRef] [Google Scholar]
- C. Hutchinson, H. Zurob, C. Sinclair et al., The comparative effectiveness of Nb solute and NbC precipitates at impeding grain-boundary motion in Nb steels, Scr. Mater. 59, 635–637 (2008) [CrossRef] [Google Scholar]
- M. Bellavoine, M. Dumont, J. Drillet et al., Combined effect of heating rate and microalloying elements on recrystallisation during annealing of dual-phase steels, Metall. Mater. Trans. A. 49, 2865–2875 (2018) [CrossRef] [Google Scholar]
- N. Mavrikakis, C. Detlefs, P.K. Cook et al., A multi-scale study of the interaction of Sn solutes with dislocations during static recovery in α-Fe, Acta Mater. 174, 92–104 (2019) [CrossRef] [Google Scholar]
- N. Mavrikakis, W. Saikaly, D. Mangelinck et al., Segregation of Sn on migrating interfaces of recrystallisation: quantification through APT measurements and comparison with the solute drag theory, Mater. 9, 100541 (2020) [Google Scholar]
- I.L. Dillamore, H. Katoh, The mechanisms of recrystallization in cubic metals with particular reference to their orientation-dependence, Met. Sci. 8, 73–83 (1974) [CrossRef] [Google Scholar]
- C. Philippot, M. Bellavoine, M. Dumont et al., Influence of heating rate on ferrite recrystallization and austenite formation in cold-rolled microalloyed dual-phase steels, Met. Mater.Trans. A 49A, 66–77 (2018) [CrossRef] [Google Scholar]
- M. Verdier, Y. Brechet, P. Guyot, Recovery of AlMg alloys: flow stress and strain-hardening properties, Acta Mater. 47, 127–134 (1998) [CrossRef] [Google Scholar]
- J.W. Cahn, The impurity-drag effect in grain boundary motion, Acta Metall. 10, 789–798 (1962) [CrossRef] [Google Scholar]
- J.T. Busby, M.C. Hash, G.S. Was, The relationship between hardness and yield stress in irradiated austenitic and ferritic steels, J. Nucl. Mater. 336, 267–278 (2005) [CrossRef] [Google Scholar]
- B. Bacroix, J. Schneider, A. Franke, Evolution of recrystallization texture in non-oriented electrical steels during final annealing − influence of shear stress after cold rolling, J. Phys.: Conf. Ser. 1270, 012007 (2019) [CrossRef] [Google Scholar]
- F. Arieta, C. Sellars, Activation volume and activation energy for deformation of Nb HSLA steels, Scr. Metall. Mater. 30, 707–712 (1994) [CrossRef] [Google Scholar]
- C.W. Sinclair, C.R. Hutchinson, Y. Bréchet, The effect of Nb on the recrystallisation and grain growth of ultra-high-purity α-Fe: a combinatorial approach, Metall. Mater. Trans. A. 38, 821–830 (2007) [CrossRef] [Google Scholar]
- P.O. Rossi, C.M. Sellars, Quantitative metallography of recrystallisation, Acta Mater. 45, 137–148 (1997) [CrossRef] [Google Scholar]
- N. Mavrikakis, W. Saikaly, P.R. Calvillo et al., How Sn addition influences texture development in single-phase Fe alloys: correlation between local chemical information, microstructure and recrystallisation, Mater. Charact. 190, 112072 (2022) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.