EDP Sciences logo
Subscriber Authentication Point
Search
Menu
All issues Volume 121 / No 6 (2024) Metall. Res. Technol., 121 6 (2024) 604 References
Free Access
Issue
Metall. Res. Technol.
Volume 121, Number 6, 2024
Article Number 604
Number of page(s) 10
DOI https://doi.org/10.1051/metal/2024074
Published online 01 November 2024
  1. D. Chen, G. Wang, H. Liu, The significance of hot rolled microstructure controlled by fine-tuning Al content to texture evolution and magnetic properties of low silicon non-oriented electrical steels, J. Magn. Magn. Mater. 528, 167740 (2021) [CrossRef] [Google Scholar]
  2. Y.X. Zhang, M.F. Lan, Y. Wang et al., Microstructure and texture evolution of thin-gauge non-oriented silicon steel with high permeability produced by twin-roll strip casting, Mater. Character. 150, 118 (2019) [CrossRef] [Google Scholar]
  3. L. Fan, M. Qin, E. Yue et al., Technological challenges of new energy vehicle to non-oriented silicon steel, Mater. Rev. 35, 15183 (2021) [Google Scholar]
  4. D. Hawezy, The influence of silicon content on physical properties of non-oriented silicon steel, Mater. Sci. Technol. 33, 1560 (2017) [CrossRef] [Google Scholar]
  5. Y. Zhang, X.G. Yuan, Y. Wang et al., Texture and microstructure evolution during different rolling methods in strip-cast grain-oriented 6.5% Si steel, J. Magn. Magn. Mater. 499, 166251 (2020) [CrossRef] [Google Scholar]
  6. H. Pirgazi, R. Petrov, L. Kestens, Effect of grain boundary-magnetic domain interaction on the magnetization behavior of non-oriented electrical steels, Steel Res Int. 87, 210 (2015) [Google Scholar]
  7. G. Zu, Y. Xu, L. Luo et al., Effect of rolling temperature on the recrystallization behavior of 4.5 wt.% Si non-oriented electrical steel, J. Mater. Res. Technol. 17, 365 (2022) [CrossRef] [Google Scholar]
  8. W. Dou, G. Yuan, M. Lan et al., The significance of microstructure and texture on magnetic properties of non-oriented silicon steel: strip casting versus conventional process, Steel Res. Int. 91, 1900286 (2019) [Google Scholar]
  9. Y. Luo, W. Yang, Q. Ren et al., Evolution of non-metallic inclusions and precipitates in oriented silicon steel, Metall. Mater. Trans. B 49B, 926 (2018) [Google Scholar]
  10. Y. Liu, C. Zhu, L. Huang et al., Influence of inclusions on magnetic properties of Al-killed non-oriented silicon steels, JOM 74, 2645 (2022) [Google Scholar]
  11. J. Wang, Q. Ren, Y. Luo et al., Effect of non-metallic precipitates and grain size on core loss of non-oriented electrical silicon steels, J. Magn. Magn. Mater. 451, 454 (2017) [Google Scholar]
  12. H. Wang, Y. Bao, J. Zhi et al., Effect of rare earth ce on the morphology and distribution of Al2O3 inclusions in high strength IF steel containing phosphorus during continuous casting and rolling process, ISIJ Int. 61, 657–666 (2021) [Google Scholar]
  13. H. Wang, Y. Niu, H. Ling et al., Effects of rare earth La-Ce alloying treatment on modification of inclusions and magnetic properties of W350 non-oriented silicon steel, Metals 13, 626 (2023) [CrossRef] [Google Scholar]
  14. Q. Wang, L.J. Wang, Y.Q. Liu et al., Using Ce to modify Al2O3 inclusion in spring steel, J. Min. Metall. B 53, 365 (2017) [Google Scholar]
  15. Q. Ren, Z. Hu, L. Cheng et al., Effect of rare earth elements on magnetic properties of non-oriented electrical steels, J. Magn. Magn. Mater. 560, 169624 (2022) [Google Scholar]
  16. Y. Li, Q. Wang, M. Sun et al., Experimental study on rare earth and magnesium composite treatment of 49MnVS3 non-quenched and tempered steel, Steel Res Int. 2021, 2100190 (2021) [CrossRef] [Google Scholar]
  17. X. Liu, L. Wang, Effects of rare earth addition on the inclusions and mechanical properties of 2205 duplex stainless steel, Adv. Mater. Res. 472–475, 411 (2012) [Google Scholar]
  18. Q. Ren, L. Zhang, Effect of cerium content on inclusions in an ultra-low-carbon aluminum-killed steel, Metal. Mater. Trans. B 51, 589 (2020) [Google Scholar]
  19. X. Wang, G. Li, Y. Liu et al., Cerium addition effect on modification of inclusions, primary carbides and microstructure refinement of H13 die steel, ISIJ Int. 61, 1850 (2021) [CrossRef] [Google Scholar]
  20. S. Luo, Z. Shen, Z. Yu et al., Effect of Ce addition on inclusions and grain structure in gear steel 20CrNiMo, Steel Res Int. 92, 200394 (2021) [Google Scholar]
  21. Q. Ren, Z. Hu, L. Cheng et al., Modification mechanism of lanthanum on alumina inclusions in a nonoriented electrical steel, Steel Res. Int. 93, 2200212 (2022) [CrossRef] [Google Scholar]
  22. S. Guo, H. Zhu, J. Zhao et al., Effects of nitrogen on the microstructure and mechanical properties of Fe-28Mn-10Al-0. 8C low-density steel, Steel Res. Int. 93, 2100347 (2021) [Google Scholar]
  23. Y. Huang, G. Cheng, S. Li et al., Precipitation behavior of large primary carbides in cast H13 steel, Steel Res. Int. 89, 1800371 (2018) [CrossRef] [Google Scholar]
  24. J. Zhang, G. Li, H. Wang et al., Evolution of inclusions in novel cryogenic high-Mn austenitic steel weld metal with cerium addition, Sci. Technol. Weld Joint. 28, 226 (2022) [Google Scholar]
  25. H. Li, Y. Yu, X. Ren et al., Evolution of Al2O3 inclusions by cerium treatment in low carbon high manganese steel, J. Iron Steel Res. Int. 24, 925 (2017) [CrossRef] [Google Scholar]
  26. X. Liu, J. Yang, L. Yang et al., Effect of Ce on inclusions and impact property of 2Cr13 stainless steel, J. Iron Steel Res. Int. 17, 59 (2010) [CrossRef] [Google Scholar]
  27. L. Yue, L. Wang, J. Han, Effects of rare earth on inclusions and corrosion resistance of 10PCuRE weathering steel, J. Rare Earth. 28, 952 (2010) [CrossRef] [Google Scholar]
  28. Z. He, Y. Sha, Y. Gao et al., Recrystallization texture development in rare-earth (RE)-doped non-oriented silicon steel, J. Iron Steel Res. Int. 27, 1339 (2020) [CrossRef] [Google Scholar]
  29. Y. Wan. W. Chen, S. Wu, Effect of lanthanum content on microstructure and magnetic properties of non-oriented electrical steels, J. Rare Earth. 31, 727 (2013) [CrossRef] [Google Scholar]
  30. E. Roos, A. Karasev, P. Jönsson, Effect of Si and Ce contents on the nozzle clogging in a REM alloyed stainless steel, Steel Res. Int. 86, 1279 (2015) [CrossRef] [Google Scholar]
  31. C. Zhu, X. Chen, L. Zhang et al., Effects of RE on precipitation behaviors of the inclusions and magnetic properties of non-oriented electrical steel, Mater. Sci. Forum, 852, 38–48 (2016) [CrossRef] [Google Scholar]
  32. Z. Li, S. Xie, G. Wang et al., Dependence of recrystallization behavior and magnetic properties on grain size prior to cold rolling in high silicon non-oriented electrical steel, J Alloy Compd. 888, 161576 (2021) [CrossRef] [Google Scholar]
  33. R. Wang, Y. Bao, Z. Yan et al., Comparison between the surface defects caused by Al2O3 and TiN inclusions in interstitial-free steel auto sheets, Int. J. Min. Met. Mater. 26, 178 (2019) [CrossRef] [Google Scholar]
  34. H. Wang, J. Li, C. Shi et al., Evolution of Al2O3 inclusions by magnesium treatment in H13 hot work die steel, Ironmak Steelmak. 44, 128 (2017) [CrossRef] [Google Scholar]
  35. Q. Ren, L. Zhang, Z. Hu et al., Transient influence of cerium on inclusions in an Al-killed non-oriented electrical steel, Ironmak Steelmak. 2, 1742 (2020) [Google Scholar]
  36. C. Song, L. Xiang, C. Shi et al., Effect of rare earth La-Ce on solidification structure of 3.2% Si-0.9% Al non-oriented silicon steel, ISIJ Int. 64, 1000–1009 (2024) [CrossRef] [Google Scholar]
  37. H. Wang, Y. Niu, H. Ling et al., Modification of rare earth Ce on inclusions in W350 non-oriented silicon steel, Metals 13, 453 (2023) [CrossRef] [Google Scholar]
  38. M.X. Zhang, P.M. Kelly, Edge-to-edge matching model for predicting orientation relationships and habit planes—the improvements, Scr. Mater. 52, 963 (2005) [CrossRef] [Google Scholar]
  39. L. Jing, Y. Pan, T. Lu et al., Nucleation potency prediction of LaB6 with E2EM model and its influence on microstructure and tensile properties of Al-7Si-0.3 Mg alloy, Nonferrous Met. Soc. China 28, 1687 (2018) [CrossRef] [Google Scholar]
  40. S. Ohba, Y. Saito, Y. Noda, A measurement of charge asphericity in iron metal[J], Acta Crystall. A 38, 725–729 (1982) [Google Scholar]
  41. B. Chen, C. Li, D. Deng et al., Temperature sensitive properties of Eu2+/Eu3+ dual-emitting LaAlO3 phosphors, J Alloy Compd. 792, 702–712 (2019) [CrossRef] [Google Scholar]
  42. W. Fu, D. Ijdo, “Unusual” phase transitions in CeAlO3, J. Solid State Chem. 179, 2732–2378 (2006) [CrossRef] [Google Scholar]
  43. B. Morosin, La2O2S structure refinement and crystal field, Acta Crystallogr. 29, 2647 (1973) [CrossRef] [Google Scholar]
  44. A. Kulbakov, S. Avdoshenko, I. Puente-Orench et al., J. Phys.: Condens. Matter. 33, 425802 (2021) [CrossRef] [Google Scholar]
  45. F. Wang, D. Qiu, Z. Liu et al., The grain refinement mechanism of cast aluminium by zirconium, Acta Mater. 61, 5636 (2013) [CrossRef] [Google Scholar]
  46. Z. Liu, D. Qiu, F. Wang et al., The grain refining mechanism of cast zinc through silver inoculation, Acta Mater. 79, 315 (2014) [CrossRef] [Google Scholar]
  47. M.X. Zhang, P.M. Kelly, Edge-to-edge matching and its applications: Part II. Application to Mg-Al, Mg-Y and Mg-Mn alloys, Acta Mater. 53, 1073 (2005) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.