A review: influence of refractories on steel quality
Metall. Res. Technol., 112 4 (2015) 410
Published online: 2015-09-18
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Interaction of Ladle Slag With Varying SiO2 Content and Recyclate‐Based MgO–C Refractories
Anton Yehorov, Eldar Salpagarov, Anhelina Mospan, Till Manon Jannis Stadtmüller, Thomas Schemmel, Christos Georgios Aneziris and Olena VolkovaAdvanced Engineering Materials (2026)
https://doi.org/10.1002/adem.202502888
A critical review of hydrogen-induced cracking (HIC) of API 5L pipeline steel grades in the oil and gas industry
Nasirudeen O. Ogunlakin, Ihsan ulhaq Toor, Ahmad A. Sorour and Milos B. DjukicInternational Journal of Hydrogen Energy 198 152669 (2026)
https://doi.org/10.1016/j.ijhydene.2025.152669
Flame-sprayed rice husk ash-based runner-brick refractories tested in steel casting experiments
Florian Kerber, Steffen Dudczig, Piotr Malczyk, Thomas Schemmel, Helge Jansen and Christos G. AnezirisJournal of the European Ceramic Society 46 (6) 118064 (2026)
https://doi.org/10.1016/j.jeurceramsoc.2025.118064
Low- and ultra-low-carbon carbon-containing refractories: Development, challenges, and prospects
Xueyin Liu, Guoqing Xiao, Benjun Cheng, Christos G. Aneziris and Shaowei ZhangCeramics International 52 (4) 4122 (2026)
https://doi.org/10.1016/j.ceramint.2025.12.262
(2026)
https://doi.org/10.2139/ssrn.6041984
Corrosion behavior and degradation mechanisms of lightweight magnesia-based monolithic refractories in an industrial tundish
Yulong Wang, Hui Yang, Yaping Cao, Yanan Song, Guoping Wei, Binxiang Fang, Wen Yan, Nan Li, Yu Zhang and Junfeng ChenCeramics International 51 (17) 24194 (2025)
https://doi.org/10.1016/j.ceramint.2025.03.105
Reaction mechanism between MgO and MgO–C lining refractories and an ultra-low-carbon Al-killed steel
Yujie Cheng, Jujin Wang and Lifeng ZhangMetallurgical Research & Technology 122 (1) 103 (2025)
https://doi.org/10.1051/metal/2024093
Reaction Mechanism between MgO and MgOC Lining Refractories and a High‐Carbon Al‐Killed Steel
Yujie Cheng, Wei Chen, Jujin Wang and Lifeng Zhangsteel research international 96 (1) (2025)
https://doi.org/10.1002/srin.202400364
Improvement of sintering densification, wetting behavior and corrosion resistance of calcium hexaaluminate doped with La2Ce2O7 for prospective clean steel smelting
Tianpeng Wen, Ze Yu, Lei Yuan, Zhengguo Yan, Zhaoyang Liu and Jingkun YuJournal of the Australian Ceramic Society (2025)
https://doi.org/10.1007/s41779-025-01309-6
Corrosion behaviour of alumina in CaCl2-CaO molten salts
D. Sri Maha Vishnu, Jagadeesh Sure and Carsten SchwandtCeramics International 51 (27) 52561 (2025)
https://doi.org/10.1016/j.ceramint.2025.09.013
Development and characterization of boron-free glazes for Al2O3-C stopper materials – A thermodynamic and DoE approach
Patrick Gehre, Eldar Salpagarov, Vasileios Roungos, Nora Brachhold, Undine Fischer and Christos G. AnezirisCeramics International 51 (29) 60515 (2025)
https://doi.org/10.1016/j.ceramint.2025.10.249
Towards improved mechanical strength and fracture toughness of mullite refractory ceramics: a review
Benard Ochieng Owino, Fatai Olufemi Aramide, Davies Oladayo Folorunso and Oladunni Oyelola AlabiJournal of the Australian Ceramic Society (2025)
https://doi.org/10.1007/s41779-025-01269-x
Corrosion behavior of tundish slag on MgO-based dry vibration mix during the casting of heavy rail steel
Hongguang Li, Shizhou Zhao, Wei Li, Mingli Xu and Shubiao YinCeramics International 51 (26) 50582 (2025)
https://doi.org/10.1016/j.ceramint.2025.08.288
Interaction between refractory for refining ladle and low-carbon low-silicon Al-killed molten steel
Tianyu Du, Xiang Zhang, Fubin Gao, Guojun Ma, Mengke Liu and Dingli ZhengIronmaking & Steelmaking: Processes, Products and Applications 52 (4-5) 487 (2025)
https://doi.org/10.1177/03019233241259297
Interaction between Molten Al‐Killed Mn–B Steel and Carbon‐Bonded MgO Refractories Based on Recyclates
Matheus Roberto Bellé, Lukas Neubert, Anton Yehorov, Till M. J. Stadtmüller, Christos G. Aneziris and Olena VolkovaAdvanced Engineering Materials (2025)
https://doi.org/10.1002/adem.202502360
Application of advanced numerical material models for the simulation of a thermal shock on a ladle shroud
Zain Ali and Dietmar GruberEngineering Fracture Mechanics 325 111338 (2025)
https://doi.org/10.1016/j.engfracmech.2025.111338
Corrosion of MgO–C Refractory with Ladle Slags
Xingwen Wei, Anton Yehorov and Olena Volkovasteel research international 96 (5) (2025)
https://doi.org/10.1002/srin.202400147
301 (2025)
https://doi.org/10.1007/978-981-97-9638-0_12
Reoxidation Phenomena of Liquid Steel in Secondary Refining and Continuous Casting Processes: A Review
Joo Hyun Park and Youn‐Bae Kangsteel research international 95 (11) (2024)
https://doi.org/10.1002/srin.202300598
Effect of MgO–Cr2O3 and MgO–MgAl2O4-based refractories on refractory–steel interface reaction and cleanliness of pipeline steel
Guang-mei Yang, Cheng Yuan, Chang Liu, Qiang Wang, Guang-qiang Li, Yong-shun Zou and Ao HuangJournal of Iron and Steel Research International 31 (4) 849 (2024)
https://doi.org/10.1007/s42243-023-01043-y
Open-cell ceramic foam filters for melt filtration: Processing, characterization, improvement and application
Yajie Dai, Claudia Voigt, Enrico Storti, Jana Hubálková, Patrick Gehre, Xiong Liang, Wen Yan, Yawei Li and Christos G. AnezirisJournal of Materials Research and Technology 32 3402 (2024)
https://doi.org/10.1016/j.jmrt.2024.08.167
337 533 (2024)
https://doi.org/10.1007/978-3-031-40930-1_21
Refractory ceramics based on magnesium–aluminate spinel and periclase of the Satka deposit
Ales Buyakov, Vasiliy Shmakov, Andrey Zabolotsky, Yuri Chumakov and Evgeny ShilkoMaterials Chemistry and Physics 313 128760 (2024)
https://doi.org/10.1016/j.matchemphys.2023.128760
337 741 (2024)
https://doi.org/10.1007/978-3-031-40930-1_29
Insulating refractories based on rice husk ashes functionalized by flame-sprayed alumina coatings for steel ingot casting
Florian Kerber, Tilo Zienert, Marc Neumann, Piotr Malczyk, Thomas Schemmel, Helge Jansen and Christos G. AnezirisJournal of the European Ceramic Society 44 (12) 7296 (2024)
https://doi.org/10.1016/j.jeurceramsoc.2024.04.075
Interaction Behaviors of Ce‐Treated Al‐Killed Steel Grades with Different Refractories
Huixin Liu, Zhiyin Deng and Miaoyong Zhusteel research international 95 (9) (2024)
https://doi.org/10.1002/srin.202400313
Periclase-magnesium aluminate spinel ceramics filter with excellent purification efficiency on molten steel prepared from Mg(OH)2: Effect of fused MgO content
Wangding Peng, Zhe Chen, Wen Yan, Junfeng Chen, Guangqiang Li and Nan LiJournal of the European Ceramic Society 44 (15) 116772 (2024)
https://doi.org/10.1016/j.jeurceramsoc.2024.116772
The effect of pre-dehydrated magnesium-silicate-hydrate on the properties of the castables bonded with hydrable magnesium carboxylate
Jianjun Chen, Junrui Yang, Guoqing Xiao, Donghai Ding, Chaofan Yin, Qingfeng Wang, Xue Li, Yunfei Zang, Binbin Dong and Fei XiongCeramics International 50 (24) 53502 (2024)
https://doi.org/10.1016/j.ceramint.2024.10.200
Weak magnetic effect and free radical reaction mechanism on the dissolution of lightweight magnesia in CaO–Al2O3–SiO2 melts
Xinyu Chen, Ao Huang, Shenghao Li, Huazhi Gu, Lvping Fu and Meijie ZhangChemical Engineering Journal 496 154237 (2024)
https://doi.org/10.1016/j.cej.2024.154237
337 489 (2024)
https://doi.org/10.1007/978-3-031-40930-1_19
The Relationship Between Structural Features and Local Mechanical Properties of a Fine-Grained Matrix in Refractory Ceramic Materials. SiO2 Ceramics Case Study
A. A. Lapshina, E. V. Shilko, A. S. Buyakov, A. Y. Smolin and K. AndreevRussian Physics Journal 67 (4) 388 (2024)
https://doi.org/10.1007/s11182-024-03135-y
Dynamic interaction between refractory and low‐carbon low‐silicon Al‐killed steel
Xiang Zhang, Tianyu Du, Guojun Ma, Yanghui Xu, Dingli Zheng and Mengke LiuInternational Journal of Ceramic Engineering & Science 6 (6) (2024)
https://doi.org/10.1002/ces2.10240
337 163 (2024)
https://doi.org/10.1007/978-3-031-40930-1_7
Effect of Rare‐Earth Oxides Containing Refractories on the Cleanliness of Al‐Killed Steels
Cheng Yuan, Guang qiang Li, Ze Meng, Yong shun Zou, Ao Huang, Wen Yan and Yu Liusteel research international 95 (2) (2024)
https://doi.org/10.1002/srin.202300389
In situ layer formation on MgO–C refractories with different MgO grade by static and dynamic contact with liquid steel
Florian Kerber, Tilo Zienert, Konrad Kerber, Steffen Dudczig, Thomas Schemmel, Helge Jansen and Christos G. AnezirisOpen Ceramics 15 100424 (2023)
https://doi.org/10.1016/j.oceram.2023.100424
Effect of Al Content in Steel on Interfacial Interaction between Molten Steel and MgO Substrate
Yigui Lao, Yunming Gao, Cheng Yuan and Guangqiang Listeel research international 94 (6) (2023)
https://doi.org/10.1002/srin.202200778
Interaction between microporous magnesia castable and 38CrMoAl steel
Cheng Yuan, Yu Liu, Guang-qiang Li, Yong-shun Zou and Ao HuangJournal of Iron and Steel Research International 30 (3) 516 (2023)
https://doi.org/10.1007/s42243-022-00818-z
Phase analysis of complex non-metallic inclusions in Al-deoxidized 42CrMo4 steel after contact with MgO–C refractories
Florian Kerber, Nora Bachhold, Piotr Malczyk, Thomas Schemmel, Helge Jansen and Christos G. AnezirisOpen Ceramics 16 100481 (2023)
https://doi.org/10.1016/j.oceram.2023.100481
Eco-friendly design of complex refractory aggregates as alternatives to the magnesia-chromite ones
O.H. Borges, F.G. Coury, D.N.F. Muche and V.C. PandolfelliJournal of the European Ceramic Society 43 (14) 6536 (2023)
https://doi.org/10.1016/j.jeurceramsoc.2023.06.023
A comparison study on the dissolution mechanism of Al2O3 inclusion on fluorine-bearing and fluorine-free molten mold fluxes
Li Zhang, Wanlin Wang, Lei Zhang, Jie Zeng and Xu GaoCeramics International 49 (16) 27176 (2023)
https://doi.org/10.1016/j.ceramint.2023.05.262
Cyclic Solid-Liquid Phase Transformations in the $$\text {CaO}$$–$$\text {SiO}_2$$ System—Experiments and Modelling
Daniel Marian Ogris, Volkmar Kircher and Ernst GamsjägerMetallurgical and Materials Transactions B 54 (3) 1555 (2023)
https://doi.org/10.1007/s11663-023-02783-8
Simultaneous enhance of the thermal shock resistance and slag-penetration resistance for tundish flow-control refractories: The role of microporous magnesia
Yongshun Zou, Huazhi Gu, Ao Huang, Lvping Fu, Guangqiang Li, Liwang Wang and Ding ChenMaterials & Design 233 112245 (2023)
https://doi.org/10.1016/j.matdes.2023.112245
https://doi.org/10.1002/9781119790860.ch8
Formation Mechanism, Evolution and Modification of Non-Metallic Inclusions in Al-killed, Ti-Alloyed Steel Melt: A Review
Sanjay Pindar and Manish M. PandeTransactions of the Indian Institute of Metals 76 (10) 2587 (2023)
https://doi.org/10.1007/s12666-023-02947-9
Automated feature analysis as a tool for non-metallic inclusion analysis in solidified metals
Florian Kerber, Marc Neumann, Steffen Dudczig, Gert Schmidt, Jana Hubálková and Christos G. AnezirisOpen Ceramics 16 100452 (2023)
https://doi.org/10.1016/j.oceram.2023.100452
Elucidating the role of Ti3AlC2 and Ti3SiC2 in oxidation mechanisms of MgO–C refractories
Tao Zhang, Junfeng Chen, Yu Zhang, Wen Yan, Shaowei Zhang and Nan LiCeramics International 49 (7) 11257 (2023)
https://doi.org/10.1016/j.ceramint.2022.11.324
Physical properties and corrosion resistance of magnesia-calcium hexaaluminate refractories to molten steel
Shizhou Zhao, Huazhi Gu, Ao Huang and Zhengliang XueCeramics International 49 (2) 3041 (2023)
https://doi.org/10.1016/j.ceramint.2022.09.288
Wetting of Refractory Ceramics with High-Manganese and Structural Steel and Description of Interfacial Interaction
Vlastimil Novák, Lenka Řeháčková, Silvie Rosypalová and Dalibor MatýsekCrystals 12 (12) 1782 (2022)
https://doi.org/10.3390/cryst12121782
Significance of Nonmetallic Inclusions for the Clogging Phenomenon in Continuous Casting of Steel––A Review
Susanne K. Michelic and Christian Bernhardsteel research international 93 (7) (2022)
https://doi.org/10.1002/srin.202200086
State of the Art in Control of Inclusions and Microalloying Elements in Tire Cord Steel and Saw Wire Steel
Changyong Chen, Meng Sun, Xiaoqing Chen, Bao Wang, Jianan Zhou and Zhouhua Jiangsteel research international 93 (4) (2022)
https://doi.org/10.1002/srin.202100507
The interaction of carbon-bonded ceramics with Armco iron
Xingwen Wei, Enrico Storti, Steffen Dudczig, Anton Yehorov, Olga Fabrichnaya, Christos G. Aneziris and Olena VolkovaJournal of the European Ceramic Society 42 (11) 4676 (2022)
https://doi.org/10.1016/j.jeurceramsoc.2022.04.058
Identifying Oxide and CaS Non-Metallic Inclusions in Steel with Raman Spectroscopy
Francis Gyakwaa, Tuomas Alatarvas, Qifeng Shu and Timo FabritiusMetals 13 (1) 43 (2022)
https://doi.org/10.3390/met13010043
Phenomenon of Whiskers Formation in Al2O3−C Refractories
Xingwen Wei, Anton Yehorov, Enrico Storti, Steffen Dudczig, Olga Fabrichnaya, Christos G. Aneziris and Olena VolkovaAdvanced Engineering Materials 24 (2) (2022)
https://doi.org/10.1002/adem.202100718
Formation of Interface Layers between Corundum‐Based Refractory Ceramics with Carbon Additions and Molten 42CrMo4 Steel
Anton Salomon, Mykhaylo Motylenko and David RafajaAdvanced Engineering Materials 24 (2) (2022)
https://doi.org/10.1002/adem.202100690
Preparation, microstructure and properties of Al2O3–ZrO2–C slide plate material in presence of nanoscale oxides
Zihao Wang, Kai Su, Jinxing Gao, Quanli Jia, Zongtao Zhang and Xinhong LiuCeramics International 48 (7) 10126 (2022)
https://doi.org/10.1016/j.ceramint.2021.12.223
Temperature-dependent rehydration of magnesium silicate hydrate (M-S-H): Development of no-cement binder through MD/DFT validation
Yu Zhang, Mithun Nath, Junkai Wang, Yawei Li, SiSi Zhang, Tianbin Zhu, Zhengliang Xue and Junfeng ChenCeramics International 48 (5) 7063 (2022)
https://doi.org/10.1016/j.ceramint.2021.11.265
Effect of magnesia-calcium hexaaluminate refractories on the quality of low-carbon alloy steel
Shizhou Zhao, Huazhi Gu, Ao Huang and Zhengliang XueCeramics International 48 (21) 31181 (2022)
https://doi.org/10.1016/j.ceramint.2022.06.193
Effect of CaCO3 addition on thermal shock resistance of MgO-ZrO2 composites
Yongyi Ling, Xuekun Tian, Kai Su, Zihao Wang, Jiaxin Shen, Qiankun Geng, Hongsen Wang, Fei Zhao, Quanli Jia and Xinhong LiuCeramics International 48 (23) 34308 (2022)
https://doi.org/10.1016/j.ceramint.2022.08.008
Interaction of molten Armco iron with various ceramic substrates at 1600 °C
Xingwen Wei, Steffen Dudczig, Enrico Storti, Mariia Ilatovskaia, Rie Endo, Christos G. Aneziris and Olena VolkovaJournal of the European Ceramic Society 42 (5) 2535 (2022)
https://doi.org/10.1016/j.jeurceramsoc.2022.01.011
Suppressing initial clog deposits on inner surface of submerged entry nozzle refractory for casting liquid steel: Absorbing CO gas by CO absorbers
Joo-Hyeok Lee, Janghoon Kim, Myeong-Hun Kang and Youn-Bae KangJournal of the European Ceramic Society 42 (13) 6275 (2022)
https://doi.org/10.1016/j.jeurceramsoc.2022.05.078
Distinguishing of carbons and oxidation behaviour (Part 1): Exploring model-free kinetics and RAMAN spectroscopy as a synergistic approach for evaluating carbon-bonded-refractories
Ebrima Sallah, Wafaa Al-Shatty, Cameron Pleydell-Pearce, Andy J. London and Chris SmithCarbon Trends 8 100174 (2022)
https://doi.org/10.1016/j.cartre.2022.100174
Production of Ceramic Plates Based on Al2O3–TiB2 by Free SHS Compression
A. P. Chizhikov and A. S. KonstantinovRefractories and Industrial Ceramics 62 (1) 94 (2021)
https://doi.org/10.1007/s11148-021-00565-w
Characterization of mullite-Nd2O3 composite prepared through spark plasma sintering
Ehsan Ghasali, Yasin Orooji, Aida Faeghi-nia, Masoud Alizadeh and Touradj EbadzadehCeramics International 47 (11) 16200 (2021)
https://doi.org/10.1016/j.ceramint.2021.02.198
Comparison study of slag corrosion resistance of MgO–MgAl2O4, MgO–CaO and MgO–C refractories under electromagnetic field
Xin-ming Ren, Bei-yue Ma, Shi-ming Li, et al.Journal of Iron and Steel Research International 28 (1) 38 (2021)
https://doi.org/10.1007/s42243-020-00421-0
Production of ceramic plates based on Al2O3‒TiB2 by free SHS compression
A. P. Chizhikov and A. S. KonstantinovNOVYE OGNEUPORY (NEW REFRACTORIES) 1 (2) 35 (2021)
https://doi.org/10.17073/1683-4518-2021-2-35-39
Clogging Behavior of a Submerged Entry Nozzle for the Casting of Ca-Treated Al-Killed Ti-Bearing Steel
Limei Cheng, Lifeng Zhang, Ying Ren and Wen YangMetallurgical and Materials Transactions B 52 (3) 1186 (2021)
https://doi.org/10.1007/s11663-021-02110-z
Impact of MgO-C with CMA- and Nanocarbon Addition on Steel Cleanliness
Patrick Gehre, Theresia Preisker, Steffen Dudczig, et al.Interceram - International Ceramic Review 70 (3) 26 (2021)
https://doi.org/10.1007/s42411-021-0461-0
Slag corrosion-resistance mechanism of lightweight magnesia-based refractories under a static magnetic field
Yongshun Zou, Ao Huang, Runfeng Wang, Lvping Fu, Huazhi Gu and Guangqiang LiCorrosion Science 167 108517 (2020)
https://doi.org/10.1016/j.corsci.2020.108517
Filter Coatings Based on Combination of Nanomaterials for Steel Melt Filtration
Enrico Storti, Ondřej Jankovský, David Sedmidubský, Steffen Dudczig and Christos G. AnezirisAdvanced Engineering Materials 22 (2) (2020)
https://doi.org/10.1002/adem.201900457
Effect of interactions between Fe–Al alloy and MgO-based refractory on the generation of MgO·Al2O3 spinel
Abdulaziz Alhussein, Wen Yang and Lifeng ZhangIronmaking & Steelmaking 47 (4) 424 (2020)
https://doi.org/10.1080/03019233.2018.1538181
Characterisation of Binary Phase Mixtures of Magnesium-Aluminate Spinel and Calcium-Aluminates Using Time-Gated Raman Spectroscopy
Francis Gyakwaa, Matti Aula, Tuomas Alatarvas, et al.ISIJ International 60 (5) 988 (2020)
https://doi.org/10.2355/isijinternational.ISIJINT-2019-576
Carbon‐Bonded Alumina Spaghetti Filters by Alginate‐Based Robo Gel Casting
Tony Wetzig, Anne Schmidt, Steffen Dudczig, Gert Schmidt, Nora Brachhold and Christos G. AnezirisAdvanced Engineering Materials 22 (2) (2020)
https://doi.org/10.1002/adem.201900657
State of the Art in the Control of Inclusions in Tire Cord Steels and Saw Wire Steels – A Review
Changyong Chen, Zhouhua Jiang, Yang Li, Lichun Zheng, Xinfeng Huang, Guang Yang, Meng Sun, Kui Chen, Hao Yang, Hao Hu and Huabing Listeel research international 90 (8) (2019)
https://doi.org/10.1002/srin.201800547
Impact of spinel forming systems (Fe-/Mg-/Mn-Al-O) as functional coating materials for carbon-bonded alumina filters on steel melt filtration
Benjamin Bock, Anne Schmidt, Edyta Sniezek, Steffen Dudczig, Gert Schmidt, Jacek Szczerba and Christos G. AnezirisCeramics International 45 (4) 4499 (2019)
https://doi.org/10.1016/j.ceramint.2018.11.131
Understanding the Formation and Evolution of Oxide Inclusions in Si-Deoxidized Spring Steel
Sha Lyu, Xiaodong Ma, Zongze Huang, et al.Metallurgical and Materials Transactions B 50 (4) 1862 (2019)
https://doi.org/10.1007/s11663-019-01613-0
Non-metallic inclusions in steels – origin and control
André Luiz Vasconcellos da Costa e SilvaJournal of Materials Research and Technology 7 (3) 283 (2018)
https://doi.org/10.1016/j.jmrt.2018.04.003
Interface Analyses Between a Case-Hardened Ingot Casting Steel and Carbon-Containing and Carbon-Free Refractories
Jens Fruhstorfer, Steffen Dudczig, Martin Rudolph, et al.Metallurgical and Materials Transactions B 49 (3) 1499 (2018)
https://doi.org/10.1007/s11663-018-1216-9
Focused ion beam preparation and microscopy investigation of secondary layer on carbon-bonded alumina filter after steel contact
Enrico Storti, Harry Berek and Christos G. AnezirisCeramics International 44 (12) 14502 (2018)
https://doi.org/10.1016/j.ceramint.2018.05.065
Interactions of Alumina-Based and Magnesia-Based Refractories with Iron Melts and Slags: A Review
R. Sarkar and H. Y. SohnMetallurgical and Materials Transactions B 49 (4) 1860 (2018)
https://doi.org/10.1007/s11663-018-1300-1
Intrinsic permeability of refractories from gas permeability measurements: Comparison of results
Emmanuel de Bilbao, Lise Loison, Yassine Hbiriq, Cédric Orgeur, Séverine Brassamin, Thorsten Tonnesen and Jacques PoirierCeramics International 44 (3) 2900 (2018)
https://doi.org/10.1016/j.ceramint.2017.11.038
Development and testing of carbon-bonded alumina foam filters for continuous casting of steel
Tony Wetzig, Bruno Luchini, Steffen Dudczig, Jana Hubálková and Christos G. AnezirisCeramics International 44 (15) 18143 (2018)
https://doi.org/10.1016/j.ceramint.2018.07.022
Nano-functionalization of carbon-bonded alumina using graphene oxide and MWCNTs
Ondřej Jankovský, Enrico Storti, Kirsten Moritz, et al.Journal of the European Ceramic Society 38 (14) 4732 (2018)
https://doi.org/10.1016/j.jeurceramsoc.2018.04.068
Classification and Characteristics of Predominant Refractories Used in Metallurgy
Burcu ErtuğAdvanced Engineering Forum 26 9 (2018)
https://doi.org/10.4028/www.scientific.net/AEF.26.9
9th International Symposium on High-Temperature Metallurgical Processing
Pengcheng Xiao, Xiaoyan Wu, Qingjun Zhang, Yihua Han and Liguang ZhuThe Minerals, Metals & Materials Series, 9th International Symposium on High-Temperature Metallurgical Processing 525 (2018)
https://doi.org/10.1007/978-3-319-72138-5_51
Functionalized Carbon‐Bonded Filters with an Open Porous Alumina Coating: Impact of Time on Interactions and Steel Cleanliness
Anne Schmidt, Anton Salomon, Steffen Dudczig, Harry Berek, David Rafaja and Christos G. AnezirisAdvanced Engineering Materials 19 (9) (2017)
https://doi.org/10.1002/adem.201700170
Filter Functionalization with Carbon Nanotubes and Alumina Nanosheets for Advanced Steel Filtration
Enrico Storti, Steffen Dudczig, Anne Schmidt, Gert Schmidt and Christos G. Anezirissteel research international 88 (10) 1700142 (2017)
https://doi.org/10.1002/srin.201700142
The Application of Computational Thermodynamics in the Understanding and Control of Clogging and Scum in Continuous Casting of Steel
T. Botelho, G. Medeiros, G. L. Ramos and A. Costa e SilvaJournal of Phase Equilibria and Diffusion 38 (3) 201 (2017)
https://doi.org/10.1007/s11669-017-0525-z
Interactions between Exogenous Magnesia Inclusions with Endogenous Inclusions in a High Alloyed Steel Melt
Christina Schröder, Undine Fischer, Anne Schmidt, Gert Schmidt, Olena Volkova and Christos G. AnezirisAdvanced Engineering Materials 19 (9) (2017)
https://doi.org/10.1002/adem.201700146
Advances in Molten Slags, Fluxes, and Salts: Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts 2016
Andrie Garbers-CraigAdvances in Molten Slags, Fluxes, and Salts: Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts 2016 1077 (2016)
https://doi.org/10.1007/978-3-319-48769-4_115
Effect of Magnesia-Carbon Refractory on the Kinetics of MgO·Al2O3 Spinel Inclusion Generation in Extra-Low Oxygen Steels
Chunyang Liu, Fuxiang Huang, Jinliang Suo and Xinhua WangMetallurgical and Materials Transactions B 47 (2) 989 (2016)
https://doi.org/10.1007/s11663-015-0540-6
1077 (2016)
https://doi.org/10.1002/9781119333197.ch115