EDP Sciences logo
Subscriber Authentication Point
Search
Menu
All issues Volume 112 / No 4 (2015) Metall. Res. Technol., 112 4 (2015) 410 References
Free Access
Review
Issue
Metall. Res. Technol.
Volume 112, Number 4, 2015
Article Number 410
Number of page(s) 20
DOI https://doi.org/10.1051/metal/2015028
Published online 18 September 2015
  1. A.W. Cramb, Scand. J. Metall. 26 (1997) 2-7 [Google Scholar]
  2. Ph. Blumenfeld, M. Puillet, J. de Lorgeril, D. Verrelle, Effect of service conditions on wear mechanisms of steel ladle refractories, in Proceedings of UNITECR ’97, New Orleans, USA, 1997, pp. 13-219 [Google Scholar]
  3. J. Poirier, M.L. Bouchetou, Corrosion of refractories, measurements and thermodynamic modeling, 10th International Conference of European Ceramic Society, Berlin, Germany, 2007, pp. 7- 21 [Google Scholar]
  4. E. Blond, N. Schmitt, F. Hild, P. Blumenfeld, J. Poirier, J. Am. Ceram. Soc. 90 (2007) 154-162 [CrossRef] [Google Scholar]
  5. S. Zhang, W.E. Lee, Int. Mater. Rev. 45 (2000) 41-58 [CrossRef] [Google Scholar]
  6. P. Blumenfeld, Réfractaires et qualité metal, CESSID, 22 au 24 sept, 1998 [Google Scholar]
  7. F. Qafssaoui, J. Poirier, J.P. Ildefonse, P. Hubert, Refractories 1 (2005) 2-8 [Google Scholar]
  8. D. Brachet, F. Masse, J. Poirier, G. Provost, J. Canada. Ceram. Soc. 58 (1989) 61-66 [Google Scholar]
  9. K. Tsubota, I. Fukumoto, in Proceedings of the 6th International Iron and Steel Congress, Nagoya, Japan, 1990, Vol. 3, p. 637 [Google Scholar]
  10. C.W. Bale, P. Chartrand, S.A. Degterov, G. Eriksson, K. Hack, R. Ben Mahfoud, J. Melançon, A.D. Pelton, S. Petersen, Calphad 26 (2002) 189-228 [CrossRef] [Google Scholar]
  11. P. Riboud, R. Vasse, Revue de Métallurgie 82 (1985) 801-810 [Google Scholar]
  12. G. Provost, Revue de métallurgie 2 (1987) 109-122 [Google Scholar]
  13. B. Bergmann, H. Wagner, N. Bannenberg, Revue de Métallurgie 4 (1989) 312-316 [Google Scholar]
  14. F. Faries, P. Gibbins, C. Graham, Ironmak. Steelmak. 13 (1986) 26-31 [Google Scholar]
  15. Slag Atlas, 2nd edition, edited by VDEh, Verlag Stahleisen GmbH, 1995 [Google Scholar]
  16. B. Breyny, Reactivity of periclase with carbon in magnesia graphite refractories, in Proceedings of UNITECR’89, Anaheim, USA, 1989, pp. 369-395 [Google Scholar]
  17. H. Soulard, J. Lehmann, M. Boher, M.C. Kaerle, C. Gatellier, Interaction mechanisms between MgO-C and Al-killed steels, in Proceedings of UNITECR ’99, Berlin, Allemagne, 1999, pp. 301-303 [Google Scholar]
  18. J. Poirier, M.L. Bouchetou, F. Qafssaoui, JP. Ildefonse, J. Eur. Ceram. Soc. 28 (2008) 1557-1568 [CrossRef] [Google Scholar]
  19. M.A. Guiban, J. Poirier, J. de Lorgeril, V. Guyot, C. Diot, E. Hanse, P. Dumas, Development of new continuous refractories to reduce alumina clogging, Mc Master Symposium, Toronto, Canada, 2-4 June, 1998 [Google Scholar]
  20. J. Poirier, B. Thillou, Contribution of the refractory material of submerged nozzles to clogging, in Proceedings of the 37th International Colloquium on refractories, Aachen, Germany, 1994, pp. 114-118 [Google Scholar]
  21. O. Fumihiko, Y. Noriaki, Y. Kazuhiro, T. Shigeaki, The evaluation of anti-clogging materials for submerged entry nozzles, in Proceedings of UNITECR’2005, Orlando, USA, 2005, pp. 776-780 [Google Scholar]
  22. B. Prasad, J.K. Sabu, J.N. Tiwari, Design and development of anti-clogging nozzles for casting of aluminium killed steel, in Proceedings of the UNITECR’2007, Berlin, Germany, 2007, pp. 208-211 [Google Scholar]
  23. H.A. Jungblut, T.G. Scherrmann, Investigations to minimize hydrogen pick-up during casting, 3rd European Conference on Continuous Casting, Madrid, 1988, pp. 707-714 [Google Scholar]
  24. L. Dong-ha, L. Je-ha, C. Yong-Moon, U. Chang-Jung, Refinable lining material for clean steel in tundish, in Proceedins of the UNITECR’2007, Berlin, Germany, 2007, pp. 354-357 [Google Scholar]
  25. J. Lehmann, M. Boher, H. Gaye, M.C. Kaerle, An experimental study of the interactions between liquid steel and a MgO-based tundish refractory, 2nd Inter. Symp. on advances in refractories for the metallurgy industry, Montréal, Québec, 1996, pp. 151-165 [Google Scholar]
  26. M. Boher, J. Lehmann, C. Gatellier, M.C. Kaerle, Transfert de Mg des réfractaires de répartiteur vers un acier désoxydé Si-Mn, Les propriétés d’usage des réfractaires, Journées de rencontres industries-universités, Nancy, 1999 [Google Scholar]
  27. J. Lehmann, M. Boher, M.C. Kaerle, CIM Bulletin 90 (1997) 69-74 [Google Scholar]
  28. G. Provost, D. Gournay, J. de Lorgeril, F. Masse, La Revue de Métallurgie (1991) 55-63 [Google Scholar]
  29. D. Verrelle, W. Rose, A. Gasser, J. Poirier, J. Bomboir, Improvement in linear ladle sliding gate system by rotation of the sliding plate at the ladle stand AISTech 2008, The Iron and Steel Technology Conference and Exposition, Pittsburgh, USA, 5-8 May, 2008 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.