Metallurgical Research & Technology

Investigating the effect of holding duration at a deep cryogenic temperature on the wear behavior of DIN 1.2080 (D3) tool steel 401

K. Amini, A. Akhbarizadeh and S. Javadpour

Published online: 01 July 2015

DOI: https://doi.org/10.1051/metal/2015018

• Abstract
• PDF (4.846 MB)
• References

Free Access

Reduction of slivers by the use of an electromagnetic actuator 402

Michaël De Doncker and Jean-François Domgin

Published online: 12 August 2015

DOI: https://doi.org/10.1051/metal/2015019

• Abstract
• PDF (204.2 KB)
• References

Development and application of an off-line soft reduction model during continuous casting of high-carbon rectangular billet 403

Jie Zeng, Weiqing Chen, Guangshun Wang, Changfa Cao and Yongbin Gao

Published online: 12 August 2015

DOI: https://doi.org/10.1051/metal/2015020

• Abstract
• PDF (2.185 MB)
• References

Effet des éléments d’alliage sur la structure et les propriétés mécaniques des fontes ADI 404

Mohammed Iliasse Boulifa and Ali Hadji

Published online: 12 August 2015

DOI: https://doi.org/10.1051/metal/2015022

• Abstract
• PDF (2.341 MB)
• References

Influence of reoxidation by slag and air on inclusions in IF steel 405

Yiming Qin, Xinhua Wang, Fuxiang Huang, Bin Chen and Chenxi Ji

Published online: 12 August 2015

DOI: https://doi.org/10.1051/metal/2015025

• Abstract
• PDF (2.651 MB)
• References

Heat treatment cycle optimization for A707L5 copper-nickel steel 406

Carlo Mapelli, Silvia Barella, Andrea Gruttadauria, Davide Mombelli and Dario Ripamonti

Published online: 21 August 2015

DOI: https://doi.org/10.1051/metal/2015026

• Abstract
• PDF (1.153 MB)
• References

Investigation of precipitation and growth behavior of Ti inclusions in tire cord steel 407

Xiao-Feng Cai, Yan-Ping Bao, Ming Wang, Lu Lin, Ning-Chi Dai and Chao Gu

Published online: 21 August 2015

DOI: https://doi.org/10.1051/metal/2015023

• Abstract
• PDF (3.589 MB)
• References

Study on the kinetic mechanism of steel resulfurization by sulfur-bearing slag 408

Chunyang Liu, Fuxiang Huang, Xinhua Wang and Guangwei Yang

Published online: 14 September 2015

DOI: https://doi.org/10.1051/metal/2015021

• Abstract
• PDF (937.8 KB)
• References

Mass Action concentration model of CaO-MgO-FeO-Al₂O₃-SiO₂ slag systems and its application to the formation mechanism of MgO·Al₂O₃ spinel-type inclusion in casing steel 409

Haiyan Tang, Tuo Wu, Jian-lei Wang, Yong-chang Liang and Jingshe Li

Published online: 18 September 2015

DOI: https://doi.org/10.1051/metal/2015029

• Abstract
• PDF (1.831 MB)
• References

Free Access

Review

A review: influence of refractories on steel quality 410

Jacques Poirier

Published online: 18 September 2015

DOI: https://doi.org/10.1051/metal/2015028

• Abstract
• PDF (4.549 MB)
• References