Factors influencing melt fluidity of iron ore
Metall. Res. Technol., 115 5 (2018) 505
Published online: 2018-10-23
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Effect of SiO2 mass ratio on high-Ti vanadium titanomagnetite sintering at basicity of 2.0
Peng Hu, Jun-jie Zeng, Yu-xiao Xue, Rui Wang, Yong-da Li, Ning-yu Zhang, Shuo Zhang and Xue-wei LvJournal of Iron and Steel Research International 32 (4) 849 (2025)
https://doi.org/10.1007/s42243-025-01449-w
Effects of High-Temperature Characteristics of Calcium Ferrites on the Sinter Strength
Leonardo Tomas da Rocha, Seongkyu Cho, Sung-Wan Kim and Sung-Mo JungMetallurgical and Materials Transactions B 53 (5) 3306 (2022)
https://doi.org/10.1007/s11663-022-02612-4
Effects of Adding Iron Ores-based Calcium Ferrites to the Sinter Mix on Sinter Quality and Reduction of CO2, NO and SO2
Leonardo Tomas da rocha, Seongkyu Cho, Sung-Wan Kim and Sung-Mo JungISIJ International 62 (12) 2587 (2022)
https://doi.org/10.2355/isijinternational.ISIJINT-2022-127
Liquid Formation in Sinters and Its Correlation with Softening Behaviour
Vaishak Kamireddy, Dongqing Wang, Wen Pan, Shaoguo Chen, Tim Evans, Fengqiu Tang, Baojun Zhao and Xiaodong MaMetals 12 (5) 885 (2022)
https://doi.org/10.3390/met12050885
Improving the sinter productivity with increased specular iron ore in sinter blend
S. Kumar, A. Jaiswal and R. SahJournal of Mining and Metallurgy, Section B: Metallurgy 58 (2) 261 (2022)
https://doi.org/10.2298/JMMB210922009K
Distinct Difference in High-temperature Characteristics between Limonitic Nickel Laterite and Ordinary Limonite
Yuxiao Xue, Deqing Zhu, Jian Pan, et al.ISIJ International 62 (1) 29 (2022)
https://doi.org/10.2355/isijinternational.ISIJINT-2021-307
Experimental study on melt and flow characteristics and pore structure of iron ore
Mengting Ji, Jiawei Luo and Hao ZhouChemical Engineering Science 264 118185 (2022)
https://doi.org/10.1016/j.ces.2022.118185
A Study on the Effect of Alumina on the Morphology and Reduction Behavior of Sinter by In Situ Observation
Sang Gyun Shin, Wan Ho Kim and Dong Joon MinMetals 11 (5) 740 (2021)
https://doi.org/10.3390/met11050740
Improving High-Alumina Iron Ores Processing via the Investigation of the Influence of Alumina Concentration and Type on High-Temperature Characteristics
Yuxiao Xue, Jian Pan, Deqing Zhu, Zhengqi Guo, Congcong Yang, Liming Lu and Hongyu TianMinerals 10 (9) 802 (2020)
https://doi.org/10.3390/min10090802
Flow and penetration behaviours of liquid phase on iron ore substrate and their effects on bonding strength of sinter
Xiaobo Zhai, Shengli Wu, Heng Zhou, Lixin Su and Xvdong MaIronmaking & Steelmaking 47 (4) 405 (2020)
https://doi.org/10.1080/03019233.2018.1537223