EDP Sciences logo
Subscriber Authentication Point
Search
Menu
All issues Rev. Met. Paris, 102 12 (2005) 905-918 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

The high cycle fatigue behavior of niobium micro-alloyed high-Mn austenitic steel with unusual precipitation at 77 K

Pengjie Wang, Hanlin Song, Jie Li, Jinyi Ren and Zhenyu Liu
International Journal of Fatigue 197 108914 (2025)
https://doi.org/10.1016/j.ijfatigue.2025.108914

Review of Performance of Advanced High Strength Steels under Impact

Peikang Xia, Ilchat Sabirov, Roumen Petrov and Patricia Verleysen
Advanced Engineering Materials 27 (7) (2025)
https://doi.org/10.1002/adem.202402016

Numerical simulation of a rapid fatigue test of high Mn-TWIP steel via a high cycle fatigue constitutive law

L.A. Gonçalves, S. Jiménez, A. Cornejo, L.G. Barbu, S. Parareda and D. Casellas
International Journal of Fatigue 168 107444 (2023)
https://doi.org/10.1016/j.ijfatigue.2022.107444

A third generation CalPhaD assessment of the Fe–Mn–Ti system part I: The binary subsystems Fe–Mn, Fe–Ti and Mn–Ti

Alexander Walnsch, Andreas Leineweber and Mario J. Kriegel
Calphad 81 102555 (2023)
https://doi.org/10.1016/j.calphad.2023.102555

Material Properties of High-strength High Chromium TWIP Steel with Increased Corrosion Resistance

Pavel Podaný, Tomáš Studecký and Aleksandra Kocijan
Manufacturing Technology 23 (2) 241 (2023)
https://doi.org/10.21062/mft.2023.025

High Manganese TWIP Steel with Increased Corrosion Resistance

Pavel Podany, Tomas Gregor, Tomas Studecky and Crtomir Donik
Metals 12 (10) 1765 (2022)
https://doi.org/10.3390/met12101765

Controlling Mechanical Behavior of TWIP Steels by Tuning Texture and Stacking Faults

María Florencia Sklate Boja and Ana Velia Druker
Metallurgical and Materials Transactions A 53 (11) 3986 (2022)
https://doi.org/10.1007/s11661-022-06804-0

Tensile mechanical properties, deformation mechanisms, fatigue behaviour and fatigue life of 316H austenitic stainless steel: Effects of grain size

Lei Zhao, Xueyan Qi, Lianyong Xu, Yongdian Han, Hongyang Jing and Kai Song
Fatigue & Fracture of Engineering Materials & Structures 44 (2) 533 (2021)
https://doi.org/10.1111/ffe.13378

Thermo-Mechanical Simulation of Hybrid Welding of DP/AISI 316 and TWIP/AISI 316 Dissimilar Weld

Patrizia Perulli, Michele Dassisti and Giuseppe Casalino
Materials 13 (9) 2088 (2020)
https://doi.org/10.3390/ma13092088

Investigations on metallurgical and mechanical properties of resistant spot welded dissimilar joints between a high manganese steel and a low alloyed steel grade

C Frohwein, M Otto, M Ecke, S Jüttner and T Halle
IOP Conference Series: Materials Science and Engineering 882 (1) 012008 (2020)
https://doi.org/10.1088/1757-899X/882/1/012008

Stress corrosion cracking and precipitation strengthening mechanism in TWIP steels: progress and prospects

Temitope Olumide Olugbade
Corrosion Reviews 38 (6) 473 (2020)
https://doi.org/10.1515/corrrev-2020-0052

Effects of temperature and strain rate in strain hardening in torsion of a twinning-induced plasticity steel

Fernando de las Cuevas and Javier Gil Sevillano
Materials Science and Technology 35 (6) 669 (2019)
https://doi.org/10.1080/02670836.2019.1582181

The influence of combined gradient structure with residual stress on crack-growth behavior in medium carbon steel

Yao Wang, Lichao Yuan, Shijia Zhang, et al.
Engineering Fracture Mechanics 209 369 (2019)
https://doi.org/10.1016/j.engfracmech.2019.01.037

Deformation behaviour of low carbon high Mn twinning-induced plasticity steel

NK Tewary, SK Ghosh and S Chatterjee
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233 (3) 763 (2019)
https://doi.org/10.1177/0954406217730440

Fiber laser-MAG hybrid welding of DP/AISI 316 and TWIP/AISI 316 dissimilar weld

Giuseppe Casalino, Andrea Angelastro, Patrizia Perulli, Paolo Posa and Pasquale Russo Spena
Procedia CIRP 79 153 (2019)
https://doi.org/10.1016/j.procir.2019.02.035

Elektrik direnç punta kaynağı ile birleştirilen %15 deforme edilmiş TWIP çeliğinde kaynak akımının mikroyapı ve mekanik özellikler üzerindeki etkisi

Hakan AYDIN, Mümin TUTAR, Kemal DAVUT and Ali BAYRAM
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 35 (2) 803 (2019)
https://doi.org/10.17341/gazimmfd.530292

Overcoming the strength–ductility trade-off via the formation of a thermally stable and plastically unstable austenitic phase in cold-worked steel

I. Miyazaki, T. Furuta, K. Oh-ishi, et al.
Materials Science and Engineering: A 721 74 (2018)
https://doi.org/10.1016/j.msea.2018.02.075

Un estudio adicional de la cinética de recristalización y crecimiento de grano del acero twip laminado en frío

Fernando De las Cuevas, Claudio Aguilar and Javier Gil Sevillano
Revista de Metalurgia 54 (4) 131 (2018)
https://doi.org/10.3989/revmetalm.131

Mechanical Properties, Microstructure and Phase Composition of Thin Magnetron Sputtered TWIP Steel Foils

J. Kovac, A. Mehner, B. Köhler, B. Clausen and H.-W. Zoch
HTM Journal of Heat Treatment and Materials 72 (3) 168 (2017)
https://doi.org/10.3139/105.110326

Crystallisation of amorphous Fe – Ti – B alloys as a design pathway for nano-structured high modulus steels

R. Aparicio-Fernández, A. Szczepaniak, H. Springer and D. Raabe
Journal of Alloys and Compounds 704 565 (2017)
https://doi.org/10.1016/j.jallcom.2017.02.077

On deformation behavior of Fe-Mn based structural alloys

Piyas Chowdhury, Demircan Canadinc and Huseyin Sehitoglu
Materials Science and Engineering: R: Reports 122 1 (2017)
https://doi.org/10.1016/j.mser.2017.09.002

Quasi-static and dynamic deformation mechanisms interpreted by microstructural evolution in TWinning Induced Plasticity (TWIP) steel

Jaeyeong Park, Minju Kang, Seok Su Sohn, et al.
Materials Science and Engineering: A 684 54 (2017)
https://doi.org/10.1016/j.msea.2016.12.037

High-cycle fatigue properties and damage mechanisms of pre-strained Fe-30Mn-0.9C twinning-induced plasticity steel

B. Wang, P. Zhang, Q.Q. Duan, et al.
Materials Science and Engineering: A 679 258 (2017)
https://doi.org/10.1016/j.msea.2016.10.043

Wear Resistance under Non-Lubricated Condition of Nb-Containing TWIP Steel

V. H. Mercado, I. Mejía, Y. Salinas-Escutia and A. Bedolla-Jacuinde
MRS Advances 2 (61) 3765 (2017)
https://doi.org/10.1557/adv.2017.593

Mechanical Behavior and Microstructure Characteristics of Directionally Solidified TWIP Steel

Dan Wang, Kun Wang, Jianfeng Man, Jianzhong Yang and Fusheng Han
Metallurgical and Materials Transactions A 47 (7) 3423 (2016)
https://doi.org/10.1007/s11661-016-3485-8

Enhancing the crashworthiness of high-manganese steel by strain-hardening engineering, and tailored folding by local heat-treatment

Markus Bambach, Laura Conrads, Markus Daamen, Onur Güvenç and Gerhard Hirt
Materials & Design 110 157 (2016)
https://doi.org/10.1016/j.matdes.2016.07.065

On the potential of magnetron sputtering for manufacturing of thin high Mn TWIP steel foils

Julien Kovac, Jeremy Epp, Andreas Mehner, et al.
Surface and Coatings Technology 308 136 (2016)
https://doi.org/10.1016/j.surfcoat.2016.07.105

Fracture behaviour of a Fe–22Mn–0.6C–0.2V austenitic TWIP steel

Julie Lorthios, Matthieu Mazière, Xavier Lemoine, et al.
International Journal of Mechanical Sciences 101-102 99 (2015)
https://doi.org/10.1016/j.ijmecsci.2015.07.029

Nanoscale analysis of the influence of pre-oxidation on oxide formation and wetting behavior of hot-dip galvanized high strength steel

M. Arndt, J. Duchoslav, R. Steinberger, et al.
Corrosion Science 93 148 (2015)
https://doi.org/10.1016/j.corsci.2015.01.016

Role of copper and aluminum additions on the hydrogen embrittlement susceptibility of austenitic Fe–Mn–C TWIP steels

T. Dieudonné, L. Marchetti, M. Wery, et al.
Corrosion Science 82 218 (2014)
https://doi.org/10.1016/j.corsci.2014.01.022

Effects of Cyclic Pre-straining on Mechanical Properties of an Austenitic Microalloyed High-Mn Twinning-induced Plasticity Steel

A.S. Hamada, A. Järvenpää, M. Honkanen, et al.
Procedia Engineering 74 47 (2014)
https://doi.org/10.1016/j.proeng.2014.06.222

Temperature effect on twin formation kinetics and deformation behavior of Fe-18Mn-0.6C TWIP steel

Joong Eun Jung, Junho Park, Jung-Su Kim, et al.
Metals and Materials International 20 (1) 27 (2014)
https://doi.org/10.1007/s12540-014-1008-y

Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins

Yujie Wei, Yongqiang Li, Lianchun Zhu, et al.
Nature Communications 5 (1) (2014)
https://doi.org/10.1038/ncomms4580

Role of copper and aluminum on the corrosion behavior of austenitic Fe–Mn–C TWIP steels in aqueous solutions and the related hydrogen absorption

T. Dieudonné, L. Marchetti, M. Wery, et al.
Corrosion Science 83 234 (2014)
https://doi.org/10.1016/j.corsci.2014.02.018

Propiedades mecánicas a tracción y mecanismos de endurecimiento de un acero TWIP a altas velocidades de deformación: relación de Hall-Petch

Fernando De las Cuevas, Alessandro Ferraiuolo, L. Pentti Karjalainen and Javier Gil Sevillano
Revista de Metalurgia 50 (4) e031 (2014)
https://doi.org/10.3989/revmetalm.031

Portevin–Le Chatelier Effects in a High-Mn Austenitic Steel

Giorgio Scavino, Carolina Di Salvo, Paolo Matteis, Raffaella Sesana and Donato Firrao
Metallurgical and Materials Transactions A 44 (2) 787 (2013)
https://doi.org/10.1007/s11661-012-1445-5

On the Austenite Stability of a New Quality of Twinning Induced Plasticity Steel, Exploring New Ranges of Mn and C

Rafael Agnelli Mesquita, Reinhold Schneider, Katharina Steineder, Ludovic Samek and Enno Arenholz
Metallurgical and Materials Transactions A 44 (9) 4015 (2013)
https://doi.org/10.1007/s11661-013-1741-8

Nanoscale surface analysis on second generation advanced high strength steel after hot dip galvanizing

M. Arndt, J. Duchoslav, K. Preis, L. Samek and D. Stifter
Analytical and Bioanalytical Chemistry 405 (22) 7119 (2013)
https://doi.org/10.1007/s00216-013-6801-9

Low-cycle fatigue behavior of a high manganese austenitic twin-induced plasticity steel

Pengcheng Guo, Lihe Qian, Jiangying Meng, Fucheng Zhang and Laifeng Li
Materials Science and Engineering: A 584 133 (2013)
https://doi.org/10.1016/j.msea.2013.07.020

Performance and Characterization of TWIP Steels for Automotive Applications

R. W. Neu
Materials Performance and Characterization 2 (1) 244 (2013)
https://doi.org/10.1520/MPC20130009

Study on Cyclic Strain Localization and Fatigue Fracture Mechanism in High Manganese Twinning-Induced Plasticity Steels

Atef S. Hamada, David A. Porter, Jarkko Puustinen and L. Pentti Karjalainen
Materials Science Forum 762 411 (2013)
https://doi.org/10.4028/www.scientific.net/MSF.762.411

On the strain hardening and texture evolution in high manganese steels: Experiments and numerical investigation

Yongqiang Li, Lianchun Zhu, Yao Liu, et al.
Journal of the Mechanics and Physics of Solids 61 (12) 2588 (2013)
https://doi.org/10.1016/j.jmps.2013.08.007

Fatigue Behavior of Dual‐Phase and TWIP Steels for Lightweight Automotive Structures

Paolo Matteis, Giorgio Scavino, Fabio D'Aiuto and Donato Firrao
steel research international 83 (10) 950 (2012)
https://doi.org/10.1002/srin.201100329

High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships

O. Bouaziz, S. Allain, C.P. Scott, P. Cugy and D. Barbier
Current Opinion in Solid State and Materials Science 15 (4) 141 (2011)
https://doi.org/10.1016/j.cossms.2011.04.002

Microstructure Characteristics of an Fe-Mn-C TWIP Steel After Deformation

Yong-juan Dai, Di Tang, Zhen-li Mi and Jian-chong LÜ
Journal of Iron and Steel Research International 17 (9) 53 (2010)
https://doi.org/10.1016/S1006-706X(10)60142-2

Fatigue Behavior of Four High-Mn Twinning Induced Plasticity Effect Steels

A.S. Hamada, L.P. Karjalainen, A. Ferraiuolo, et al.
Metallurgical and Materials Transactions A 41 (5) 1102 (2010)
https://doi.org/10.1007/s11661-010-0193-7

Plastic Localization Phenomena in a Mn-Alloyed Austenitic Steel

G. Scavino, F. D’Aiuto, P. Matteis, P. Russo Spena and D. Firrao
Metallurgical and Materials Transactions A 41 (6) 1493 (2010)
https://doi.org/10.1007/s11661-010-0191-9

Metallurgische Herausforderungen neuer Legierungskonzepte am Beispiel von Induced Plasticity (IP)-Stählen

J. Wiener, G. Gigacher, S. Penz and C. Bernhard
BHM Berg- und Hüttenmännische Monatshefte 154 (1) 33 (2009)
https://doi.org/10.1007/s00501-008-0433-y

A Study of Microstructures and Tensile Properties of Two Fe-Mn-Al-Si-C Alloys

B. Bhattacharya, A.S. Sharma, S.S. Hazra and R.K. Ray
Metallurgical and Materials Transactions A 40 (5) 1190 (2009)
https://doi.org/10.1007/s11661-009-9797-1