Revue de Métallurgie

Results of hot direct rolling operation p. 729

J.S. Kim, Y. U-Sok, B.J. Kim, K.Ch. Shin and J.Y. Chung

Published online: 24 January 2017

DOI: https://doi.org/10.1051/metal/199289090729

• PDF (3.297 MB)

Le shifting vaut-il le déplacement ? p. 737

F. Degee, P. Cuche, B. Leurquin and J. Mignon

Published online: 24 January 2017

DOI: https://doi.org/10.1051/metal/199289090737

• PDF (3.463 MB)

Development of new gauge control system with interstand thickness meter for hot strip mill p. 745

K. Kimura, K. Oshima, M. Honjyo, M. Azuma and T. Nunokawa

Published online: 24 January 2017

DOI: https://doi.org/10.1051/metal/199289090745

• PDF (4.843 MB)

Rolling of Ni-based alloy (57Ni-15Cr 16Mo-3W) billets p. 755

T. Nakayama, K. Kobayashi, Y. Hitomi, T. Katabuchi, M. Terunuma and A. Yamanaka

Published online: 24 January 2017

DOI: https://doi.org/10.1051/metal/199289090755

• PDF (3.430 MB)

Kinetics and morphological aspects of the dissolution and reduction of hematite pellets in oxygen steelmaking converters p. 763

J.B.A. Kobesen, G. van Unen, A.B. Snoeijer, R. Boom and B. Deo

Published online: 24 January 2017

DOI: https://doi.org/10.1051/metal/199289090763

• PDF (5.450 MB)

Characteristics of molten steel flow and plasma heating in the tundish p. 773

T. Mine, H. Tokunaga and K. Imiya

Published online: 24 January 2017

DOI: https://doi.org/10.1051/metal/199289090773

• PDF (5.038 MB)

Development of the hard reduction method in the No. 3 bloom caster at Kobe works, Kobe Steel p. 783

K. Ebina, K. Fujii, S. Shimono, S. Toyoshima, K. Nakayama and I. Takagi

Published online: 24 January 2017

DOI: https://doi.org/10.1051/metal/199289090783

• PDF (4.515 MB)

Le sabre japonais Deuxième partie : Objet technique, objet d'art p. 793

J.M. Thorr and N. Chezeau

Published online: 24 January 2017

DOI: https://doi.org/10.1051/metal/199289090793

• PDF (8.220 MB)