Revue de Métallurgie

The influence of the groove series when hot rolling crack sensitive steel grades p. 895

T. Hansén

Published online: 24 January 2017

DOI: https://doi.org/10.1051/metal/199390070895

• Abstract
• PDF (9.290 MB)

Une méthode mixte, torsion- - dilatométrie, de simulation pour optimiser le laminage à chaud d'un acier p. 903

M. Carsi and F. Penalba

Published online: 20 January 2017

DOI: https://doi.org/10.1051/metal/199390030903

• Abstract
• PDF (11.20 MB)

Nouveau dispositif de refroidissement du fil sur le train d'Unimétal Longwy p. 911

M. Giard, P. Jacob, J.P. Konsler and S. Tassin

Published online: 20 January 2017

DOI: https://doi.org/10.1051/metal/199390030911

• Abstract
• PDF (7.085 MB)

Development of trimming technology for hot rolled ultra-low carbon steel p. 917

Y. Matsuda, M. Nishino and J. Ikeda

Published online: 24 January 2017

DOI: https://doi.org/10.1051/metal/199390070917

• Abstract
• PDF (6.246 MB)

Cold rolling technologies for high accuracy on new cold mill p. 923

H. Yamamoto, K. Baba, T. Niidome, H. Taniguchi, A. Ishihara and H. Uto

Published online: 24 January 2017

DOI: https://doi.org/10.1051/metal/199390070923

• Abstract
• PDF (8.185 MB)

Modélisation du processus de recuit de coils p. 931

F. Blum

Published online: 20 January 2017

DOI: https://doi.org/10.1051/metal/199390030931

• Abstract
• PDF (11.96 MB)

Utilisation de techniques neuromimétiques en laminage à froid au skin-pass de Sollac Florange p. 941

P. Bresson, E. Couriot, F. Alexandre and J.P. Haton

Published online: 20 January 2017

DOI: https://doi.org/10.1051/metal/199390030941

• Abstract
• PDF (8.725 MB)

Optimisation du dressage des poutrelles au train universel de Hayange p. 949

A. Arzur, P. Delebarre and J. Delebarre

Published online: 23 January 2017

DOI: https://doi.org/10.1051/metal/199390070949

• Abstract
• PDF (6.226 MB)

Numerical simulation of refractory erosion caused by carbon dissolution in a blast furnace p. 955

A. Preuer and J. Winter

Published online: 23 January 2017

DOI: https://doi.org/10.1051/metal/199390070955

• Abstract
• PDF (12.16 MB)

Combustion and heat transfer mechanism in iron bath smelting reduction furnace p. 965

A. Shinotake and Y. Takamoto

Published online: 23 January 2017

DOI: https://doi.org/10.1051/metal/199390070965

• Abstract
• PDF (10.61 MB)

Mise en service de deux tuyères supplémentaires sur le RH-OB de Sollac Dunkerque p. 975

G. Quenton, B. Bauvois and D. Brachet

Published online: 23 January 2017

DOI: https://doi.org/10.1051/metal/199390070975

• Abstract
• PDF (10.29 MB)

Cette méthode nous permet d’augmenter la marche à deux enceintes. p. 987

J.P. Lothier and J.L. Chassagne

Published online: 23 January 2017

DOI: https://doi.org/10.1051/metal/199390070987

• Abstract
• PDF (6.776 MB)

Behaviour of second phase particles in continuous casting process p. 993

Y. Tanizawa, M. Toyoda, K. Takatani and T. Hamana

Published online: 24 January 2017

DOI: https://doi.org/10.1051/metal/199390070993

• Abstract
• PDF (7.416 MB)

Dosage de l'aluminium soluble et insoluble dans l'acier par chimie et par spectrométrie p. 1001

G. Willay

Published online: 23 January 2017

DOI: https://doi.org/10.1051/metal/199390071001

• Abstract
• PDF (12.57 MB)