The outline of No.2 continuous galvanizing line at Kashima Works

H.  Gotoh; M.  Iwahashi; K.  Toyofuku; S.  Miki; A.  Yamauchi

doi:10.1051/metal/199491040575

All issues

Volume 91 / No 4 (Avril 1994)

Rev. Met. Paris, 91 4 (1994) 575-580

Abstract

Issue		Rev. Met. Paris Volume 91, Number 4, Avril 1994


Page(s)		575 - 580
DOI		https://doi.org/10.1051/metal/199491040575
Published online		20 January 2017

Rev. Met. Paris, Vol. 91, N°4 (Avril 1994), pp. 575–580

The outline of No.2 continuous galvanizing line at Kashima Works^*

Description de la ligne de galvanisation en continu n° 2 de l'usine de Kashima

H. Gotoh, M. Iwahashi, K. Toyofuku, S. Miki and A. Yamauchi

Abstract

In order to produce hot dip galvanized steel sheets mainly for the outer panels of auto-motive, the No. 2 continuous galvanizing line at Kashima Steel Works was constructed. Not only were the technologies of plant engineering and operation of the No. 3 CGL at the Wakayama Steel Works introduced, but also new technologies were developed in order to realize automatic operation, high productivity and improvement of product quality for this new CGL. A vertical type continuous annealing furnace using the direc flame reduction burners developed by SMI, with two interchangeable zinc pots to reduce and to be achieved by the combination galvannealing furnace which has features of a gas fired furnace and an inductive heating furnace.

^*

Subject of lecture at the ATS Steelmaking Conference 1993 (Paris, 15-16 December. 1993. Session 8).

© La Revue de Métallurgie 1994

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

Purchase access: €40